Custom Clip-on pipe support Ø117 mm STL file · Countersunk screw Ø4 mm 📦#6949
Generation date: 2026-01-30
3D model download
Free- pipe-clip-holder-dia117mm-hod4_model6949-nb0_dd{id}.stl : 164.9 Ko
STL
Mesh quality :
0.001
0.1
No compliance warranty
License: ITE IPU v1.0 - Iteration3d
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download
Values for this model
This model was generated by the Pipe clip holder template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | tube diameter | 117 mm (≃4.61 in) |
| #2 | hole diameter | 4 mm (≃0.16 in) |
| #3 | countersunk screw | yes |
| Metadata | Value |
|---|---|
| width | 21.1 mm (≃0.83 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 tube diameter | dia |
| #2 hole diameter | hod |
| #3 countersunk screw | scrT |
Related 3D models
To search for a model based on your own parameters, go to the template page Pipe clip holder
Tube support clip Ø120 mm STL file · Flat head screw Ø4 mm (📦 #4252)
1 object(s) - format STL
3D model of a Ø120 mm clip-on pipe mount in STL format. The fastening is performed with a flat head screw Ø4 mm. This clip-on pipe holder is built for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 120 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Pipe clip Ø125 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3352)
1 object(s) - format STL
Download this 3D model of a Ø125 mm custom pipe holder in STL format. The fastening is achieved by means of a countersunk screw Ø4 mm. This clip-on pipe mount is designed for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 125 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Pipe support clip Ø90 mm STL 3D file · Countersunk screw Ø4 mm (📦 #7054)
1 object(s) - format STL
Download this 3D model of a Ø90 mm custom pipe holder in STL format. The fastening is achieved using a flat head screw Ø4 mm. This clip-on pipe holder is designed for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 90 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on tube support Ø118 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6943)
1 object(s) - format STL
Download this 3D model of a Ø118 mm snap-on tube holder in STL format. The mounting is designed with a flat head screw Ø5 mm. This clip-on pipe support is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 118 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø111 mm STL file · Flat head screw Ø5 mm (📦 #7380)
1 object(s) - format STL
3D model of a Ø111 mm pipe clip in STL format. The mounting is designed using a flat head screw Ø5 mm. This pipe clip mount is intended for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 111 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø110 mm STL file · Flat head screw Ø5 mm (📦 #5026)
1 object(s) - format STL
3D model of a Ø110 mm clip-on pipe support in STL format. The installation is achieved by means of a flat head screw Ø5 mm. This pipe clip is designed for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 110 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe support clip Ø83 mm STL 3D file · Countersunk screw Ø4 mm (📦 #7253)
1 object(s) - format STL
3D model of a Ø83 mm pipe clip holder in STL format. The fastening is done using a countersunk screw Ø4 mm. This custom pipe holder is built for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 83 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube clip Ø107 mm STL 3D file · Countersunk screw Ø3 mm (📦 #7419)
1 object(s) - format STL
Download this 3D file of a Ø107 mm snap-on pipe clip in STL format. The installation is designed with a flat head screw Ø3 mm. This custom pipe holder is intended for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 107 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Tube clip Ø106 mm STL file · Flat head screw Ø3 mm (📦 #5316)
1 object(s) - format STL
3D model of a Ø106 mm custom pipe clip in STL format. The mounting is performed with a countersunk screw Ø3 mm. This custom pipe holder is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 106 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Clip-on tube support Ø105 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6140)
1 object(s) - format STL
Download this 3D file of a Ø105 mm clip-on tube holder in STL format. The mounting is done using a flat head screw Ø5 mm. This pipe support clip is built for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 105 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe clip Ø103 mm STL 3D file · Flat head screw Ø3 mm (📦 #7252)
1 object(s) - format STL
3D model of a Ø103 mm pipe clip holder in STL format. The installation is designed with a countersunk screw Ø3 mm. This pipe support clip is intended for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 103 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Tube clip holder Ø103 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6011)
1 object(s) - format STL
Download this 3D file of a Ø103 mm custom pipe holder in STL format. The mounting is achieved by means of a flat head screw Ø5 mm. This snap-on pipe mount is intended for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 103 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø102 mm STL file · Countersunk screw Ø5 mm (📦 #4163)
1 object(s) - format STL
Download this 3D model of a Ø102 mm pipe clip holder in STL format. The installation is designed using a countersunk screw Ø5 mm. This custom pipe clip is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 102 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø80 mm STL file · Countersunk screw Ø4 mm (📦 #3532)
1 object(s) - format STL
3D model of a Ø80 mm clip-on tube holder in STL format. The mounting is performed by means of a countersunk screw Ø4 mm. This snap-on pipe clip is built for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 80 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø100 mm STL file · Countersunk screw Ø5 mm (📦 #3651)
1 object(s) - format STL
Download this 3D model of a Ø100 mm clip-on tube holder in STL format. The fastening is designed by means of a countersunk screw Ø5 mm. This clip-on pipe mount is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 100 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube support clip Ø100 mm STL 3D file · Flat head screw Ø3 mm (📦 #3295)
1 object(s) - format STL
Download this 3D file of a Ø100 mm snap-on pipe clip in STL format. The installation is done with a flat head screw Ø3 mm. This snap-on pipe clip is built for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 100 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Pipe support clip Ø93 mm STL file · Flat head screw Ø5 mm (📦 #7067)
1 object(s) - format STL
3D model of a Ø93 mm snap-on pipe mount in STL format. The fastening is achieved using a flat head screw Ø5 mm. This clip-on pipe holder is built for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 93 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe support clip Ø89 mm STL file · Countersunk screw Ø3 mm (📦 #8683)
1 object(s) - format STL
Download this 3D model of a Ø89 mm clip-on pipe holder in STL format. The installation is achieved using a flat head screw Ø3 mm. This pipe clip mount is built for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 89 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Pipe clip holder Ø150 mm STL file · Countersunk screw Ø5 mm (📦 #4129)
1 object(s) - format STL
Download this 3D model of a Ø150 mm clip-on pipe support in STL format. The mounting is done with a flat head screw Ø5 mm. This clip-on pipe holder is designed for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 150 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø70 mm STL file · Countersunk screw Ø4 mm (📦 #4027)
1 object(s) - format STL
Download this 3D model of a Ø70 mm pipe clip mount in STL format. The installation is achieved by means of a countersunk screw Ø4 mm. This snap-on pipe mount is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 70 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø68 mm STL 3D file · Flat head screw Ø4 mm (📦 #5278)
1 object(s) - format STL
3D model of a Ø68 mm custom pipe clip in STL format. The fastening is performed by means of a flat head screw Ø4 mm. This clip-on pipe support is built for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 68 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Pipe clip Ø80 mm STL 3D file · Flat head screw Ø5 mm (📦 #3309)
1 object(s) - format STL
3D model of a Ø80 mm pipe clip holder in STL format. The fastening is achieved by means of a countersunk screw Ø5 mm. This pipe clip is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 80 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe clip holder Ø80 mm STL 3D file · Flat head screw Ø3 mm (📦 #6673)
1 object(s) - format STL
3D model of a Ø80 mm snap-on pipe clip in STL format. The installation is achieved using a flat head screw Ø3 mm. This pipe clip holder is built for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 80 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Pipe support clip Ø157 mm STL file · Flat head screw Ø5 mm (📦 #3795)
1 object(s) - format STL
3D model of a Ø157 mm pipe support clip in STL format. The fastening is achieved with a countersunk screw Ø5 mm. This snap-on pipe clip is intended for a secure hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 157 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube support clip Ø65 mm STL 3D file · Flat head screw Ø4 mm (📦 #4737)
1 object(s) - format STL
Download this 3D file of a Ø65 mm clip-on tube holder in STL format. The fastening is done with a flat head screw Ø4 mm. This clip-on tube holder is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 65 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø76 mm STL 3D file · Countersunk screw Ø5 mm (📦 #4662)
1 object(s) - format STL
Download this 3D file of a Ø76 mm custom pipe clip in STL format. The fastening is performed with a flat head screw Ø5 mm. This snap-on pipe mount is intended for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 76 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø75 mm STL 3D file · Flat head screw Ø5 mm (📦 #3536)
1 object(s) - format STL
Download this 3D model of a Ø75 mm clip-on pipe support in STL format. The installation is achieved using a countersunk screw Ø5 mm. This snap-on pipe clip is built for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 75 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe support clip Ø75 mm STL file · Flat head screw Ø3 mm (📦 #7985)
1 object(s) - format STL
3D model of a Ø75 mm pipe clip mount in STL format. The installation is achieved by means of a flat head screw Ø3 mm. This clip-on pipe mount is intended for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 75 | mm |
| hole diameter | 3 | mm |
| countersunk screw | yes |
Pipe support clip Ø63 mm STL 3D file · Countersunk screw Ø4 mm (📦 #5371)
1 object(s) - format STL
Download this 3D model of a Ø63 mm pipe clip holder in STL format. The fastening is achieved by means of a flat head screw Ø4 mm. This pipe support clip is built for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 63 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube support clip Ø60 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3581)
1 object(s) - format STL
Download this 3D model of a Ø60 mm snap-on pipe mount in STL format. The mounting is done by means of a countersunk screw Ø4 mm. This pipe clip mount is intended for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 60 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |