Tube adapter ⌀ 85–60 mm (Length: 45 mm) 📦#1165
Generation date: 2025-07-09



3D model download
Free- inline-tube-adapter-lenA20mm-d_model1165-nb0_dd{id}.stl : 6.2 Mo
STL
Mesh quality :
not defined
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
Template parameter | Value | Unit | Label | |
---|---|---|---|---|
#1 | side A length | 20 | mm | lenA |
#2 | side A outer diameter | 85 | mm | diA |
#3 | side A thickness | 3 | mm | thA |
#4 | side B length | 20 | mm | lenB |
#5 | side B outer diameter | 60 | mm | diB |
#6 | side B thickness | 3 | mm | thB |
#7 | transition length | 5 | mm | tra |
#8 | axis offset | 0 | mm | ofs |
#9 | ends fillet | 0 | 0,1,2,3 | fil |

Representation of the parameters
The transition refers to the connection interface between the two tubes. It defines the total length of the adapter, which is equal to the sum of the tube lengths plus the length of the transition.
Details for parameter #9 ends fillet:
- 0: no fillet
- 1: fillet on the outside
- 2: fillet on the inside
- 3: fillet on both inside and outside
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL format. Length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 80 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 50 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)
1 object(s) - format STL
Tube adapter ⌀76 mm to ⌀50 mm in STL format. Length of this reducer is 80 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 76 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 50 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)
1 object(s) - format STL (4.5/5) 2 vote(s)
Diameter adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 80 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 70 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 4.9 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 60–45 mm (Length: 75 mm) (📦 #1234)
1 object(s) - format STL
Tube coupler ⌀60 mm to ⌀45 mm in STL format. Final length of this adapter is 75 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 60 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 45 | mm |
side B thickness | 3 | mm |
transition length | 15 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)
1 object(s) - format STL
Diameter adapter ⌀85 mm to ⌀70 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are off-center. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 85 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 70 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 7.4 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 64–49 mm (Length: 65 mm) (📦 #1230)
1 object(s) - format STL
Inline tube adapter ⌀64 mm to ⌀49 mm in STL format. Final length of this coupler is 65 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 64 | mm |
side A thickness | 4 | mm |
side B length | 25 | mm |
side B outer diameter | 49 | mm |
side B thickness | 3 | mm |
transition length | 15 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 80–70 mm (Length: 65 mm) (📦 #1263)
1 object(s) - format STL
Inline tube adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 80 | mm |
side A thickness | 4 | mm |
side B length | 25 | mm |
side B outer diameter | 70 | mm |
side B thickness | 4 | mm |
transition length | 10 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 68–53 mm (Length: 65 mm) (📦 #1233)
1 object(s) - format STL
Inline tube adapter ⌀68 mm to ⌀53 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 4 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 68 | mm |
side A thickness | 4 | mm |
side B length | 25 | mm |
side B outer diameter | 53 | mm |
side B thickness | 4 | mm |
transition length | 15 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 68–53 mm (Length: 65 mm) (📦 #1232)
1 object(s) - format STL
Tube reducer ⌀68 mm to ⌀53 mm in STL format. Total length of this adapter is 65 mm. The thickness of the larger diameter tube is 2 mm, and the smaller one is 4 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 68 | mm |
side A thickness | 2 | mm |
side B length | 25 | mm |
side B outer diameter | 53 | mm |
side B thickness | 4 | mm |
transition length | 15 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 68–52 mm (Length: 65 mm) (📦 #1231)
1 object(s) - format STL
Tube adapter ⌀68 mm to ⌀52 mm in STL format. Length of this coupler is 65 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 68 | mm |
side A thickness | 4 | mm |
side B length | 25 | mm |
side B outer diameter | 52 | mm |
side B thickness | 4 | mm |
transition length | 15 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 64–49 mm (Length: 63 mm) (📦 #1229)
1 object(s) - format STL
Tube reducer ⌀64 mm to ⌀49 mm in STL format. Final length of this fitting is 63 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 64 | mm |
side A thickness | 4 | mm |
side B length | 25 | mm |
side B outer diameter | 49 | mm |
side B thickness | 4 | mm |
transition length | 13 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Diameter adapter ⌀81 mm to ⌀55 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The ends feature an external fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 81 | mm |
side A thickness | 2.5 | mm |
side B length | 25 | mm |
side B outer diameter | 55 | mm |
side B thickness | 2.5 | mm |
transition length | 30 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 70–69 mm (Length: 50 mm) (📦 #1394)
1 object(s) - format STL
Tube adapter ⌀70 mm to ⌀69 mm in STL format. Total length of this adapter is 50 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 70 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 69 | mm |
side B thickness | 2 | mm |
transition length | 10 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 110–106 mm (Length: 35 mm) (📦 #1239)
1 object(s) - format STL
Straight tube reducer ⌀110 mm to ⌀106 mm in STL format. Total length of this sleeve is 35 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 110 | mm |
side A thickness | 3 | mm |
side B length | 10 | mm |
side B outer diameter | 106 | mm |
side B thickness | 3 | mm |
transition length | 5 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 60–40 mm (Length: 85 mm) (📦 #1123)
1 object(s) - format STL
Straight sleeve ⌀60 mm to ⌀40 mm in STL format. Total length of this reducer is 85 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
Parameter | Value | Unit |
---|---|---|
side A length | 40 | mm |
side A outer diameter | 60 | mm |
side A thickness | 3 | mm |
side B length | 40 | mm |
side B outer diameter | 40 | mm |
side B thickness | 3 | mm |
transition length | 5 | mm |
axis offset | 1 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 50–40 mm (Length: 45 mm ) (📦 #1094)
1 object(s) - format STL (5.0/5) 2 vote(s)
Inline tube junction ⌀50 to ⌀40 mm in STL format. Length of this connector is 45 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends have a fillet on the outside to make tube connection easier.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 50 | mm |
side A thickness | 4 | mm |
side B length | 20 | mm |
side B outer diameter | 40 | mm |
side B thickness | 3 | mm |
transition length | 5 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 95–90 mm (Length: 70 mm) (📦 #1397)
1 object(s) - format STL
Straight tube coupler ⌀95 mm to ⌀90 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 95 | mm |
side A thickness | 2 | mm |
side B length | 30 | mm |
side B outer diameter | 90 | mm |
side B thickness | 2 | mm |
transition length | 10 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 92–71 mm (Length: 90 mm) (📦 #1371)
1 object(s) - format STL
Straight tube coupler ⌀92 mm to ⌀71 mm in STL format. Total length of this connector is 90 mm. The thickness of the larger diameter tube is 3 mm, and the smaller one is 2 mm. The two axes of the tubes are offset. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 10 | mm |
side A outer diameter | 92 | mm |
side A thickness | 3 | mm |
side B length | 50 | mm |
side B outer diameter | 71 | mm |
side B thickness | 2 | mm |
transition length | 30 | mm |
axis offset | 9.1 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)
1 object(s) - format STL
Tube junction ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to ease the connection.
Parameter | Value | Unit |
---|---|---|
side A length | 45 | mm |
side A outer diameter | 80 | mm |
side A thickness | 2.5 | mm |
side B length | 45 | mm |
side B outer diameter | 75 | mm |
side B thickness | 2.5 | mm |
transition length | 10 | mm |
axis offset | 2.4 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)
1 object(s) - format STL
Tube connector ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to make tube connection easier.
Parameter | Value | Unit |
---|---|---|
side A length | 46 | mm |
side A outer diameter | 80 | mm |
side A thickness | 3 | mm |
side B length | 45 | mm |
side B outer diameter | 75 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 80–75 mm (Length: 101 mm) (📦 #1219)
1 object(s) - format STL
Diameter adapter ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 101 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to facilitate the connection of the two tubes.
Parameter | Value | Unit |
---|---|---|
side A length | 46 | mm |
side A outer diameter | 80 | mm |
side A thickness | 2.5 | mm |
side B length | 45 | mm |
side B outer diameter | 75 | mm |
side B thickness | 2.5 | mm |
transition length | 10 | mm |
axis offset | 2.4 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 94–90 mm (Length: 80 mm) (📦 #1391)
1 object(s) - format STL
Straight tube adapter ⌀94 mm to ⌀90 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet to make tube connection easier.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 94 | mm |
side A thickness | 2 | mm |
side B length | 30 | mm |
side B outer diameter | 90 | mm |
side B thickness | 2 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 86–81 mm (Length: 111 mm) (📦 #1215)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube junction ⌀86 mm to ⌀81 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to ease the connection.
Parameter | Value | Unit |
---|---|---|
side A length | 46 | mm |
side A outer diameter | 86 | mm |
side A thickness | 3 | mm |
side B length | 45 | mm |
side B outer diameter | 81 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)
1 object(s) - format STL
Inline fitting ⌀80 mm to ⌀75 mm in STL format. Total length of this sleeve is 111 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends have a fillet on the outside.
Parameter | Value | Unit |
---|---|---|
side A length | 46 | mm |
side A outer diameter | 80 | mm |
side A thickness | 2.5 | mm |
side B length | 45 | mm |
side B outer diameter | 75 | mm |
side B thickness | 2.5 | mm |
transition length | 20 | mm |
axis offset | 2.4 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 120–90 mm (Length: 75 mm) (📦 #1164)
1 object(s) - format STL
Inline tube coupler ⌀120 mm to ⌀90 mm in STL format. Final length of this connector is 75 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 120 | mm |
side A thickness | 4 | mm |
side B length | 30 | mm |
side B outer diameter | 90 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 60–45 mm (Length: 100 mm) (📦 #1228)
1 object(s) - format STL
Straight tube coupler ⌀60 mm to ⌀45 mm in STL format. Total length of this connector is 100 mm. The thickness of the tubes is identical: 4 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 50 | mm |
side A outer diameter | 60 | mm |
side A thickness | 4 | mm |
side B length | 30 | mm |
side B outer diameter | 45 | mm |
side B thickness | 4 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 69–65 mm (Length: 100 mm) (📦 #1393)
1 object(s) - format STL
Inline sleeve ⌀69 mm to ⌀65 mm in STL format. Total length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet to facilitate the connection of the two tubes.
Parameter | Value | Unit |
---|---|---|
side A length | 40 | mm |
side A outer diameter | 69 | mm |
side A thickness | 2 | mm |
side B length | 50 | mm |
side B outer diameter | 65 | mm |
side B thickness | 2 | mm |
transition length | 10 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 102–90 mm (Length: 80 mm) (📦 #1383)
1 object(s) - format STL
Straight tube reducer ⌀102 mm to ⌀90 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the outside to make tube connection easier.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 102 | mm |
side A thickness | 2 | mm |
side B length | 50 | mm |
side B outer diameter | 90 | mm |
side B thickness | 2 | mm |
transition length | 10 | mm |
axis offset | 0 | mm |
ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 30–26 mm (Length: 50 mm) (📦 #1109)
1 object(s) - format STL (3.0/5) 1 vote(s)
Inline tube adapter ⌀30 mm to ⌀26 mm in STL format. Final length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 15 | mm |
side A outer diameter | 30 | mm |
side A thickness | 2 | mm |
side B length | 30 | mm |
side B outer diameter | 26 | mm |
side B thickness | 2 | mm |
transition length | 5 | mm |
axis offset | 0 | mm |
ends fillet | 0 | 0,1,2,3 |