Enclosure with screw-mounted lid STL 3D file: 200×50×300 mm (with ventilation on the lid and under the enclosure) 📦#1221
Generation date: 2025-07-20
3D model download
Free- object #0 enclosure-with-screw-mounted-l_model1221-nb0_dd{id}.stl : 1 Mo
- object #1 enclosure-with-screw-mounted-l_model1221-nb1_dd{id}.stl : 980 Ko
STL
Mesh quality :
not defined
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Enclosure with screw-mounted lid template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | length | 200 mm |
| #2 | width | 50 mm |
| #3 | total height | 300 mm |
| #4 | lid height | 60 mm |
| #5 | wall thickness | 6 mm |
| #6 | screw margin | 0 mm |
| #7 | fit clearance | 0.1 mm |
| #8 | cooling level | 6 |
| #9 | cooling zone(s) | cutouts on both |
Representation of the parameters
- The thickness of the upper lid shell is always 5 mm.
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 length | len |
| #2 width | wid |
| #3 total height | Thei |
| #4 lid height | Lhei |
| #5 wall thickness | waT |
| #6 screw margin | Tmrg |
| #7 fit clearance | Imrg |
| #8 cooling level | cooL |
| #9 cooling zone(s) | cooZ |
Related 3D models
To search for a model based on your own parameters, go to the template page Enclosure with screw-mounted lid
Enclosure with screw-mounted lid STL file: 77×77×300 mm (📦 #2264)
2 object(s) - format STL
Enclosure with lid in 3D STL format. The dimensions are 77 mm long by 77 mm wide and 300 mm high. The lid is 60 mm high. Wall thickness is 3 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 77 | mm |
| width | 77 | mm |
| total height | 300 | mm |
| lid height | 60 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 150×150×200 mm (📦 #1435)
2 object(s) - format STL
Download this enclosure with lid in STL format. The dimensions are 150 mm long by 150 mm wide and 200 mm high. The cover measures 30 mm high. Wall thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 150 | mm |
| width | 150 | mm |
| total height | 200 | mm |
| lid height | 30 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.2 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 150×100×60 mm (with ventilation on the lid and under the enclosure) (📦 #1667)
2 object(s) - format STL
Enclosure with screwed lid in 3D STL format. The dimensions are 150 mm long by 100 mm wide and 60 mm high. The lid is 19 mm high. Wall thickness is 4 mm. This enclosure has marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 150 | mm |
| width | 100 | mm |
| total height | 60 | mm |
| lid height | 19 | mm |
| wall thickness | 4 | mm |
| screw margin | -0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 6 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 158×110×60 mm (with ventilation under the enclosure) (📦 #1671)
2 object(s) - format STL
Download this enclosure with a screwed lid in 3D STL format. The dimensions are 158 mm long by 110 mm wide and 60 mm high. The cover is 19 mm high. Side thickness is 4 mm. This enclosure features marked cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 158 | mm |
| width | 110 | mm |
| total height | 60 | mm |
| lid height | 19 | mm |
| wall thickness | 4 | mm |
| screw margin | -0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 158×110×60 mm (with ventilation under the enclosure) (📦 #1668)
2 object(s) - format STL
Enclosure with screwed lid in 3D STL format. The dimensions are 158 mm long by 110 mm wide and 60 mm high. The lid measures 19 mm high. Side thickness is 4 mm. This enclosure features marked cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 158 | mm |
| width | 110 | mm |
| total height | 60 | mm |
| lid height | 19 | mm |
| wall thickness | 4 | mm |
| screw margin | -0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 158×110×60 mm (with ventilation on the lid and under the enclosure) (📦 #1670)
2 object(s) - format STL
Enclosure with a screwed lid in 3D STL format. The dimensions are 158 mm long by 110 mm wide and 60 mm high. The cover measures 19 mm high. Side thickness is 4 mm. This enclosure features marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 158 | mm |
| width | 110 | mm |
| total height | 60 | mm |
| lid height | 19 | mm |
| wall thickness | 4 | mm |
| screw margin | -0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 158×110×60 mm (with ventilation on the lid) (📦 #1669)
2 object(s) - format STL
Enclosure with lid in STL format. The dimensions are 158 mm long by 110 mm wide and 60 mm high. The cover is 19 mm high. Side thickness is 4 mm. This enclosure has marked cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 158 | mm |
| width | 110 | mm |
| total height | 60 | mm |
| lid height | 19 | mm |
| wall thickness | 4 | mm |
| screw margin | -0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 120×120×80 mm (with ventilation on the lid and under the enclosure) (📦 #1825)
2 object(s) - format STL
Download this enclosure model with screwed lid in STL format. The dimensions are 120 mm long by 120 mm wide and 80 mm high. The cover is 15 mm high. Wall thickness is 4 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 120 | mm |
| total height | 80 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 300×100×60 mm (📦 #1149)
2 object(s) - format STL
Enclosure model with screwed lid in STL format. The dimensions are 300 mm long by 100 mm wide and 60 mm high. The lid is 20 mm high. Wall thickness is 5 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 300 | mm |
| width | 100 | mm |
| total height | 60 | mm |
| lid height | 20 | mm |
| wall thickness | 5 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 220×100×60 mm (with ventilation on the lid) (📦 #1601)
2 object(s) - format STL
Download this enclosure with a screwed lid in STL format. The dimensions are 220 mm long by 100 mm wide and 60 mm high. The cover only measures 15 mm high. Wall thickness is 4 mm. This enclosure has strong cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 220 | mm |
| width | 100 | mm |
| total height | 60 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 86×86×179 mm (📦 #2265)
2 object(s) - format STL
Enclosure model with lid in STL format. The dimensions are 86 mm long by 86 mm wide and 179 mm high. The cover measures 10 mm high. Wall thickness is 4 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 86 | mm |
| width | 86 | mm |
| total height | 179 | mm |
| lid height | 10 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 190×140×70 mm (with ventilation on the lid) (📦 #1630)
2 object(s) - format STL
Enclosure with screwed lid in 3D STL format. The dimensions are 190 mm long by 140 mm wide and 70 mm high. The lid measures 15 mm high. Side thickness is 5 mm. This enclosure features marked cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 190 | mm |
| width | 140 | mm |
| total height | 70 | mm |
| lid height | 15 | mm |
| wall thickness | 5 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.2 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 200×120×45 mm (with ventilation on the lid and under the enclosure) (📦 #1142)
2 object(s) - format STL
Download this enclosure with lid in 3D STL format. The dimensions are 200 mm long by 120 mm wide and 45 mm high. The cover is 15 mm high. Side thickness is 4 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 120 | mm |
| total height | 45 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 150×80×40 mm (📦 #1175)
2 object(s) - format STL
Enclosure model with lid in STL format. The dimensions are 150 mm long by 80 mm wide and 40 mm high. The lid is 20 mm high. Wall thickness is 4 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 150 | mm |
| width | 80 | mm |
| total height | 40 | mm |
| lid height | 20 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 250×150×175 mm (📦 #1958)
2 object(s) - format STL
Download this enclosure with a screwed lid in STL format. The dimensions are 250 mm long by 150 mm wide and 175 mm high. The lid only is 10 mm high. Wall thickness is 4 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 250 | mm |
| width | 150 | mm |
| total height | 175 | mm |
| lid height | 10 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.2 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 200×100×85 mm (with ventilation on the lid and under the enclosure) (📦 #2080)
2 object(s) - format STL
Download this enclosure model with screwed lid in 3D STL format. The dimensions are 200 mm long by 100 mm wide and 85 mm high. The cover only is 10 mm high. Side thickness is 3 mm. This enclosure has strong cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 100 | mm |
| total height | 85 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 140×90×30 mm (with ventilation on the lid and under the enclosure) (📦 #1145)
2 object(s) - format STL
Download this enclosure with a screwed lid in 3D STL format. The dimensions are 140 mm long by 90 mm wide and 30 mm high. The lid measures 15 mm high. Wall thickness is 4 mm. This enclosure has cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 140 | mm |
| width | 90 | mm |
| total height | 30 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 4 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 120×100×45 mm (with ventilation on the lid) (📦 #1136)
2 object(s) - format STL (4.3/5) 3 vote(s)
Download this enclosure with screwed lid in STL format. The dimensions are 120 mm long by 100 mm wide and 45 mm high. The cover is 15 mm high. Side thickness is 4 mm. This enclosure features strong cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 100 | mm |
| total height | 45 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 80×80×40 mm (with ventilation on the lid and under the enclosure) (📦 #1139)
2 object(s) - format STL
Enclosure model with screwed lid in STL format. The dimensions are 80 mm long by 80 mm wide and 40 mm high. The cover only measures 15 mm high. Side thickness is 4 mm. This enclosure has marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 80 | mm |
| width | 80 | mm |
| total height | 40 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 110×70×35 mm (📦 #1158)
2 object(s) - format STL
Download this enclosure with a screwed lid in STL format. The dimensions are 110 mm long by 70 mm wide and 35 mm high. The lid measures 20 mm high. Wall thickness is 4 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 110 | mm |
| width | 70 | mm |
| total height | 35 | mm |
| lid height | 20 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 120×80×80 mm (📦 #1744)
2 object(s) - format STL
Download this enclosure with screwed lid in STL format. The dimensions are 120 mm long by 80 mm wide and 80 mm high. The cover is 15 mm high. Wall thickness is 4 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 80 | mm |
| total height | 80 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.2 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 200×80×30 mm (with ventilation under the enclosure) (📦 #1660)
2 object(s) - format STL
Download this enclosure model with lid in 3D STL format. The dimensions are 200 mm long by 80 mm wide and 30 mm high. The cover only measures 20 mm high. Side thickness is 3 mm. This enclosure features marked cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 200 | mm |
| width | 80 | mm |
| total height | 30 | mm |
| lid height | 20 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.2 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 60×60×60 mm (with ventilation under the enclosure) (📦 #1137)
2 object(s) - format STL
Download this enclosure with a screwed lid in 3D STL format. The dimensions are 60 mm long by 60 mm wide and 60 mm high. The lid is 30 mm high. Wall thickness is 2 mm. This enclosure features strong cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 60 | mm |
| width | 60 | mm |
| total height | 60 | mm |
| lid height | 30 | mm |
| wall thickness | 2 | mm |
| screw margin | 0.2 | mm |
| fit clearance | 0.2 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 120×60×75 mm (with ventilation on the lid and under the enclosure) (📦 #2159)
2 object(s) - format STL
Enclosure with lid in 3D STL format. The dimensions are 120 mm long by 60 mm wide and 75 mm high. The lid only measures 10 mm high. Side thickness is 3 mm. This enclosure features marked cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 75 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL file: 180×130×60 mm (with ventilation on the lid and under the enclosure) (📦 #1249)
2 object(s) - format STL
Enclosure model with a screwed lid in STL format. The dimensions are 180 mm long by 130 mm wide and 60 mm high. The cover is 20 mm high. Wall thickness is 2 mm. This enclosure has significant cooling area on the lid and under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 180 | mm |
| width | 130 | mm |
| total height | 60 | mm |
| lid height | 20 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on b... |
Enclosure with screw-mounted lid STL 3D file: 120×60×75 mm (with ventilation on the lid) (📦 #2160)
2 object(s) - format STL
Enclosure with a screwed lid in 3D STL format. The dimensions are 120 mm long by 60 mm wide and 75 mm high. The cover only measures 10 mm high. Side thickness is 3 mm. This enclosure features significant cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 75 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 180×130×60 mm (with ventilation on the lid) (📦 #1250)
2 object(s) - format STL
Download this enclosure model with a screwed lid in STL format. The dimensions are 180 mm long by 130 mm wide and 60 mm high. The cover is 20 mm high. Side thickness is 2 mm. This enclosure features significant cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 180 | mm |
| width | 130 | mm |
| total height | 60 | mm |
| lid height | 20 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 10 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 100×50×40 mm (📦 #2422)
2 object(s) - format STL
Download this enclosure with lid in 3D STL format. The dimensions are 100 mm long by 50 mm wide and 40 mm high. The cover is 20 mm high. Wall thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 100 | mm |
| width | 50 | mm |
| total height | 40 | mm |
| lid height | 20 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 100×80×30 mm (with ventilation under the enclosure) (📦 #1544)
2 object(s) - format STL
Download this enclosure with lid in 3D STL format. The dimensions are 100 mm long by 80 mm wide and 30 mm high. The lid measures 20 mm high. Wall thickness is 3 mm. This enclosure features significant cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 100 | mm |
| width | 80 | mm |
| total height | 30 | mm |
| lid height | 20 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.2 | mm |
| cooling level | 8 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 130×90×40 mm (📦 #1176)
2 object(s) - format STL
Enclosure model with lid in 3D STL format. The dimensions are 130 mm long by 90 mm wide and 40 mm high. The cover is 15 mm high. Side thickness is 4 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 130 | mm |
| width | 90 | mm |
| total height | 40 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |