Custom Tube support clip Ø300 mm STL file · Pan head screw Ø3 mm 📦#3327
Generation date: 2025-11-16
3D model download
Free- pipe-clip-holder-dia300mm-hod3_model3327-nb0_dd{id}.stl : 135.5 Ko
STL
Mesh quality :
0.001
0.1
No compliance warranty
License: ITE IPU v1.0 - Iteration3d
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download
Values for this model
This model was generated by the Pipe clip holder template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | tube diameter | 300 mm (≃11 13/16 in) |
| #2 | hole diameter | 3 mm (≃1/8 in) |
| #3 | countersunk screw | no |
| Metadata | Value |
|---|---|
| width | 40 mm (≃1 9/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 tube diameter | dia |
| #2 hole diameter | hod |
| #3 countersunk screw | scrT |
Related 3D models
To search for a model based on your own parameters, go to the template page Pipe clip holder
Clip-on pipe holder Ø300 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3692)
1 object(s) - format STL
Download this 3D file of a Ø300 mm snap-on pipe mount in STL format. The installation is achieved using a flat head screw Ø4 mm. This clip-on pipe support is intended for a secure hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 300 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on tube support Ø248 mm STL file · Countersunk screw Ø4 mm (📦 #4025)
1 object(s) - format STL
Download this 3D model of a Ø248 mm clip-on pipe support in STL format. The fastening is performed using a countersunk screw Ø4 mm. This clip-on pipe holder is intended for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 248 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Pipe support clip Ø210 mm STL 3D file · Flat head screw Ø4 mm (📦 #9595)
1 object(s) - format STL
Download this 3D model of a Ø210 mm snap-on pipe clip in STL format. The installation is done by means of a countersunk screw Ø4 mm. This clip-on pipe mount is intended for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 210 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on tube support Ø200 mm STL 3D file · Countersunk screw Ø5 mm (📦 #3616)
1 object(s) - format STL
Download this 3D file of a Ø200 mm custom pipe clip in STL format. The installation is performed by means of a countersunk screw Ø5 mm. This snap-on pipe mount is designed for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 200 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø185 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6255)
1 object(s) - format STL
3D model of a Ø185 mm snap-on pipe mount in STL format. The mounting is done using a flat head screw Ø5 mm. This clip-on pipe mount is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 185 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø110 mm STL file · Pan head screw Ø4 mm (📦 #3351)
1 object(s) - format STL
Download this 3D file of a Ø110 mm clip-on pipe support in STL format. The mounting is done by means of a round head screw Ø4 mm. This clip-on pipe holder is designed for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 110 | mm |
| hole diameter | 4 | mm |
| countersunk screw | no |
Tube support clip Ø200 mm STL file · Round head screw Ø8 mm (📦 #3205)
1 object(s) - format STL
3D model of a Ø200 mm snap-on pipe clip in STL format. The mounting is done with a heavy-duty round head screw Ø8 mm. This pipe clip holder is built for a secure hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 200 | mm |
| hole diameter | 8 | mm |
| countersunk screw | no |
Pipe support clip Ø200 mm STL 3D file · Flat head screw Ø6 mm (📦 #4122)
1 object(s) - format STL
3D model of a Ø200 mm pipe clip holder in STL format. The installation is performed with a sturdy flat head screw Ø6 mm. This snap-on pipe clip is designed for a secure hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 200 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Pipe support clip Ø157 mm STL file · Flat head screw Ø5 mm (📦 #3795)
1 object(s) - format STL
3D model of a Ø157 mm pipe support clip in STL format. The fastening is achieved with a countersunk screw Ø5 mm. This snap-on pipe clip is intended for a secure hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 157 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe clip holder Ø101 mm STL file · Pan head screw Ø5 mm (📦 #4501)
1 object(s) - format STL
Download this 3D model of a Ø101 mm clip-on pipe holder in STL format. The mounting is achieved by means of a round head screw Ø5 mm. This custom pipe holder is intended for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 101 | mm |
| hole diameter | 5 | mm |
| countersunk screw | no |
Pipe clip holder Ø150 mm STL file · Countersunk screw Ø5 mm (📦 #4129)
1 object(s) - format STL
Download this 3D model of a Ø150 mm clip-on pipe support in STL format. The mounting is done with a flat head screw Ø5 mm. This clip-on pipe holder is designed for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 150 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø80 mm STL 3D file · Pan head screw Ø3 mm (📦 #7248)
1 object(s) - format STL
Download this 3D model of a Ø80 mm pipe clip mount in STL format. The mounting is performed by means of a round head screw Ø3 mm. This pipe clip holder is designed for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 80 | mm |
| hole diameter | 3 | mm |
| countersunk screw | no |
Pipe clip Ø125 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3352)
1 object(s) - format STL
Download this 3D model of a Ø125 mm custom pipe holder in STL format. The fastening is achieved by means of a countersunk screw Ø4 mm. This clip-on pipe mount is designed for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 125 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube clip Ø74 mm STL file · Round head screw Ø3 mm (📦 #8497)
1 object(s) - format STL
3D model of a Ø74 mm clip-on pipe support in STL format. The mounting is performed by means of a pan head screw Ø3 mm. This clip-on pipe mount is built for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 74 | mm |
| hole diameter | 3 | mm |
| countersunk screw | no |
Clip-on tube holder Ø73 mm STL 3D file · Round head screw Ø3 mm (📦 #6262)
1 object(s) - format STL
Download this 3D model of a Ø73 mm pipe support clip in STL format. The installation is achieved with a round head screw Ø3 mm. This snap-on pipe clip is designed for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 73 | mm |
| hole diameter | 3 | mm |
| countersunk screw | no |
Tube support clip Ø120 mm STL file · Flat head screw Ø4 mm (📦 #4252)
1 object(s) - format STL
3D model of a Ø120 mm clip-on pipe mount in STL format. The fastening is performed with a flat head screw Ø4 mm. This clip-on pipe holder is built for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 120 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø117 mm STL file · Countersunk screw Ø4 mm (📦 #6949)
1 object(s) - format STL
Download this 3D file of a Ø117 mm pipe clip in STL format. The installation is done using a countersunk screw Ø4 mm. This snap-on pipe clip is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 117 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube clip holder Ø77 mm STL 3D file · Pan head screw Ø5 mm (📦 #6042)
1 object(s) - format STL
Download this 3D file of a Ø77 mm pipe clip holder in STL format. The fastening is designed by means of a pan head screw Ø5 mm. This clip-on pipe holder is intended for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 77 | mm |
| hole diameter | 5 | mm |
| countersunk screw | no |
Clip-on tube support Ø66 mm STL file · Pan head screw Ø3 mm (📦 #8725)
1 object(s) - format STL
3D model of a Ø66 mm snap-on pipe mount in STL format. The mounting is designed by means of a pan head screw Ø3 mm. This clip-on pipe support is designed for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 66 | mm |
| hole diameter | 3 | mm |
| countersunk screw | no |
Tube clip Ø107 mm STL 3D file · Countersunk screw Ø3 mm (📦 #7419)
1 object(s) - format STL
Download this 3D file of a Ø107 mm snap-on pipe clip in STL format. The installation is designed with a flat head screw Ø3 mm. This custom pipe holder is intended for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 107 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Clip-on tube support Ø118 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6943)
1 object(s) - format STL
Download this 3D model of a Ø118 mm snap-on tube holder in STL format. The mounting is designed with a flat head screw Ø5 mm. This clip-on pipe support is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 118 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø200 mm STL 3D file · Countersunk screw Ø8 mm (📦 #4620)
1 object(s) - format STL
Download this 3D file of a Ø200 mm clip-on tube holder in STL format. The mounting is designed by means of a sturdy flat head screw Ø8 mm. This snap-on pipe mount is built for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 200 | mm |
| hole diameter | 8 | mm |
| countersunk screw | yes |
Tube clip Ø106 mm STL file · Flat head screw Ø3 mm (📦 #5316)
1 object(s) - format STL
3D model of a Ø106 mm custom pipe clip in STL format. The mounting is performed with a countersunk screw Ø3 mm. This custom pipe holder is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 106 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Tube support clip Ø130 mm STL file · Round head screw Ø8 mm (📦 #3189)
1 object(s) - format STL
3D model of a Ø130 mm clip-on pipe mount in STL format. The mounting is performed by means of a sturdy round head screw Ø8 mm. This pipe clip mount is built for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 130 | mm |
| hole diameter | 8 | mm |
| countersunk screw | no |
Pipe clip Ø103 mm STL 3D file · Flat head screw Ø3 mm (📦 #7252)
1 object(s) - format STL
3D model of a Ø103 mm pipe clip holder in STL format. The installation is designed with a countersunk screw Ø3 mm. This pipe support clip is intended for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 103 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Pipe clip Ø127 mm STL file · Countersunk screw Ø6 mm (📦 #5584)
1 object(s) - format STL
Download this 3D model of a Ø127 mm pipe support clip in STL format. The installation is performed with a heavy-duty countersunk screw Ø6 mm. This clip-on pipe mount is designed for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 127 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |