Custom Round air vent STL file ∅ 85 mm, slat angle: 30° with central reinforcement 📦#4896

STL Download STL 1
Create a new model easy
from scratch search for a model
3D model of a round grille for air circulation in STL format. Its male diameter is 85 mm. The slats have a slight angle of 30° and a high thickness of 2.2 mm. A centered vertical reinforcement reinforces the slats. This aeration grille has a prominent flange of 20 mm. The total diameter of this model is 125 mm.
Generation date: 2025-12-17
3D Model Round air vent STL file ∅ 85 mm, slat angle: 30° with central reinforcement

3D model download

Free
  • round-air-vent-dia85mm-slD30d-_model4896-nb0_dd{id}.stl : 5.9 Mo
STL Mesh quality : Linear deflection 0.1 Angular deflection 0.1
No compliance warranty No compliance warranty
(attribution - non commercial use - no derivatives)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Round air vent grill template, with the following values:
Parameter Value
#1 male diameter 85 mm (≃3.35 in)
#2 slat angle 30 °
#3 slat thickness 2.2 mm (≃0.09 in)
#4 flange width 20 mm (≃0.79 in)
#5 central reinforcement yes
Metadata Value
Total diameter (including flange) 125 mm (≃4.92 in)
Total thickness 25 mm (≃0.98 in)
illustration of the parameters
Parameter overview

  • The total thickness of the vent is 25 mm.
  • Whatever the parameters, the slats never overlap. This ensures an optimal airflow. At the same time, the slats form an almost opaque screen along the axis.
  • The slats are actually shaped as parallelograms rather than rectangles. This ensures better printability.
  • The slats and the central reinforcement (if present) feature a 0.40 mm fillet on all edges. This improves airflow and prevents potential whistling.
  • The collar, if present, is 3 mm thick and has a 2 mm fillet for aesthetic purposes.
  • The male insertion area is 3 mm thick and has a 1 mm fillet on both edges to facilitate insertion into the intended slot.
  • The central reinforcement, if present, is 2 mm thick and spans the entire projected width of the slats.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 male diameter dia
#2 slat angle slD
#3 slat thickness slT
#4 flange width flW
#5 central reinforcement renf

Related 3D models

To search for a model based on your own parameters, go to the template page Round air vent grill 

Round air vent STL 3D file ∅ 90 mm, slat angle: 35° with central reinforcement (📦 #1558)

1 object(s) - format STL
Round air vent STL 3D file ∅ 90 mm, slat angle: 35° with central reinforcement
Design of a round grille for air circulation in STL format. Its insertion diameter is 90 mm. The slats have an angle of 35° and a high thickness of 2.4 mm. A centered vertical reinforcement strengthens the whole structure. This aeration grille features a prominent flange of 18 mm. The total diameter of the model is 126 mm.
Parameter Value Unit
male diameter 90 mm
slat angle 35 °
slat thickness 2.4 mm
flange width 18 mm
central reinforcement yes

Round air vent STL 3D file ∅ 127.0 mm, slat angle: 30° with central reinforcement (📦 #3734)

1 object(s) - format STL
Round air vent STL 3D file ∅ 127.0 mm, slat angle: 30° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 127.0 mm. The slats have a slight angle of 30° and a high thickness of 2.0 mm. A vertical reinforcement strengthens the slats. This aeration grille has a prominent flange of 20 mm. The overall diameter of this model is 167 mm.
Parameter Value Unit
male diameter 127.0 mm
slat angle 30 °
slat thickness 2.0 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 80 mm, slat angle: 45° with central reinforcement (📦 #2384)

1 object(s) - format STL
Round air vent STL file ∅ 80 mm, slat angle: 45° with central reinforcement
File of a round air vent for ventilation in STL format. Its male diameter is 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille features a prominent flange of 20 mm. The overall diameter of the model is 120 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 92.5 mm, slat angle: 45° with central reinforcement (📦 #9885)

1 object(s) - format STL
Round air vent STL 3D file ∅ 92.5 mm, slat angle: 45° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 92.5 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement secures the whole structure. This 3D vent cover features a prominent flange of 20 mm. The full diameter of this model is 132.5 mm.
Parameter Value Unit
male diameter 92.5 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 94.2 mm, slat angle: 45° with central reinforcement (📦 #4206)

1 object(s) - format STL
Round air vent STL file ∅ 94.2 mm, slat angle: 45° with central reinforcement
Design of a round air vent for air circulation in STL format. Its male diameter measures 94.2 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This 3D vent grille features a prominent flange of 20 mm. The overall diameter of this model is 134.2 mm.
Parameter Value Unit
male diameter 94.2 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 71 mm, slat angle: 45° with central reinforcement (📦 #2053)

1 object(s) - format STL
Round air vent STL file ∅ 71 mm, slat angle: 45° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its insertion diameter measures 71 mm. The slats have an angle of 45° and a high thickness of 2.4 mm. A central reinforcement strengthens the slats. This ventilation grille has a prominent flange of 20 mm. The overall diameter of this model is 111 mm.
Parameter Value Unit
male diameter 71 mm
slat angle 45 °
slat thickness 2.4 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 113 mm, slat angle: 45° with central reinforcement (📦 #6103)

1 object(s) - format STL
Round air vent STL file ∅ 113 mm, slat angle: 45° with central reinforcement
Model of a round grille for ventilation in STL format. Its male diameter measures 113 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This vent cover features a prominent flange of 20 mm. The total diameter of the model is 153 mm.
Parameter Value Unit
male diameter 113 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 118 mm, slat angle: 45° with central reinforcement (📦 #1413)

1 object(s) - format STL
Round air vent STL file ∅ 118 mm, slat angle: 45° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 118 mm. The slats have an angle of 45° and a high thickness of 2.4 mm. A centered vertical reinforcement strengthens the slats. This 3D aeration grille has a prominent flange of 20 mm. The full diameter of the model is 158 mm.
Parameter Value Unit
male diameter 118 mm
slat angle 45 °
slat thickness 2.4 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 123 mm, slat angle: 45° with central reinforcement (📦 #1993)

1 object(s) - format STL
Round air vent STL file ∅ 123 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its male diameter is 123 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This aeration grille has a prominent flange of 20 mm. The total diameter of the model is 163 mm.
Parameter Value Unit
male diameter 123 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 130 mm, slat angle: 25° with central reinforcement (📦 #8567)

1 object(s) - format STL
Round air vent STL 3D file ∅ 130 mm, slat angle: 25° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its male diameter is 130 mm. The slats have a slight angle of 25° and a high thickness of 2.4 mm. A central reinforcement strengthens the slats. This vent cover has a prominent flange of 15 mm. The total diameter of this model is 160 mm.
Parameter Value Unit
male diameter 130 mm
slat angle 25 °
slat thickness 2.4 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement (📦 #1989)

1 object(s) - format STL
Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement
Model of a round air vent for air circulation in STL format. Its insertion diameter measures 125.2 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the slats. This vent cover has a prominent flange of 20 mm. The full diameter of the model is 165.2 mm.
Parameter Value Unit
male diameter 125.2 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 145.4 mm, slat angle: 35° with central reinforcement (📦 #10143)

1 object(s) - format STL
Round air vent STL file ∅ 145.4 mm, slat angle: 35° with central reinforcement
3D design of a round air vent for ventilation in STL format. Its insertion diameter is 145.4 mm. The slats have an angle of 35° and a high thickness of 2 mm. A central reinforcement secures the slats. This 3D vent cover features a prominent flange of 20 mm. The full diameter of the model is 185.4 mm.
Parameter Value Unit
male diameter 145.4 mm
slat angle 35 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 85 mm, slat angle: 10° with central reinforcement (📦 #9734)

1 object(s) - format STL
Round air vent STL 3D file ∅ 85 mm, slat angle: 10° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its male diameter is 85 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the whole structure. This aeration grille has a prominent flange of 20 mm. The overall diameter of the model is 125 mm.
Parameter Value Unit
male diameter 85 mm
slat angle 10 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 100 mm, slat angle: 45° with central reinforcement (📦 #6521)

1 object(s) - format STL
Round air vent STL 3D file ∅ 100 mm, slat angle: 45° with central reinforcement
Model of a round air vent for air circulation in STL format. Its insertion diameter measures 100 mm. The slats have an angle of 45° and a high thickness of 2.4 mm. A vertical reinforcement secures the whole structure. This 3D ventilation grille has a prominent flange of 15 mm. The full diameter of the model is 130 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 45 °
slat thickness 2.4 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 130 mm, slat angle: 40° with central reinforcement (📦 #4182)

1 object(s) - format STL
Round air vent STL file ∅ 130 mm, slat angle: 40° with central reinforcement
Design of a round grille for ventilation in STL format. Its male diameter is 130 mm. The slats have an angle of 40° and a high thickness of 2.4 mm. A central reinforcement secures the slats. This 3D ventilation grille has a prominent flange of 16 mm. The full diameter of the model is 162 mm.
Parameter Value Unit
male diameter 130 mm
slat angle 40 °
slat thickness 2.4 mm
flange width 16 mm
central reinforcement yes

Round air vent STL 3D file ∅ 68 mm, slat angle: 45° with central reinforcement (📦 #3618)

1 object(s) - format STL
Round air vent STL 3D file ∅ 68 mm, slat angle: 45° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its insertion diameter is 68 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement strengthens the slats. This ventilation grille features a prominent flange of 15 mm. The total diameter of this model is 98 mm.
Parameter Value Unit
male diameter 68 mm
slat angle 45 °
slat thickness 2 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 67 mm, slat angle: 10° with central reinforcement (📦 #6995)

1 object(s) - format STL
Round air vent STL file ∅ 67 mm, slat angle: 10° with central reinforcement
3D design of a round air vent for ventilation in STL format. Its insertion diameter measures 67 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement reinforces the slats. This vent cover features a prominent flange of 20 mm. The full diameter of this model is 107 mm.
Parameter Value Unit
male diameter 67 mm
slat angle 10 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 60 mm, slat angle: 10° with central reinforcement (📦 #3184)

1 object(s) - format STL
Round air vent STL file ∅ 60 mm, slat angle: 10° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its male diameter is 60 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement reinforces the whole structure. This 3D vent grille has a prominent flange of 20 mm. The full diameter of the model is 100 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 10 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 55 mm, slat angle: 45° with central reinforcement (📦 #2898)

1 object(s) - format STL
Round air vent STL 3D file ∅ 55 mm, slat angle: 45° with central reinforcement
3D design of a round grille for air circulation in STL format. Its male diameter measures 55 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement strengthens the whole structure. This ventilation grille features a prominent flange of 15 mm. The overall diameter of the model is 85 mm.
Parameter Value Unit
male diameter 55 mm
slat angle 45 °
slat thickness 2 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 50 mm, slat angle: 10° with central reinforcement (📦 #4781)

1 object(s) - format STL
Round air vent STL file ∅ 50 mm, slat angle: 10° with central reinforcement
3D model of a round air vent for ventilation in STL format. Its insertion diameter is 50 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement secures the whole structure. This vent grille features a prominent flange of 20 mm. The total diameter of the model is 90 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 10 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 123 mm, slat angle: 45° with central reinforcement (📦 #3583)

1 object(s) - format STL
Round air vent STL 3D file ∅ 123 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its male diameter is 123 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement strengthens the whole structure. This aeration grille has a prominent flange of 15 mm. The overall diameter of the model is 153 mm.
Parameter Value Unit
male diameter 123 mm
slat angle 45 °
slat thickness 2 mm
flange width 15 mm
central reinforcement yes

Round air vent STL 3D file ∅ 115 mm, slat angle: 10° with central reinforcement (📦 #2581)

1 object(s) - format STL
Round air vent STL 3D file ∅ 115 mm, slat angle: 10° with central reinforcement
Design of a round grille for ventilation in STL format. Its insertion diameter measures 115 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A centered vertical reinforcement secures the whole structure. This aeration grille has a prominent flange of 17 mm. The total diameter of the model is 149 mm.
Parameter Value Unit
male diameter 115 mm
slat angle 10 °
slat thickness 2 mm
flange width 17 mm
central reinforcement yes

Round air vent STL file ∅ 75 mm, slat angle: 10° with central reinforcement (📦 #5698)

1 object(s) - format STL
Round air vent STL file ∅ 75 mm, slat angle: 10° with central reinforcement
Model of a round air vent for ventilation in STL format. Its male diameter is 75 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This aeration grille has a prominent flange of 15 mm. The full diameter of the model is 105 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 10 °
slat thickness 2 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 145 mm, slat angle: 45° with central reinforcement (📦 #2493)

1 object(s) - format STL
Round air vent STL file ∅ 145 mm, slat angle: 45° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its male diameter measures 145 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the slats. This 3D ventilation grille has a prominent flange of 20 mm. The total diameter of this model is 185 mm.
Parameter Value Unit
male diameter 145 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 130 mm, slat angle: 10° with central reinforcement (📦 #4961)

1 object(s) - format STL
Round air vent STL 3D file ∅ 130 mm, slat angle: 10° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter measures 130 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement secures the whole structure. This aeration grille has a prominent flange of 20 mm. The total diameter of the model is 170 mm.
Parameter Value Unit
male diameter 130 mm
slat angle 10 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 80 mm, slat angle: 30° with central reinforcement (📦 #4125)

1 object(s) - format STL
Round air vent STL file ∅ 80 mm, slat angle: 30° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its male diameter measures 80 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This ventilation grille features a collar of 10 mm. The total diameter of this model is 100 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement (📦 #2063)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 92 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A central reinforcement secures the slats. This 3D vent grille has a flange of 10 mm. The overall diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 30 °
slat thickness 2.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement (📦 #2140)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter is 92 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This 3D vent cover has a flange of 10 mm. The total diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 95 mm, slat angle: 30° with central reinforcement (📦 #3237)

1 object(s) - format STL
Round air vent STL file ∅ 95 mm, slat angle: 30° with central reinforcement
3D model of a round grille for ventilation in STL format. Its male diameter measures 95 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A central reinforcement secures the slats. This 3D vent grille features a flange of 10 mm. The full diameter of this model is 115 mm.
Parameter Value Unit
male diameter 95 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes