?>

Pipe elbow 1° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm 📦#1706

STL Download STL
Create a new model:
from scratch search for a model
Model of a pipe elbow with a 1° angle in STL format. This elbow features an outer diameter of 90 mm and an inner diameter of 82 mm. The tube thickness is therefore 4 mm.
Generation date: 2025-09-11
3D Model Pipe elbow 1° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm

3D model download

Free
  • pipe-elbow-ouD90mm-inD82mm-deg_model1706-nb0_dd{id}.stl : 147.7 Ko
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
(Internal and private use, non-commercial – no distribution – no derivatives)

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 90 mm
#2 inner diameter 82 mm
#3 angle 1 °
#4 end fillets no
illustration of the parameters
Representation of the parameters

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm (📦 #1490)

1 object(s) - format STL
3D model Pipe elbow 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
Pipe elbow 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
3D file of a pipe elbow with a 1° angle in STL format. This pipe elbow features an outer diameter of 123 mm and an inner diameter of 120 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter123mm
inner diameter120mm
angle1°
end fillets0

Pipe elbow 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm (📦 #1374)

1 object(s) - format STL
3D model Pipe elbow 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm
Pipe elbow 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm
3D model of an elbow with a 30° angle in STL format. This pipe elbow has an outer diameter of 60 mm and an inner diameter of 58 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter60mm
inner diameter58mm
angle30°
end fillets0

Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1370)

1 object(s) - format STL (5.0/5) 1 vote(s)
3D model Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This elbow has an outer diameter of 90 mm and an inner diameter of 82 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter90mm
inner diameter82mm
angle45°
end fillets0

Pipe elbow 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm (📦 #1363)

1 object(s) - format STL
3D model Pipe elbow 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm
Pipe elbow 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm
Model of an elbow with a 30° angle in STL format. This pipe elbow has an outer diameter of 50 mm and an inner diameter of 46 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter50mm
inner diameter46mm
angle30°
end fillets0

Pipe elbow 1° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1434)

1 object(s) - format STL
3D model Pipe elbow 1° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
Pipe elbow 1° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D file of an elbow with a 1° angle in STL format. This elbow features an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter40mm
inner diameter34mm
angle1°
end fillets0

Pipe elbow 10° ⌀OD: 40 mm ⌀ID: 34.8 mm thickness: 2.6 mm (📦 #1740)

1 object(s) - format STL
3D model Pipe elbow 10° ⌀OD: 40 mm ⌀ID: 34.8 mm thickness: 2.6 mm
Pipe elbow 10° ⌀OD: 40 mm ⌀ID: 34.8 mm thickness: 2.6 mm
3D file of a pipe elbow with a 10° angle in STL format. This elbow features an external diameter of 40 mm and an internal diameter of 34.8 mm. This results in a tube thickness of 2.6 mm.
Parameter Value Unit
outer diameter40mm
inner diameter34.8mm
angle10°
end fillets0

Pipe elbow 10° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1369)

1 object(s) - format STL
3D model Pipe elbow 10° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
Pipe elbow 10° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
File of a pipe elbow with a 10° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter40mm
inner diameter34mm
angle10°
end fillets0

Pipe elbow 25° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1420)

1 object(s) - format STL
3D model Pipe elbow 25° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
Pipe elbow 25° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of an elbow with a 25° angle in STL format. This elbow has an external diameter of 40 mm and an internal diameter of 34 mm. The tube thickness is therefore 3 mm.
Parameter Value Unit
outer diameter40mm
inner diameter34mm
angle25°
end fillets0

Pipe elbow 20° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm (📦 #1840)

1 object(s) - format STL
3D model Pipe elbow 20° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm
Pipe elbow 20° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm
3D file of an elbow with a 20° angle in STL format. This elbow has an external diameter of 38.5 mm and an internal diameter of 30.5 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter38.5mm
inner diameter30.5mm
angle20°
end fillets0

Pipe elbow 20° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm (📦 #1836)

1 object(s) - format STL
3D model Pipe elbow 20° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm
Pipe elbow 20° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm
3D file of an elbow with a 20° angle in STL format. This pipe elbow features an external diameter of 34 mm and an internal diameter of 30 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter34mm
inner diameter30mm
angle20°
end fillets0

Pipe elbow 45° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1401)

1 object(s) - format STL
3D model Pipe elbow 45° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
Pipe elbow 45° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of an elbow with a 45° angle in STL format. This elbow has an external diameter of 40 mm and an internal diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter40mm
inner diameter34mm
angle45°
end fillets0

Pipe elbow 30° ⌀OD: 22 mm ⌀ID: 20 mm thickness: 1 mm (📦 #1362)

1 object(s) - format STL
3D model Pipe elbow 30° ⌀OD: 22 mm ⌀ID: 20 mm thickness: 1 mm
Pipe elbow 30° ⌀OD: 22 mm ⌀ID: 20 mm thickness: 1 mm
File of a pipe elbow with a 30° angle in STL format. This elbow has an outer diameter of 22 mm and an inner diameter of 20 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter22mm
inner diameter20mm
angle30°
end fillets0

Pipe elbow 30° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm (📦 #1409)

1 object(s) - format STL
3D model Pipe elbow 30° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm
Pipe elbow 30° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm
Model of an elbow with a 30° angle in STL format. This elbow features an outer diameter of 20 mm and an inner diameter of 18 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter20mm
inner diameter18mm
angle30°
end fillets0

Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1445)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 90° angle in STL format. This elbow has an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter90mm
inner diameter82mm
angle90°
end fillets0

Pipe elbow 60° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1406)

1 object(s) - format STL
3D model Pipe elbow 60° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
Pipe elbow 60° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
3D file of a pipe elbow with a 60° angle in STL format. This elbow has an outer diameter of 28 mm and an inner diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter28mm
inner diameter26mm
angle60°
end fillets0

Pipe elbow 45° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1355)

1 object(s) - format STL
3D model Pipe elbow 45° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
Pipe elbow 45° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
File of an elbow with a 45° angle in STL format. This elbow features an outer diameter of 18 mm and an inner diameter of 16 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter18mm
inner diameter16mm
angle45°
end fillets0

Pipe elbow 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm (📦 #1353)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm
Pipe elbow 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm
Model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 120 mm and an inner diameter of 110 mm. This results in a tube thickness of 5 mm.
Parameter Value Unit
outer diameter120mm
inner diameter110mm
angle90°
end fillets0

Pipe elbow 60° ⌀OD: 21 mm ⌀ID: 20 mm thickness: 0.5 mm (📦 #1822)

1 object(s) - format STL
3D model Pipe elbow 60° ⌀OD: 21 mm ⌀ID: 20 mm thickness: 0.5 mm
Pipe elbow 60° ⌀OD: 21 mm ⌀ID: 20 mm thickness: 0.5 mm
File of an elbow with a 60° angle in STL format. This pipe elbow features an external diameter of 21 mm and an internal diameter of 20 mm. This results in a tube thickness of 0.5 mm.
Parameter Value Unit
outer diameter21mm
inner diameter20mm
angle60°
end fillets0

Pipe elbow 70° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1405)

1 object(s) - format STL
3D model Pipe elbow 70° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
Pipe elbow 70° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
Model of an elbow with a 70° angle in STL format. This pipe elbow has an outer diameter of 28 mm and an inner diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter28mm
inner diameter26mm
angle70°
end fillets0

Pipe elbow 70° ⌀OD: 27.5 mm ⌀ID: 26 mm thickness: 0.75 mm (📦 #1404)

1 object(s) - format STL
3D model Pipe elbow 70° ⌀OD: 27.5 mm ⌀ID: 26 mm thickness: 0.75 mm
Pipe elbow 70° ⌀OD: 27.5 mm ⌀ID: 26 mm thickness: 0.75 mm
3D model of a pipe elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 27.5 mm and an inner diameter of 26 mm. This results in a tube thickness of 0.75 mm.
Parameter Value Unit
outer diameter27.5mm
inner diameter26mm
angle70°
end fillets0

Pipe elbow 75° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1407)

1 object(s) - format STL
3D model Pipe elbow 75° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
Pipe elbow 75° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
File of a pipe elbow with a 75° angle in STL format. This elbow has an external diameter of 28 mm and an internal diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter28mm
inner diameter26mm
angle75°
end fillets0

Pipe elbow 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm (📦 #1552)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm
Pipe elbow 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm
3D file of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 43 mm and an inner diameter of 39.2 mm. This results in a tube thickness of 1.9 mm.
Parameter Value Unit
outer diameter43mm
inner diameter39.2mm
angle90°
end fillets0

Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1636)

1 object(s) - format STL
3D model Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter90mm
inner diameter82mm
angle45°
end fillets1

Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1367)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter40mm
inner diameter34mm
angle90°
end fillets0

Pipe elbow 70° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1665)

1 object(s) - format STL
3D model Pipe elbow 70° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
Pipe elbow 70° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
3D model of an elbow with a 70° angle in STL format. This elbow features an external diameter of 18 mm and an internal diameter of 16 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter18mm
inner diameter16mm
angle70°
end fillets0

Pipe elbow 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1417)

1 object(s) - format STL
3D model Pipe elbow 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
Pipe elbow 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter160mm
inner diameter155mm
angle70°
end fillets0

Pipe elbow 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm (📦 #1375)

1 object(s) - format STL
3D model Pipe elbow 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm
Pipe elbow 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm
3D file of an elbow with a 37° angle in STL format. This elbow has an external diameter of 48 mm and an internal diameter of 44 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter48mm
inner diameter44mm
angle37°
end fillets1

Pipe elbow 90° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1403)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
Pipe elbow 90° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
File of an elbow with a 90° angle in STL format. This elbow features an external diameter of 28 mm and an internal diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter28mm
inner diameter26mm
angle90°
end fillets0

Pipe elbow 90° ⌀OD: 27 mm ⌀ID: 25 mm thickness: 1 mm (📦 #1824)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 27 mm ⌀ID: 25 mm thickness: 1 mm
Pipe elbow 90° ⌀OD: 27 mm ⌀ID: 25 mm thickness: 1 mm
Model of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 27 mm and an inner diameter of 25 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter27mm
inner diameter25mm
angle90°
end fillets0

Pipe elbow 90° ⌀OD: 26 mm ⌀ID: 21 mm thickness: 2.5 mm (📦 #1444)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 26 mm ⌀ID: 21 mm thickness: 2.5 mm
Pipe elbow 90° ⌀OD: 26 mm ⌀ID: 21 mm thickness: 2.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 26 mm and an inner diameter of 21 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter26mm
inner diameter21mm
angle90°
end fillets0