Custom Enclosure with screw-mounted lid STL file: 225×75×50 mm (with ventilation on the lid and under the enclosure) 📦#4448
Generation date: 2025-12-08
3D model download
Free- object #0 enclosure-with-screw-mounted-l_model4448-nb0_dd{id}.stl : 1.6 Mo
- object #1 enclosure-with-screw-mounted-l_model4448-nb1_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
0.1
0.1
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Enclosure with screw-mounted lid template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | length | 225 mm (≃8.86 in) |
| #2 | width | 75 mm (≃2 15/16 in) |
| #3 | total height | 50 mm (≃1.97 in) |
| #4 | lid height | 10 mm (≃0.39 in) |
| #5 | wall thickness | 3 mm (≃1/8 in) |
| #6 | screw margin | 0 mm (0 in) |
| #7 | fit clearance | 0.1 mm (<0.01 in) |
| #8 | cooling level | 10 |
| #9 | cooling zone(s) | cutouts on both |
| Metadata | Value |
|---|---|
| Internal length excluding screw mounting posts | 219 mm (≃8 5/8 in) |
| Internal width excluding screw mounting posts | 69 mm (≃2.72 in) |
| Internal height | 42 mm (≃1.65 in) |
Parameter overview
- The thickness of the upper lid shell is always 5 mm.
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 length | len |
| #2 width | wid |
| #3 total height | Thei |
| #4 lid height | Lhei |
| #5 wall thickness | waT |
| #6 screw margin | Tmrg |
| #7 fit clearance | Imrg |
| #8 cooling level | cooL |
| #9 cooling zone(s) | cooZ |
Related 3D models
To search for a model based on your own parameters, go to the template page Enclosure with screw-mounted lid
Enclosure with screw-mounted lid STL file: 200×70×50 mm (with ventilation on the lid and under the enclosure) (📦 #6233)
2 object(s) - format STL
Enclosure with screwed lid in 3D STL format. The dimensions are 200 mm long by 70 mm wide and 50 mm high. The lid is 10 mm high. Wall thickness is 4 mm. This enclosure features significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 70 | mm |
| total height | 50 | mm |
| lid height | 10 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 155×55×60 mm (with ventilation on the lid and under the enclosure) (📦 #4250)
2 object(s) - format STL
Enclosure with screwed lid in 3D STL format. The dimensions are 155 mm long by 55 mm wide and 60 mm high. The cover only measures 10 mm high. Wall thickness is 3 mm. This enclosure features strong cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 155 | mm |
| width | 55 | mm |
| total height | 60 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 180×60×35 mm (with ventilation on the lid and under the enclosure) (📦 #7121)
2 object(s) - format STL
Download this enclosure with screwed lid in STL format. The dimensions are 180 mm long by 60 mm wide and 35 mm high. The lid measures 10 mm high. Wall thickness is 2 mm. This enclosure features significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 180 | mm |
| width | 60 | mm |
| total height | 35 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 200×100×45 mm (with ventilation on the lid and under the enclosure) (📦 #5697)
2 object(s) - format STL
Enclosure with lid in STL format. The dimensions are 200 mm long by 100 mm wide and 45 mm high. The cover measures 10 mm high. Wall thickness is 3 mm. This enclosure has strong cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 100 | mm |
| total height | 45 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 200×100×85 mm (with ventilation on the lid and under the enclosure) (📦 #2080)
2 object(s) - format STL
Download this enclosure model with screwed lid in 3D STL format. The dimensions are 200 mm long by 100 mm wide and 85 mm high. The cover only is 10 mm high. Side thickness is 3 mm. This enclosure has strong cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 100 | mm |
| total height | 85 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 200×120×45 mm (with ventilation on the lid and under the enclosure) (📦 #1142)
2 object(s) - format STL
Download this enclosure with lid in 3D STL format. The dimensions are 200 mm long by 120 mm wide and 45 mm high. The cover is 15 mm high. Side thickness is 4 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 120 | mm |
| total height | 45 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 180×70×36 mm (with ventilation on the lid and under the enclosure) (📦 #3328)
2 object(s) - format STL
Download this enclosure model with lid in STL format. The dimensions are 180 mm long by 70 mm wide and 36 mm high. The lid only measures 10 mm high. Wall thickness is 3 mm. This enclosure has cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 180 | mm |
| width | 70 | mm |
| total height | 36 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 4 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 120×60×50 mm (with ventilation on the lid and under the enclosure) (📦 #5883)
2 object(s) - format STL
Download this enclosure model with a screwed lid in 3D STL format. The dimensions are 120 mm long by 60 mm wide and 50 mm high. The cover is 15 mm high. Wall thickness is 3 mm. This enclosure has marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 50 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 198×100×56 mm (with ventilation under the enclosure) (📦 #3621)
2 object(s) - format STL
Download this enclosure with a screwed lid in 3D STL format. The dimensions are 198 mm long by 100 mm wide and 56 mm high. The lid only measures 10 mm high. Side thickness is 3 mm. This enclosure has cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 198 | mm |
| width | 100 | mm |
| total height | 56 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 4 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 152×83×56 mm (with ventilation on the lid and under the enclosure) (📦 #8805)
2 object(s) - format STL
Enclosure with screwed lid in STL format. The dimensions are 152 mm long by 83 mm wide and 56 mm high. The cover only measures 10 mm high. Wall thickness is 2 mm. This enclosure features strong cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 152 | mm |
| width | 83 | mm |
| total height | 56 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 200×120×75 mm (with ventilation under the enclosure) (📦 #4015)
2 object(s) - format STL
Download this enclosure model with lid in STL format. The dimensions are 200 mm long by 120 mm wide and 75 mm high. The lid only is 15 mm high. Side thickness is 3 mm. This enclosure has strong cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 120 | mm |
| total height | 75 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 120×100×55 mm (with ventilation under the enclosure) (📦 #3345)
2 object(s) - format STL
Download this enclosure model with lid in STL format. The dimensions are 120 mm long by 100 mm wide and 55 mm high. The lid is 15 mm high. Wall thickness is 3 mm. This enclosure has marked cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 100 | mm |
| total height | 55 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 120×60×60 mm (with ventilation on the lid and under the enclosure) (📦 #5580)
2 object(s) - format STL
Download this enclosure model with lid in STL format. The dimensions are 120 mm long by 60 mm wide and 60 mm high. The cover measures 10 mm high. Side thickness is 3 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 60 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 120×100×35 mm (with ventilation on the lid and under the enclosure) (📦 #4417)
2 object(s) - format STL
Download this enclosure with lid in 3D STL format. The dimensions are 120 mm long by 100 mm wide and 35 mm high. The lid is 10 mm high. Wall thickness is 2 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 100 | mm |
| total height | 35 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 220×100×60 mm (with ventilation on the lid) (📦 #1601)
2 object(s) - format STL
Download this enclosure with a screwed lid in STL format. The dimensions are 220 mm long by 100 mm wide and 60 mm high. The cover only measures 15 mm high. Wall thickness is 4 mm. This enclosure has strong cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 220 | mm |
| width | 100 | mm |
| total height | 60 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 200×130×60 mm (with ventilation on the lid and under the enclosure) (📦 #1247)
2 object(s) - format STL
Enclosure with screwed lid in 3D STL format. The dimensions are 200 mm long by 130 mm wide and 60 mm high. The cover only is 10 mm high. Wall thickness is 3 mm. This enclosure features cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 130 | mm |
| total height | 60 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 3 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 95×50×35 mm (with ventilation on the lid and under the enclosure) (📦 #8609)
2 object(s) - format STL
Enclosure with a screwed lid in STL format. The dimensions are 95 mm long by 50 mm wide and 35 mm high. The lid is 10 mm high. Wall thickness is 3 mm. This enclosure features strong cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 95 | mm |
| width | 50 | mm |
| total height | 35 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 180×130×60 mm (with ventilation on the lid and under the enclosure) (📦 #1249)
2 object(s) - format STL
Enclosure model with a screwed lid in STL format. The dimensions are 180 mm long by 130 mm wide and 60 mm high. The cover is 20 mm high. Wall thickness is 2 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 180 | mm |
| width | 130 | mm |
| total height | 60 | mm |
| lid height | 20 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 120×60×75 mm (with ventilation on the lid and under the enclosure) (📦 #2159)
2 object(s) - format STL
Enclosure with lid in 3D STL format. The dimensions are 120 mm long by 60 mm wide and 75 mm high. The lid only measures 10 mm high. Side thickness is 3 mm. This enclosure features marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 75 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 120×60×20 mm (with ventilation on the lid and under the enclosure) (📦 #5576)
2 object(s) - format STL
Download this enclosure with screwed lid in STL format. The dimensions are 120 mm long by 60 mm wide and 20 mm high. The lid measures 10 mm high. Wall thickness is 3 mm. This enclosure features marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 20 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 120×60×50 mm (with ventilation on the lid and under the enclosure) (📦 #5880)
2 object(s) - format STL
Download this enclosure with screwed lid in 3D STL format. The dimensions are 120 mm long by 60 mm wide and 50 mm high. The lid only is 15 mm high. Side thickness is 3 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 50 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 300×40×20 mm (with ventilation on the lid and under the enclosure) (📦 #4481)
2 object(s) - format STL
Download this enclosure with a screwed lid in 3D STL format. The dimensions are 300 mm long by 40 mm wide and 20 mm high. The lid only measures 10 mm high. Wall thickness is 2 mm. This enclosure features significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 300 | mm |
| width | 40 | mm |
| total height | 20 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 120×45×30 mm (with ventilation on the lid and under the enclosure) (📦 #1245)
2 object(s) - format STL
Enclosure with screwed lid in 3D STL format. The dimensions are 120 mm long by 45 mm wide and 30 mm high. The lid only measures 10 mm high. Wall thickness is 3 mm. This enclosure has marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 45 | mm |
| total height | 30 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 165×85×70 mm (with ventilation on the lid) (📦 #5542)
2 object(s) - format STL
Download this enclosure with lid in 3D STL format. The dimensions are 165 mm long by 85 mm wide and 70 mm high. The lid only measures 10 mm high. Side thickness is 2 mm. This enclosure features significant cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 165 | mm |
| width | 85 | mm |
| total height | 70 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 120×60×60 mm (with ventilation under the enclosure) (📦 #5577)
2 object(s) - format STL
Enclosure with screwed lid in STL format. The dimensions are 120 mm long by 60 mm wide and 60 mm high. The cover only is 10 mm high. Side thickness is 3 mm. This enclosure features strong cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 60 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 125×75×50 mm (with ventilation on the lid) (📦 #4571)
2 object(s) - format STL
Download this enclosure model with screwed lid in 3D STL format. The dimensions are 125 mm long by 75 mm wide and 50 mm high. The lid only measures 10 mm high. Wall thickness is 3 mm. This enclosure has significant cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 125 | mm |
| width | 75 | mm |
| total height | 50 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 228×101×63 mm (with ventilation on the lid) (📦 #5528)
2 object(s) - format STL
Download this enclosure with lid in STL format. The dimensions are 228 mm long by 101 mm wide and 63 mm high. The lid only measures 10 mm high. Wall thickness is 3 mm. This enclosure has cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 228 | mm |
| width | 101 | mm |
| total height | 63 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 4 | |
| cooling zone(s) | cutouts on t... |