Custom O-ring STL file ID 1 × CS 0.1 mm 📦#3498
Generation date: 2025-11-21
3D model download
Free- o-ring-ID1mm-CS0.1mm_model3498_model3498-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 1 mm (≃0.04 in) |
| #2 | cross section (CS) | 0.1 mm (<0.01 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 1.2 mm (≃1/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O'ring STL 3D file ID 4.6 × CS 0.8 mm (📦 #1753)
1 object(s) - format STL
3D model in STL format of O-ring with dimensions Inner diameter (ID) 4.6 mm by CS 0.8 mm. Final diameter resulting is 6.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 4.6 | mm |
| cross section (CS) | 0.8 | mm |
O-ring STL file ID 1.8 × CS 1 mm (📦 #8252)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with Inner diameter 1.8 mm by CS 1 mm. Outer diameter (OD) resulting is therefore 3.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 1.8 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 2 × CS 1 mm (📦 #2369)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 2 mm / CS 1 mm. External diameter (OD) resulting corresponds to 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 2 | mm |
| cross section (CS) | 1 | mm |
O'ring STL 3D file ID 3 × CS 1 mm (📦 #1042)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 3 mm / CS 1 mm. Outer diameter (OD, for outer diameter) is 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 3 | mm |
| cross section (CS) | 1 | mm |
O'ring STL file ID 4 × CS 1 mm (📦 #2370)
1 object(s) - format STL
3D model of O-ring with dimensions Inner diameter 4 mm by CS (cross section) 1 mm. Outer diameter (OD, for outer diameter) resulting is therefore 6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 4 | mm |
| cross section (CS) | 1 | mm |
O'ring STL 3D file ID 0.74 × CS 1.02 mm (📦 #1032)
1 object(s) - format STL
3D model in STL format of O-ring with ID (inner diameter) 0.74 mm × section thickness 1.02 mm. External diameter (OD) corresponds to 2.78 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 0.74 | mm |
| cross section (CS) | 1.02 | mm |
O-ring STL 3D file ID 5 × CS 1 mm (📦 #1044)
1 object(s) - format STL
3D file of sealing ring with Inner diameter (ID) 5 mm / CS (cross section) 1 mm. Final diameter resulting is 7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 5 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 12 × CS 1 mm (📦 #1576)
1 object(s) - format STL
3D file of O-ring with Internal diameter (ID) 12 mm × section thickness 1 mm. Final diameter resulting is therefore 14 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 13 × CS 1 mm (📦 #2106)
1 object(s) - format STL
STL model of rubber ring with ID 13 mm / thickness 1 mm. Final diameter resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 15.5 × CS 1 mm (📦 #7322)
1 object(s) - format STL
3D model of rubber ring with Internal diameter (ID) 15.5 mm × CS (cross section) 1 mm. Outer diameter (OD, for outer diameter) resulting is therefore 17.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.5 | mm |
| cross section (CS) | 1 | mm |
O'ring STL file ID 23.1 × CS 0.6 mm (📦 #7466)
1 object(s) - format STL
3D model of O-ring with Internal diameter (ID) 23.1 mm by thickness 0.6 mm. External diameter (OD) is therefore 24.3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 23.1 | mm |
| cross section (CS) | 0.6 | mm |
O'ring STL file ID 24.4 × CS 0.5 mm (📦 #7450)
1 object(s) - format STL
3D model of O-ring with dimensions ID 24.4 mm / CS 0.5 mm. Outer diameter (OD) corresponds to 25.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24.4 | mm |
| cross section (CS) | 0.5 | mm |
O-ring STL file ID 26 × CS 0.2 mm (📦 #2854)
1 object(s) - format STL
File of O-ring with dimensions Inner diameter 26 mm by section thickness 0.2 mm. External diameter (OD) resulting is 26.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 0.2 | mm |
O-ring STL file ID 1 × CS 1.5 mm (📦 #4232)
1 object(s) - format STL
STL model of rubber ring with dimensions Inner diameter 1 mm / CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) is therefore 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 1 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 3 × CS 1.5 mm (📦 #1041)
1 object(s) - format STL
Model of rubber ring with Internal diameter (ID) 3 mm / section thickness 1.5 mm. The outer diameter resulting corresponds to 6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 3 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL 3D file ID 3.5 × CS 1.5 mm (📦 #3790)
1 object(s) - format STL
3D file of rubber ring with Internal diameter (ID) 3.5 mm by CS (cross section) 1.5 mm. External diameter (OD) corresponds to 6.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 3.5 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 3.6 × CS 1.5 mm (📦 #3791)
1 object(s) - format STL
STL file of sealing ring with Internal diameter (ID) 3.6 mm by CS (cross section) 1.5 mm. Final diameter resulting corresponds to 6.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 3.6 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 7 × CS 1.5 mm (📦 #1039)
1 object(s) - format STL
3D file in STL format of O-ring with dimensions Internal diameter 7 mm / CS 1.5 mm. External diameter (OD) is therefore 10 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 7 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 14.2 × CS 1.4 mm (📦 #8146)
1 object(s) - format STL
STL file of sealing ring with dimensions ID 14.2 mm × CS (cross section) 1.4 mm. External diameter (OD) resulting corresponds to 17 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14.2 | mm |
| cross section (CS) | 1.4 | mm |
O'ring STL file ID 9 × CS 1.5 mm (📦 #4354)
1 object(s) - format STL
3D file in STL format of sealing ring with Internal diameter (ID) 9 mm by thickness 1.5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 12 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 9 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL 3D file ID 10 × CS 1.5 mm (📦 #3801)
1 object(s) - format STL
3D file in STL format of O-ring with ID (inner diameter) 10 mm by CS (cross section) 1.5 mm. The outer diameter corresponds to 13 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL file ID 12 × CS 1.5 mm (📦 #1036)
1 object(s) - format STL
File of rubber ring with Inner diameter 12 mm × CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 26 × CS 1 mm (📦 #4597)
1 object(s) - format STL
3D model of circular seal with ID 26 mm / CS (cross section) 1 mm. External diameter (OD) resulting corresponds to 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 5.1 × CS 1.6 mm (📦 #1565)
1 object(s) - format STL (5.0/5) 1 vote(s)
STL file of O-ring (torus-shaped seal) with Internal diameter 5.1 mm × thickness 1.6 mm. Outer diameter (OD) resulting is therefore 8.3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 5.1 | mm |
| cross section (CS) | 1.6 | mm |
O-ring STL 3D file ID 13 × CS 1.5 mm (📦 #4076)
1 object(s) - format STL
STL file of circular seal with Inner diameter (ID) 13 mm / thickness 1.5 mm. Outer diameter (OD) is therefore 16 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL 3D file ID 6.7 × CS 1.6 mm (📦 #3499)
1 object(s) - format STL
3D file of sealing ring with dimensions Inner diameter 6.7 mm / CS 1.6 mm. Final diameter is 9.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 6.7 | mm |
| cross section (CS) | 1.6 | mm |
O-ring STL 3D file ID 15 × CS 1.5 mm (📦 #1561)
1 object(s) - format STL
STL model of sealing ring with Inner diameter 15 mm / thickness 1.5 mm. The outer diameter resulting is therefore 18 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 15.8 × CS 1.5 mm (📦 #2883)
1 object(s) - format STL
Model of circular seal with ID 15.8 mm × CS (cross section) 1.5 mm. The outer diameter resulting is 18.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.8 | mm |
| cross section (CS) | 1.5 | mm |