?>

Custom Round air vent STL file ∅ 125 mm, slat angle: 35° 📦#3978

STL Download STL 1
Create a new model:
from scratch search for a model
Model of a round vent cover for ventilation in STL format. Its male diameter is 125 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This vent cover features a prominent flange of 20 mm. The total diameter of this model is 165 mm.
Generation date: 2025-11-28
3D Model Round air vent STL file ∅ 125 mm, slat angle: 35°

3D model download

Free
  • round-air-vent-dia125mm-slD35d_model3978-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : Linear deflection 0.1 Angular deflection 0.1
No compliance warranty No compliance warranty
(attribution - non commercial use - no derivatives)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Round air vent grill template, with the following values:
Parameter Value
#1 male diameter 125 mm (≃4.92 in)
#2 slat angle 35 °
#3 slat thickness 1.6 mm (≃1/16 in)
#4 flange width 20 mm (≃0.79 in)
#5 central reinforcement no
Metadata Value
Total diameter (including flange) 165 mm (≃6 1/2 in)
Total thickness 25 mm (≃0.98 in)
illustration of the parameters
Parameter overview

  • The total thickness of the vent is 25 mm.
  • Whatever the parameters, the slats never overlap. This ensures an optimal airflow. At the same time, the slats form an almost opaque screen along the axis.
  • The slats are actually shaped as parallelograms rather than rectangles. This ensures better printability.
  • The slats and the central reinforcement (if present) feature a 0.40 mm fillet on all edges. This improves airflow and prevents potential whistling.
  • The collar, if present, is 3 mm thick and has a 2 mm fillet for aesthetic purposes.
  • The male insertion area is 3 mm thick and has a 1 mm fillet on both edges to facilitate insertion into the intended slot.
  • The central reinforcement, if present, is 2 mm thick and spans the entire projected width of the slats.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 male diameter dia
#2 slat angle slD
#3 slat thickness slT
#4 flange width flW
#5 central reinforcement renf

Related 3D models

To search for a model based on your own parameters, go to the template page Round air vent grill 

Round air vent STL file ∅ 122 mm, slat angle: 30° (📦 #1794)

1 object(s) - format STL
Round air vent STL file ∅ 122 mm, slat angle: 30°
File of a round air vent for ventilation in STL format. Its insertion diameter measures 122 mm. The slats have a slight angle of 30° and a high thickness of 1.8 mm. This 3D ventilation grille has a prominent flange of 16 mm. The full diameter of this model is 154 mm.
Parameter Value Unit
male diameter 122 mm
slat angle 30 °
slat thickness 1.8 mm
flange width 16 mm
central reinforcement no

Round air vent STL file ∅ 76 mm, slat angle: 45° (📦 #2619)

1 object(s) - format STL
Round air vent STL file ∅ 76 mm, slat angle: 45°
3D model of a round grille for air circulation in STL format. Its insertion diameter is 76 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. This 3D vent grille features a prominent flange of 20 mm. The full diameter of this model is 116 mm.
Parameter Value Unit
male diameter 76 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement no

Round air vent STL file ∅ 100 mm, slat angle: 30° (📦 #3893)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 30°
Design of a round grille for air circulation in STL format. Its male diameter measures 100 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. This vent grille features a prominent flange of 20 mm. The full diameter of the model is 140 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 30 °
slat thickness 2 mm
flange width 20 mm
central reinforcement no

Round air vent STL file ∅ 87 mm, slat angle: 30° (📦 #3804)

1 object(s) - format STL
Round air vent STL file ∅ 87 mm, slat angle: 30°
3D design of a round grille for ventilation in STL format. Its male diameter measures 87 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. This 3D aeration grille features a prominent flange of 20 mm. The full diameter of this model is 127 mm.
Parameter Value Unit
male diameter 87 mm
slat angle 30 °
slat thickness 2 mm
flange width 20 mm
central reinforcement no

Round air vent STL 3D file ∅ 78 mm, slat angle: 30° (📦 #3597)

1 object(s) - format STL
Round air vent STL 3D file ∅ 78 mm, slat angle: 30°
3D design of a round air vent for ventilation in STL format. Its insertion diameter measures 78 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. This 3D vent cover features a prominent flange of 20 mm. The overall diameter of this model is 118 mm.
Parameter Value Unit
male diameter 78 mm
slat angle 30 °
slat thickness 2 mm
flange width 20 mm
central reinforcement no

Round air vent STL 3D file ∅ 122 mm, slat angle: 40° (📦 #1790)

1 object(s) - format STL
Round air vent STL 3D file ∅ 122 mm, slat angle: 40°
3D model of a round vent cover for air circulation in STL format. Its insertion diameter is 122 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This aeration grille features a collar of 10 mm. The total diameter of this model is 142 mm.
Parameter Value Unit
male diameter 122 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement no

Round air vent STL file ∅ 99 mm, slat angle: 20° (📦 #3056)

1 object(s) - format STL
Round air vent STL file ∅ 99 mm, slat angle: 20°
Model of a round grille for air circulation in STL format. Its insertion diameter is 99 mm. The slats have a slight angle of 20° and a high thickness of 2 mm. This ventilation grille has a prominent flange of 16 mm. The total diameter of the model is 131 mm.
Parameter Value Unit
male diameter 99 mm
slat angle 20 °
slat thickness 2 mm
flange width 16 mm
central reinforcement no

Round air vent STL 3D file ∅ 100 mm, slat angle: 40° (📦 #1473)

1 object(s) - format STL (4.0/5) 1 vote(s)
Round air vent STL 3D file ∅ 100 mm, slat angle: 40°
3D file of a round grille for air circulation in STL format. Its male diameter measures 100 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This vent grille has a flange of 10 mm. The full diameter of this model is 120 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement no

Round air vent STL file ∅ 75 mm, slat angle: 45° (📦 #2617)

1 object(s) - format STL
Round air vent STL file ∅ 75 mm, slat angle: 45°
Design of a round air vent for air circulation in STL format. Its male diameter is 75 mm. The slats have an angle of 45° and a high thickness of 2 mm. This vent cover features a prominent flange of 15 mm. The total diameter of the model is 105 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 45 °
slat thickness 2 mm
flange width 15 mm
central reinforcement no

Round air vent STL 3D file ∅ 160 mm, slat angle: 45° (📦 #3103)

1 object(s) - format STL
Round air vent STL 3D file ∅ 160 mm, slat angle: 45°
Design of a round vent cover for ventilation in STL format. Its insertion diameter is 160 mm. The slats have an angle of 45° and a high thickness of 2.2 mm. This 3D vent cover features a prominent flange of 20 mm. The overall diameter of this model is 200 mm.
Parameter Value Unit
male diameter 160 mm
slat angle 45 °
slat thickness 2.2 mm
flange width 20 mm
central reinforcement no

Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #2925)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement
3D file of a round air vent for air circulation in STL format. Its male diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A central reinforcement secures the whole structure. This aeration grille has a prominent flange of 20 mm. The total diameter of this model is 190 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 40 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 115 mm, slat angle: 45° (📦 #2390)

1 object(s) - format STL
Round air vent STL 3D file ∅ 115 mm, slat angle: 45°
3D file of a round grille for air circulation in STL format. Its male diameter is 115 mm. The slats have an angle of 45° and a high thickness of 2 mm. This ventilation grille has a collar of 10 mm. The full diameter of this model is 135 mm.
Parameter Value Unit
male diameter 115 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement no

Round air vent STL file ∅ 100 mm, slat angle: 10° (📦 #3686)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 10°
Design of a round vent cover for ventilation in STL format. Its insertion diameter measures 100 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. This 3D vent grille features a prominent flange of 20 mm. The full diameter of this model is 140 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 10 °
slat thickness 2 mm
flange width 20 mm
central reinforcement no

Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #1773)

1 object(s) - format STL
Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter is 125 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A central reinforcement reinforces the slats. This 3D vent grille has a prominent flange of 20 mm. The overall diameter of this model is 165 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 127 mm, slat angle: 45° with central reinforcement (📦 #1415)

1 object(s) - format STL
Round air vent STL file ∅ 127 mm, slat angle: 45° with central reinforcement
Model of a round air vent for ventilation in STL format. Its male diameter is 127 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A centered vertical reinforcement strengthens the slats. This ventilation grille has a prominent flange of 20 mm. The overall diameter of the model is 167 mm.
Parameter Value Unit
male diameter 127 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 105 mm, slat angle: 45° with central reinforcement (📦 #1491)

1 object(s) - format STL
Round air vent STL file ∅ 105 mm, slat angle: 45° with central reinforcement
3D design of a round grille for air circulation in STL format. Its male diameter measures 105 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A vertical reinforcement secures the slats. This vent grille has a prominent flange of 20 mm. The overall diameter of this model is 145 mm.
Parameter Value Unit
male diameter 105 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 155 mm, slat angle: 45° with central reinforcement (📦 #1416)

1 object(s) - format STL
Round air vent STL file ∅ 155 mm, slat angle: 45° with central reinforcement
Model of a round vent cover for ventilation in STL format. Its male diameter measures 155 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement secures the slats. This 3D ventilation grille has a prominent flange of 20 mm. The full diameter of this model is 195 mm.
Parameter Value Unit
male diameter 155 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 158 mm, slat angle: 33° with central reinforcement (📦 #2554)

1 object(s) - format STL
Round air vent STL 3D file ∅ 158 mm, slat angle: 33° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its male diameter measures 158 mm. The slats have an angle of 33° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the whole structure. This 3D vent cover has a prominent flange of 15 mm. The full diameter of the model is 188 mm.
Parameter Value Unit
male diameter 158 mm
slat angle 33 °
slat thickness 1.6 mm
flange width 15 mm
central reinforcement yes

Round air vent STL 3D file ∅ 80 mm, slat angle: 45° (📦 #2386)

1 object(s) - format STL
Round air vent STL 3D file ∅ 80 mm, slat angle: 45°
Model of a round grille for air circulation in STL format. Its insertion diameter measures 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. This vent cover has a flange of 10 mm. The full diameter of this model is 100 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement no

Round air vent STL 3D file ∅ 96 mm, slat angle: 20° (📦 #3925)

1 object(s) - format STL
Round air vent STL 3D file ∅ 96 mm, slat angle: 20°
File of a round air vent for ventilation in STL format. Its insertion diameter measures 96 mm. The slats have a slight angle of 20° and a high thickness of 2 mm. This ventilation grille features a collar of 10 mm. The total diameter of the model is 116 mm.
Parameter Value Unit
male diameter 96 mm
slat angle 20 °
slat thickness 2 mm
flange width 10 mm
central reinforcement no

Round air vent STL 3D file ∅ 93 mm, slat angle: 50° with central reinforcement (📦 #3641)

1 object(s) - format STL
Round air vent STL 3D file ∅ 93 mm, slat angle: 50° with central reinforcement
Model of a round grille for ventilation in STL format. Its male diameter is 93 mm. The slats have a steep angle of 50° and a low thickness of 1.6 mm. A central reinforcement reinforces the whole structure. This 3D aeration grille features a prominent flange of 20 mm. The overall diameter of this model is 133 mm.
Parameter Value Unit
male diameter 93 mm
slat angle 50 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 88 mm, slat angle: 45° with central reinforcement (📦 #1829)

1 object(s) - format STL
Round air vent STL file ∅ 88 mm, slat angle: 45° with central reinforcement
Design of a round vent cover for ventilation in STL format. Its male diameter measures 88 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement secures the slats. This vent cover features a prominent flange of 15 mm. The full diameter of this model is 118 mm.
Parameter Value Unit
male diameter 88 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 15 mm
central reinforcement yes

Round air vent STL 3D file ∅ 96 mm, slat angle: 10° (📦 #1268)

1 object(s) - format STL
Round air vent STL 3D file ∅ 96 mm, slat angle: 10°
3D design of a round air vent for air circulation in STL format. Its insertion diameter measures 96 mm. The slats have a slight angle of 10° and a low thickness of 1.6 mm. This ventilation grille has a collar of 10 mm. The total diameter of this model is 116 mm.
Parameter Value Unit
male diameter 96 mm
slat angle 10 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement no

Round air vent STL 3D file ∅ 127.0 mm, slat angle: 30° with central reinforcement (📦 #3734)

1 object(s) - format STL
Round air vent STL 3D file ∅ 127.0 mm, slat angle: 30° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 127.0 mm. The slats have a slight angle of 30° and a high thickness of 2.0 mm. A vertical reinforcement strengthens the slats. This aeration grille has a prominent flange of 20 mm. The overall diameter of this model is 167 mm.
Parameter Value Unit
male diameter 127.0 mm
slat angle 30 °
slat thickness 2.0 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 55 mm, slat angle: 30° with central reinforcement (📦 #1429)

1 object(s) - format STL
Round air vent STL file ∅ 55 mm, slat angle: 30° with central reinforcement
3D model of a round air vent for ventilation in STL format. Its insertion diameter measures 55 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A centered vertical reinforcement strengthens the slats. This vent grille features a prominent flange of 20 mm. The overall diameter of the model is 95 mm.
Parameter Value Unit
male diameter 55 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 125 mm, slat angle: 30° (📦 #2764)

1 object(s) - format STL
Round air vent STL 3D file ∅ 125 mm, slat angle: 30°
3D file of a round air vent for ventilation in STL format. Its male diameter is 125 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This 3D vent cover features a thin flange of 5 mm. The overall diameter of this model is 135 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL file ∅ 120 mm, slat angle: 30° (📦 #1329)

1 object(s) - format STL (4.5/5) 2 vote(s)
Round air vent STL file ∅ 120 mm, slat angle: 30°
3D file of a round air vent for ventilation in STL format. Its male diameter is 120 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This vent grille has a thin flange of 5 mm. The total diameter of this model is 130 mm.
Parameter Value Unit
male diameter 120 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL 3D file ∅ 119.5 mm, slat angle: 30° (📦 #1903)

1 object(s) - format STL
Round air vent STL 3D file ∅ 119.5 mm, slat angle: 30°
File of a round grille for ventilation in STL format. Its male diameter measures 119.5 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This aeration grille has a thin flange of 5 mm. The overall diameter of this model is 129.5 mm.
Parameter Value Unit
male diameter 119.5 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement (📦 #1989)

1 object(s) - format STL
Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement
Model of a round air vent for air circulation in STL format. Its insertion diameter measures 125.2 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the slats. This vent cover has a prominent flange of 20 mm. The full diameter of the model is 165.2 mm.
Parameter Value Unit
male diameter 125.2 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes