?>

Custom Tube adapter STL file ⌀ 102–80 mm (Length: 25 mm) 📦#3486

STL Download STL
Create a new model:
from scratch search for a model
Tube junction ⌀102 mm to ⌀80 mm in STL 3D format. Total length of this fitting is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 10 mm. The two axes of the tubes are off-center by 9.9 mm. The ends are not rounded.
Generation date: 2025-11-20
3D Model Tube adapter STL file ⌀ 102–80 mm (Length: 25 mm)

3D model download

Free
  • inline-tube-adapter-lenA5mm-di_model3486-nb0_dd{id}.stl : 11.8 Mo
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 5 mm (≃3/16 in)
#2 side A outer diameter 102 mm (≃4.02 in)
#3 side A thickness 2 mm (≃0.08 in)
#4 side B length 10 mm (≃0.39 in)
#5 side B outer diameter 80 mm (≃3.15 in)
#6 side B thickness 2 mm (≃0.08 in)
#7 transition length 10 mm (≃0.39 in)
#8 axis offset 9.9 mm (≃3/8 in)
#9 ends fillet no fillet
Metadata Value
inner diameter (side A) 98 mm (≃3.86 in)
inner diameter (side B) 76 mm (≃3 in)
total length 25 mm (≃0.98 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL 3D file ⌀ 104–80 mm (Length: 25 mm) (📦 #3487)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 104–80 mm (Length: 25 mm)
Straight sleeve ⌀104 mm to ⌀80 mm in STL format. Final length of this junction is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 10 mm. The axes of the tubes are off-center by 9.9 mm. The ends are raw.
Parameter Value Unit
side A length 5 mm
side A outer diameter 104 mm
side A thickness 2 mm
side B length 10 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 10 mm
axis offset 9.9 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 102–82 mm (Length: 25 mm) (📦 #3479)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 102–82 mm (Length: 25 mm)
Straight tubing adapter ⌀102 mm to ⌀82 mm in STL format. Total length of this fitting is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 10 mm. The two axes of the tubes are offset by 9.9 mm. The ends have no fillet.
Parameter Value Unit
side A length 5 mm
side A outer diameter 102 mm
side A thickness 2 mm
side B length 10 mm
side B outer diameter 82 mm
side B thickness 2 mm
transition length 10 mm
axis offset 9.9 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 94–80 mm (Length: 50 mm) (📦 #1929)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 94–80 mm (Length: 50 mm)
Tube reducer ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 5.9 mm. The ends feature an external fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 94 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 10 mm
axis offset 5.9 mm
ends fillet fillet on th...

Tubing adapter STL file ⌀ 90–85 mm (Length: 39 mm) (📦 #3259)

1 object(s) - format STL
Tubing adapter STL file ⌀ 90–85 mm (Length: 39 mm)
Tubing adapter ⌀90 mm to ⌀85 mm in STL 3D format. Final length of this junction is 39 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 18 mm, the smaller one of 16 mm. The ends are not rounded.
Parameter Value Unit
side A length 18 mm
side A outer diameter 90 mm
side A thickness 2 mm
side B length 16 mm
side B outer diameter 85 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 104–60 mm (Length: 40 mm) (📦 #2607)

1 object(s) - format STL
Tube adapter STL file ⌀ 104–60 mm (Length: 40 mm)
Tube fitting ⌀104 mm to ⌀60 mm in STL 3D format. Total length of this reducer is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are raw.
Parameter Value Unit
side A length 15 mm
side A outer diameter 104 mm
side A thickness 2 mm
side B length 15 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 90–80 mm (Length: 48 mm) (📦 #3260)

1 object(s) - format STL
Tube adapter STL file ⌀ 90–80 mm (Length: 48 mm)
Straight tube adapter ⌀90 mm to ⌀80 mm in STL 3D format. Final length of this coupler is 48 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 18 mm, the smaller one of 25 mm. The ends have no fillet.
Parameter Value Unit
side A length 18 mm
side A outer diameter 90 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 90–82 mm (Length: 48 mm) (📦 #3261)

1 object(s) - format STL
Tube adapter STL file ⌀ 90–82 mm (Length: 48 mm)
Inline tube reducer ⌀90 mm to ⌀82 mm in STL 3D format. Length of this sleeve is 48 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 18 mm, the smaller one of 25 mm. The ends have no fillet.
Parameter Value Unit
side A length 18 mm
side A outer diameter 90 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 82 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 99–96 mm (Length: 60 mm) (📦 #2557)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 99–96 mm (Length: 60 mm)
Inline fitting ⌀99 mm to ⌀96 mm in STL 3D format. Total length of this reducer is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 99 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 96 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 94–60 mm (Length: 80 mm) (📦 #1685)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 94–60 mm (Length: 80 mm)
Straight sleeve ⌀94 mm to ⌀60 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 15 mm. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 94 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 15 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm) (📦 #1882)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm)
Tube connector ⌀80 mm to ⌀60 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 125–100 mm (Length: 70 mm) (📦 #1883)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 125–100 mm (Length: 70 mm)
Inline tube junction ⌀125 mm to ⌀100 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 1 mm. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 125 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 100 mm
side B thickness 2 mm
transition length 25 mm
axis offset 1 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm)
Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.
Parameter Value Unit
side A length 15 mm
side A outer diameter 90 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 68 mm
side B thickness 2 mm
transition length 45 mm
axis offset 10 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 130–100 mm (Length: 70 mm) (📦 #1996)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 130–100 mm (Length: 70 mm)
Tube connector ⌀130 mm to ⌀100 mm in STL format. Final length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are offset by 1 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 130 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 100 mm
side B thickness 2 mm
transition length 25 mm
axis offset 1 mm
ends fillet no fillet

Tube adapter STL file ⌀ 64–60 mm (Length: 50 mm) (📦 #3467)

1 object(s) - format STL
Tube adapter STL file ⌀ 64–60 mm (Length: 50 mm)
Tube adapter ⌀64 mm to ⌀60 mm in STL format. Length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 64 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm) (📦 #1990)

1 object(s) - format STL
Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm)
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 86 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 66 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 100–60 mm (Length: 70 mm) (📦 #1115)

1 object(s) - format STL (4.9/5) 8 vote(s)
Tube adapter STL file ⌀ 100–60 mm (Length: 70 mm)
Straight tube adapter ⌀100 mm to ⌀60 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 10 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 15 mm
ends fillet fillet on th...

Tubing adapter STL 3D file ⌀ 124–119 mm (Length: 40 mm) (📦 #2594)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 124–119 mm (Length: 40 mm)
Inline tube coupler ⌀124 mm to ⌀119 mm in STL format. Total length of this adapter is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 124 mm
side A thickness 2 mm
side B length 10 mm
side B outer diameter 119 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 107–80 mm (Length: 70 mm) (📦 #2919)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 107–80 mm (Length: 70 mm)
Tubing reducer ⌀107 mm to ⌀80 mm in STL format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 107 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)

1 object(s) - format STL
Tube adapter STL file ⌀ 85–70 mm (Length: 80 mm)
Straight tube fitting ⌀85 mm to ⌀70 mm in STL 3D format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 7.4 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 85 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 70 mm
side B thickness 3 mm
transition length 20 mm
axis offset 7.4 mm
ends fillet no fillet

Tube adapter STL file ⌀ 110–100 mm (Length: 35 mm) (📦 #1801)

1 object(s) - format STL
Tube adapter STL file ⌀ 110–100 mm (Length: 35 mm)
Tube coupler ⌀110 mm to ⌀100 mm in STL format. Final length of this adapter is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 10 mm. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 110 mm
side A thickness 3 mm
side B length 10 mm
side B outer diameter 100 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 70–69 mm (Length: 50 mm) (📦 #1394)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 70–69 mm (Length: 50 mm)
Diameter adapter ⌀70 mm to ⌀69 mm in STL 3D format. Length of this sleeve is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 20 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 69 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 128–98 mm (Length: 71 mm) (📦 #1846)

1 object(s) - format STL
Tube adapter STL file ⌀ 128–98 mm (Length: 71 mm)
Inline tube coupler ⌀128 mm to ⌀98 mm in STL format. Final length of this adapter is 71 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 21 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 128 mm
side A thickness 2 mm
side B length 21 mm
side B outer diameter 98 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 110–106 mm (Length: 35 mm) (📦 #1239)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 110–106 mm (Length: 35 mm)
Tube adapter ⌀110 mm to ⌀106 mm in STL format. Final length of this junction is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 110 mm
side A thickness 3 mm
side B length 10 mm
side B outer diameter 106 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 85–60 mm (Length: 45 mm) (📦 #1165)

1 object(s) - format STL
Tube adapter STL file ⌀ 85–60 mm (Length: 45 mm)
Tube coupler ⌀85 mm to ⌀60 mm in STL format. Final length of this connector is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 85 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)

1 object(s) - format STL (4.5/5) 2 vote(s)
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm)
Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 70 mm
side B thickness 3 mm
transition length 20 mm
axis offset 4.9 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 107–53 mm (Length: 65 mm) (📦 #2647)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 107–53 mm (Length: 65 mm)
Diameter adapter ⌀107 mm to ⌀53 mm in STL format. Total length of this reducer is 65 mm. The larger-diameter tube has a thickness of 3.1 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to ease the connection.
Parameter Value Unit
side A length 15 mm
side A outer diameter 107 mm
side A thickness 3.1 mm
side B length 30 mm
side B outer diameter 53 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 15 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm)
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 94–80 mm (Length: 80 mm) (📦 #1928)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 94–80 mm (Length: 80 mm)
Inline sleeve ⌀94 mm to ⌀80 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The axes of the tubes are off-center by 5.9 mm. The ends are rounded on the outside.
Parameter Value Unit
side A length 20 mm
side A outer diameter 94 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 10 mm
axis offset 5.9 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 102–90 mm (Length: 80 mm) (📦 #1382)

1 object(s) - format STL (4.0/5) 1 vote(s)
Tube adapter STL file ⌀ 102–90 mm (Length: 80 mm)
Straight sleeve ⌀102 mm to ⌀90 mm in STL 3D format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The two axes of the tubes are offset by 5.9 mm. The ends feature an external fillet to ease the connection.
Parameter Value Unit
side A length 20 mm
side A outer diameter 102 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 90 mm
side B thickness 2 mm
transition length 10 mm
axis offset 5.9 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 92–71 mm (Length: 90 mm) (📦 #1371)

1 object(s) - format STL
Tube adapter STL file ⌀ 92–71 mm (Length: 90 mm)
Inline sleeve ⌀92 mm to ⌀71 mm in STL 3D format. Total length of this adapter is 90 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 10 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 50 mm. The axes of the tubes are offset by 9.1 mm. The ends are raw.
Parameter Value Unit
side A length 10 mm
side A outer diameter 92 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 71 mm
side B thickness 2 mm
transition length 30 mm
axis offset 9.1 mm
ends fillet no fillet