Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 20 mm thickness: 10 mm + chamfer 📦#1934
Generation date: 2025-09-22
3D model download
Free- washer-flat-gasket-ring-inD10m_model1934-nb0_dd{id}.stl : 160 Ko
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 10 mm |
| #2 | outer diameter | 20 mm |
| #3 | thickness | 10 mm |
| #4 | finish | chamfer |
| #5 | finish position | inner |
| #6 | sides | one side |
| #7 | finish value | 1 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL 3D file ⌀ID: 20.8 mm ⌀OD: 50 mm thickness: 12 mm (📦 #2379)
1 object(s) - format STL
Model of flat gasket / washer in STL file format. This part features an internal diameter of ⌀20.8 mm and an external diameter of ⌀50 mm. The thickness is 12 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 20.8 | mm |
| outer diameter | 50 | mm |
| thickness | 12 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 12.5 mm + chamfer (📦 #1812)
1 object(s) - format STL
Download this model of washer / flat gasket in STL 3D file format. This part has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 12.5 mm. A chamfer is applied on the internal diameter with a value of 0.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 12.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 25 mm ⌀OD: 35 mm thickness: 3 mm + chamfer (📦 #1906)
1 object(s) - format STL
File of gasket / washer in STL file format. This part features an internal diameter of ⌀25 mm and an external diameter of ⌀35 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25 | mm |
| outer diameter | 35 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 48 mm thickness: 6 mm (📦 #1831)
1 object(s) - format STL
Download this 3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀32 mm and an outer diameter of ⌀48 mm. The total thickness is 6 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 32 | mm |
| outer diameter | 48 | mm |
| thickness | 6 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.5 mm (📦 #2341)
1 object(s) - format STL
File of washer / gasket in STL format. This part has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The total thickness is 3.5 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.2 mm (📦 #2342)
1 object(s) - format STL
Model of gasket / washer in STL file format. This part has an internal diameter of ⌀16.5 mm and an external diameter of ⌀25.0 mm. The total thickness is 3.2 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1814)
1 object(s) - format STL
Download this file of gasket / washer in STL format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 2.0 mm (📦 #2329)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The part thickness is 2.0 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 2.0 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 38.2 mm ⌀OD: 43 mm thickness: 3 mm (📦 #1952)
1 object(s) - format STL
3D file of washer / flat gasket in STL format. This part has an internal diameter of ⌀38.2 mm and an external diameter of ⌀43 mm. The part thickness is 3 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 38.2 | mm |
| outer diameter | 43 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 18 mm ⌀OD: 20 mm thickness: 1.2 mm (📦 #1714)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This part has an inner diameter of ⌀18 mm and an outer diameter of ⌀20 mm. The thickness is 1.2 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 20 | mm |
| thickness | 1.2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 10 mm ⌀OD: 12 mm thickness: 1 mm (📦 #2087)
1 object(s) - format STL (4.0/5) 1 vote(s)
Download this file of flat gasket / washer in STL file format. This model features an inner diameter of ⌀10 mm and an outer diameter of ⌀12 mm. The part thickness is 1 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 12 | mm |
| thickness | 1 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers (📦 #1699)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 6 mm. Chamfers are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 10.1 mm thickness: 1 mm (📦 #2348)
1 object(s) - format STL
File of washer / gasket in STL 3D file format. This model has an inner diameter of ⌀10 mm and an outer diameter of ⌀10.1 mm. The part thickness is 1 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 10.1 | mm |
| thickness | 1 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 38.6 mm ⌀OD: 42.8 mm thickness: 2 mm (📦 #1761)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀38.6 mm and an outer diameter of ⌀42.8 mm. The part thickness is 2 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 38.6 | mm |
| outer diameter | 42.8 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 10 mm (📦 #1741)
1 object(s) - format STL
File of gasket / washer in STL format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀60.1 mm. The total thickness is 10 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 60.1 | mm |
| thickness | 10 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet (📦 #2271)
1 object(s) - format STL
Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 50 | mm |
| outer diameter | 55 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm (📦 #1816)
1 object(s) - format STL
Download this file of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀57 mm and an outer diameter of ⌀71 mm. The total thickness is 5 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 38.7 mm ⌀OD: 42.8 mm thickness: 1 mm (📦 #1762)
1 object(s) - format STL
File of gasket / washer in STL file format. This model has an internal diameter of ⌀38.7 mm and an external diameter of ⌀42.8 mm. The part thickness is 1 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 38.7 | mm |
| outer diameter | 42.8 | mm |
| thickness | 1 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers (📦 #1698)
1 object(s) - format STL
3D model of washer / gasket in STL format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The part thickness is 4 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | two sides | |
| finish value | 1.5 | mm |