?>

Pipe elbow STL file 30° ⌀OD: 22 mm ⌀ID: 20 mm thickness: 1 mm 📦#1362

STL Download STL
Create a new model:
from scratch search for a model
File of a pipe elbow with a 30° angle in STL format. This elbow has an outer diameter of 22 mm and an inner diameter of 20 mm. This results in a tube thickness of 1 mm.
Generation date: 2025-08-16
3D Model Pipe elbow STL file 30° ⌀OD: 22 mm ⌀ID: 20 mm thickness: 1 mm

3D model download

Free
  • pipe-elbow-ouD22mm-inD20mm-deg_model1362-nb0_dd{id}.stl : 344.6 Ko
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 22 mm
#2 inner diameter 20 mm
#3 angle 30 °
#4 end fillets no
illustration of the parameters
Representation of the parameters

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow STL 3D file 30° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm (📦 #1409)

1 object(s) - format STL
Pipe elbow STL 3D file 30° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm
Model of an elbow with a 30° angle in STL format. This elbow features an outer diameter of 20 mm and an inner diameter of 18 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 20 mm
inner diameter 18 mm
angle 30 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1355)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
File of an elbow with a 45° angle in STL format. This elbow features an outer diameter of 18 mm and an inner diameter of 16 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 45 °
end fillets no

Pipe elbow STL file 20° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm (📦 #1836)

1 object(s) - format STL
Pipe elbow STL file 20° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm
3D file of an elbow with a 20° angle in STL format. This pipe elbow features an external diameter of 34 mm and an internal diameter of 30 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 34 mm
inner diameter 30 mm
angle 20 °
end fillets no

Pipe elbow STL file 20° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm (📦 #1840)

1 object(s) - format STL
Pipe elbow STL file 20° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm
3D file of an elbow with a 20° angle in STL format. This elbow has an external diameter of 38.5 mm and an internal diameter of 30.5 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter 38.5 mm
inner diameter 30.5 mm
angle 20 °
end fillets no

Pipe elbow STL file 45° ⌀OD: 35 mm ⌀ID: 11 mm thickness: 12 mm (📦 #2240)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 35 mm ⌀ID: 11 mm thickness: 12 mm
3D model of a pipe elbow with a 45° angle in STL format. This elbow has an external diameter of 35 mm and an internal diameter of 11 mm. This results in a tube thickness of 12 mm.
Parameter Value Unit
outer diameter 35 mm
inner diameter 11 mm
angle 45 °
end fillets no

Pipe elbow STL file 25° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1420)

1 object(s) - format STL
Pipe elbow STL file 25° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of an elbow with a 25° angle in STL format. This elbow has an external diameter of 40 mm and an internal diameter of 34 mm. The tube thickness is therefore 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 25 °
end fillets no

Pipe elbow STL 3D file 15° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm (📦 #1880)

1 object(s) - format STL
Pipe elbow STL 3D file 15° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm
3D model of a pipe elbow with a 15° angle in STL format. This pipe elbow has an external diameter of 38.5 mm and an internal diameter of 30.5 mm. This results in a tube thickness of 4 mm.
Parameter Value Unit
outer diameter 38.5 mm
inner diameter 30.5 mm
angle 15 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1401)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of an elbow with a 45° angle in STL format. This elbow has an external diameter of 40 mm and an internal diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 45 °
end fillets no

Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1369)

1 object(s) - format STL
Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
File of a pipe elbow with a 10° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 10 °
end fillets no

Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34.8 mm thickness: 2.6 mm (📦 #1740)

1 object(s) - format STL
Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34.8 mm thickness: 2.6 mm
3D file of a pipe elbow with a 10° angle in STL format. This elbow features an external diameter of 40 mm and an internal diameter of 34.8 mm. This results in a tube thickness of 2.6 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34.8 mm
angle 10 °
end fillets no

Pipe elbow STL 3D file 60° ⌀OD: 21 mm ⌀ID: 20 mm thickness: 0.5 mm (📦 #1822)

1 object(s) - format STL
Pipe elbow STL 3D file 60° ⌀OD: 21 mm ⌀ID: 20 mm thickness: 0.5 mm
File of an elbow with a 60° angle in STL format. This pipe elbow features an external diameter of 21 mm and an internal diameter of 20 mm. This results in a tube thickness of 0.5 mm.
Parameter Value Unit
outer diameter 21 mm
inner diameter 20 mm
angle 60 °
end fillets no

Pipe elbow STL 3D file 60° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm (📦 #2143)

1 object(s) - format STL
Pipe elbow STL 3D file 60° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm
3D model of an elbow with a 60° angle in STL format. This elbow features an outer diameter of 18 mm and an inner diameter of 15 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 15 mm
angle 60 °
end fillets no

Pipe elbow STL 3D file 60° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1406)

1 object(s) - format STL
Pipe elbow STL 3D file 60° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
3D file of a pipe elbow with a 60° angle in STL format. This elbow has an outer diameter of 28 mm and an inner diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 28 mm
inner diameter 26 mm
angle 60 °
end fillets no

Pipe elbow STL 3D file 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm (📦 #1363)

1 object(s) - format STL
Pipe elbow STL 3D file 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm
Model of an elbow with a 30° angle in STL format. This pipe elbow has an outer diameter of 50 mm and an inner diameter of 46 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 50 mm
inner diameter 46 mm
angle 30 °
end fillets no

Pipe elbow STL 3D file 1° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1434)

1 object(s) - format STL
Pipe elbow STL 3D file 1° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D file of an elbow with a 1° angle in STL format. This elbow features an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 1 °
end fillets no

Pipe elbow STL 3D file 70° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1665)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
3D model of an elbow with a 70° angle in STL format. This elbow features an external diameter of 18 mm and an internal diameter of 16 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 70 °
end fillets no

Pipe elbow STL file 70° ⌀OD: 27.5 mm ⌀ID: 26 mm thickness: 0.75 mm (📦 #1404)

1 object(s) - format STL
Pipe elbow STL file 70° ⌀OD: 27.5 mm ⌀ID: 26 mm thickness: 0.75 mm
3D model of a pipe elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 27.5 mm and an inner diameter of 26 mm. This results in a tube thickness of 0.75 mm.
Parameter Value Unit
outer diameter 27.5 mm
inner diameter 26 mm
angle 70 °
end fillets no

Pipe elbow STL 3D file 70° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1405)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
Model of an elbow with a 70° angle in STL format. This pipe elbow has an outer diameter of 28 mm and an inner diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 28 mm
inner diameter 26 mm
angle 70 °
end fillets no

Pipe elbow STL file 60° ⌀OD: 50 mm ⌀ID: 40.5 mm thickness: 4.75 mm (📦 #1909)

1 object(s) - format STL
Pipe elbow STL file 60° ⌀OD: 50 mm ⌀ID: 40.5 mm thickness: 4.75 mm
3D model of an elbow with a 60° angle in STL format. This elbow has an external diameter of 50 mm and an internal diameter of 40.5 mm. This results in a tube thickness of 4.75 mm.
Parameter Value Unit
outer diameter 50 mm
inner diameter 40.5 mm
angle 60 °
end fillets no

Pipe elbow STL file 75° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1407)

1 object(s) - format STL
Pipe elbow STL file 75° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
File of a pipe elbow with a 75° angle in STL format. This elbow has an external diameter of 28 mm and an internal diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 28 mm
inner diameter 26 mm
angle 75 °
end fillets no

Pipe elbow STL file 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm (📦 #1374)

1 object(s) - format STL
Pipe elbow STL file 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm
3D model of an elbow with a 30° angle in STL format. This pipe elbow has an outer diameter of 60 mm and an inner diameter of 58 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 60 mm
inner diameter 58 mm
angle 30 °
end fillets no

Pipe elbow STL file 89° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1354)

1 object(s) - format STL
Pipe elbow STL file 89° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
3D file of an elbow with an 89° angle in STL format. This pipe elbow has an outer diameter of 18 mm and an inner diameter of 16 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 89 °
end fillets no

Pipe elbow STL file 80° ⌀OD: 48.3 mm ⌀ID: 42.1 mm thickness: 3.1 mm (📦 #2126)

1 object(s) - format STL
Pipe elbow STL file 80° ⌀OD: 48.3 mm ⌀ID: 42.1 mm thickness: 3.1 mm
Model of a pipe elbow with an 80° angle in STL format. This elbow has an external diameter of 48.3 mm and an internal diameter of 42.1 mm. This results in a tube thickness of 3.1 mm.
Parameter Value Unit
outer diameter 48.3 mm
inner diameter 42.1 mm
angle 80 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm (📦 #1506)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 20 mm and an inner diameter of 18 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 20 mm
inner diameter 18 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 25 mm ⌀ID: 18 mm thickness: 3.5 mm (📦 #1507)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 25 mm ⌀ID: 18 mm thickness: 3.5 mm
3D model of an elbow with a 90° angle in STL format. This elbow has an external diameter of 25 mm and an internal diameter of 18 mm. This results in a tube thickness of 3.5 mm.
Parameter Value Unit
outer diameter 25 mm
inner diameter 18 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 26 mm ⌀ID: 21 mm thickness: 2.5 mm (📦 #1444)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 26 mm ⌀ID: 21 mm thickness: 2.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 26 mm and an inner diameter of 21 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 26 mm
inner diameter 21 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 20 mm ⌀ID: 16 mm thickness: 2 mm (📦 #1505)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 20 mm ⌀ID: 16 mm thickness: 2 mm
Model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 20 mm and an internal diameter of 16 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 20 mm
inner diameter 16 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1411)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 18 mm and an internal diameter of 16 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 17.5 mm ⌀ID: 15.5 mm thickness: 1 mm (📦 #1410)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 17.5 mm ⌀ID: 15.5 mm thickness: 1 mm
3D model of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 17.5 mm and an internal diameter of 15.5 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 17.5 mm
inner diameter 15.5 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 27 mm ⌀ID: 25 mm thickness: 1 mm (📦 #1824)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 27 mm ⌀ID: 25 mm thickness: 1 mm
Model of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 27 mm and an inner diameter of 25 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 27 mm
inner diameter 25 mm
angle 90 °
end fillets no