Custom Rectangular duct adapter STL 3D file 300x300 mm to 300x300 mm – transition: 50 mm 📦#10957

STL Download STL 1
Create a new model expert
from scratch search for a model
Rectangular duct adapter provided as 3D STL file. Both ends have the same internal cross-section, 300x300 mm, with a square shape. Each sleeve provides an insertion length of 50 mm. The transition section between the two sides is 50 mm long, for an overall length of 150 mm (side A sleeve, transition and side B sleeve). The wall is particularly robust, with 8 mm of material. Internal chamfers at the ends improve assembly and provide a smoother insertion of the mating duct.
Generation date: 2026-08-13
3D Model Rectangular duct adapter STL 3D file 300x300 mm to 300x300 mm – transition: 50 mm

3D model download

Free
  • rectangular-to-rectangular-duc_model10957-nb0_dd{id}.stl : 2.4 Ko
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Rectangular-to-rectangular duct adapter template, with the following values:
Parameter Value
#1 side A internal width 300 mm (≃11 13/16 in)
#2 side A internal height 300 mm (≃11 13/16 in)
#3 sleeve length on side A 50 mm (≃1.97 in)
#4 side B internal width 300 mm (≃11 13/16 in)
#5 side B internal height 300 mm (≃11 13/16 in)
#6 sleeve length on side B 50 mm (≃1.97 in)
#7 thickness 8 mm (≃5/16 in)
#8 transition length 50 mm (≃1.97 in)
#9 Y offset 0 mm (0 in)
#10 Z offset 0 mm (0 in)
#11 end chamfers inside
Metadata Value
external width on side A 316 mm (≃12 7/16 in)
external height on side A 316 mm (≃12 7/16 in)
external width on side B 316 mm (≃12 7/16 in)
external height on side B 316 mm (≃12 7/16 in)
total length 150 mm (≃5.91 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A internal width widRA
#2 side A internal height heiRA
#3 sleeve length on side A lenSA
#4 side B internal width widRB
#5 side B internal height heiRB
#6 sleeve length on side B lenSB
#7 thickness thi
#8 transition length tra
#9 Y offset ofsY
#10 Z offset ofsZ
#11 end chamfers cha

Related 3D models

To search for a model based on your own parameters, go to the template page Rectangular-to-rectangular duct adapter 

Rectangular duct adapter STL file 300x300 mm to 300x300 mm – transition: 20 mm (📦 #11001)

1 object(s) - format STL
Rectangular duct adapter STL file 300x300 mm to 300x300 mm – transition: 20 mm
3D STL file for rectangular pipe adapter. Both ends have the same internal cross-section, 300x300 mm, with a square shape. Both side A and side B sleeves share the same insertion length of 65 mm. The transition section between the two sides is 20 mm long, for an overall length of 150 mm (side A sleeve, transition and side B sleeve). The wall is relatively thick, at 5 mm. The ends are left without chamfers, with sharp inner and outer edges.
Parameter Value Unit
side A internal width 300 mm
side A internal height 300 mm
sleeve length on side A 65 mm
side B internal width 300 mm
side B internal height 300 mm
sleeve length on side B 65 mm
thickness 5 mm
transition length 20 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular pipe adapter STL 3D file 295x291 mm to 130x130 mm – transition: 25 mm (📦 #6175)

1 object(s) - format STL
Rectangular pipe adapter STL 3D file 295x291 mm to 130x130 mm – transition: 25 mm
Rectangular duct transition downloadable as STL 3D file. The internal cross-section on side A is 295x291 mm (rectangular), while side B is 130x130 mm (square). The sleeve insertion length is the same on both sides, 30 mm. Between the two sleeves, the transition section adds 25 mm, giving an overall length of 85 mm. The shell is thick, with a wall thickness of 5 mm. The ends are left without chamfers, with sharp inner and outer edges.
Parameter Value Unit
side A internal width 295 mm
side A internal height 291 mm
sleeve length on side A 30 mm
side B internal width 130 mm
side B internal height 130 mm
sleeve length on side B 30 mm
thickness 5 mm
transition length 25 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular tube adapter STL 3D file 60x284.4 mm to 161.9x191 mm – transition: 50 mm (📦 #9620)

1 object(s) - format STL
Rectangular tube adapter STL 3D file 60x284.4 mm to 161.9x191 mm – transition: 50 mm
3D STL file for rectangular conduit adapter. The internal cross-section on side A is 60x284.4 mm (rectangular), while side B is 161.9x191 mm (rectangular). On side A, the sleeve length is 5 mm, and on side B it is 33.5 mm. The transition section runs for 50 mm and the overall length is 88.5 mm, sleeves included. The shell is thick, with a wall thickness of 5 mm. The internal edges at the ends are chamfered to help guide the duct during insertion. Side B is offset by 25 mm along the Y axis relative to side A.
Parameter Value Unit
side A internal width 60 mm
side A internal height 284.4 mm
sleeve length on side A 5 mm
side B internal width 161.9 mm
side B internal height 191 mm
sleeve length on side B 33.5 mm
thickness 5 mm
transition length 50 mm
Y offset 25 mm
Z offset 0 mm
end chamfers inside

Rectangular tube adapter STL file 60x284.4 mm to 161.9x191 mm – transition: 50 mm (📦 #9619)

1 object(s) - format STL
Rectangular tube adapter STL file 60x284.4 mm to 161.9x191 mm – transition: 50 mm
Rectangular pipe adapter provided as 3D STL file. Side A offers an internal cross-section of 60x284.4 mm (rectangular) and side B uses 161.9x191 mm (rectangular). Each sleeve provides an insertion length of 5 mm. The transition section runs for 50 mm and the overall length is 60 mm, sleeves included. The wall is relatively thick, at 5 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier. An offset of 25 mm along the Y axis is applied to side B with respect to side A.
Parameter Value Unit
side A internal width 60 mm
side A internal height 284.4 mm
sleeve length on side A 5 mm
side B internal width 161.9 mm
side B internal height 191 mm
sleeve length on side B 5 mm
thickness 5 mm
transition length 50 mm
Y offset 25 mm
Z offset 0 mm
end chamfers inside

Rectangular pipe adapter STL file 203x203 mm to 203x203 mm – transition: 85 mm (📦 #12222)

1 object(s) - format STL
Rectangular pipe adapter STL file 203x203 mm to 203x203 mm – transition: 85 mm
Rectangular vent adapter exported as STL 3D file. Side A and side B share the same internal cross-section, 203x203 mm, with a square profile. The sleeve insertion length is the same on both sides, 30 mm. The transition section between the two sides is 85 mm long, for an overall length of 145 mm (side A sleeve, transition and side B sleeve). No chamfers are applied at the ends; both inner and outer edges remain sharp.
Parameter Value Unit
side A internal width 203 mm
side A internal height 203 mm
sleeve length on side A 30 mm
side B internal width 203 mm
side B internal height 203 mm
sleeve length on side B 30 mm
thickness 3 mm
transition length 85 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular duct adapter STL file 203.2x203.2 mm to 203.2x203.2 mm – transition: 60 mm (📦 #12208)

1 object(s) - format STL
Rectangular duct adapter STL file 203.2x203.2 mm to 203.2x203.2 mm – transition: 60 mm
Rectangular duct adapter exported as STL 3D file. Side A and side B share the same internal cross-section, 203.2x203.2 mm, with a square profile. The sleeve on side A provides an insertion length of 20 mm, and the sleeve on side B 30 mm. Between the two sleeves, the transition section adds 60 mm, giving an overall length of 110 mm. No chamfers are applied at the ends; both inner and outer edges remain sharp.
Parameter Value Unit
side A internal width 203.2 mm
side A internal height 203.2 mm
sleeve length on side A 20 mm
side B internal width 203.2 mm
side B internal height 203.2 mm
sleeve length on side B 30 mm
thickness 3 mm
transition length 60 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular pipe adapter STL 3D file 203x203 mm to 203x203 mm – transition: 55 mm (📦 #12200)

1 object(s) - format STL
Rectangular pipe adapter STL 3D file 203x203 mm to 203x203 mm – transition: 55 mm
Rectangular pipe adapter downloadable as STL 3D file. Both ends have the same internal cross-section, 203x203 mm, with a square shape. The sleeve on side A provides an insertion length of 10 mm, and the sleeve on side B 60 mm. Between the two sleeves, the transition section adds 55 mm, giving an overall length of 125 mm. No chamfers are applied at the ends; both inner and outer edges remain sharp.
Parameter Value Unit
side A internal width 203 mm
side A internal height 203 mm
sleeve length on side A 10 mm
side B internal width 203 mm
side B internal height 203 mm
sleeve length on side B 60 mm
thickness 3 mm
transition length 55 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangle-to-rectangle duct adapter STL file 220x90 mm to 220x55 mm – transition: 20 mm (📦 #10018)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL file 220x90 mm to 220x55 mm – transition: 20 mm
Rectangular duct adapter downloadable as STL 3D file. Side A uses an internal cross-section of 220x90 mm (rectangular), whereas side B is 220x55 mm (rectangular). The sleeve insertion length is the same on both sides, 30 mm. The transition section runs for 20 mm and the overall length is 80 mm, sleeves included. The shell is thick, with a wall thickness of 5 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.
Parameter Value Unit
side A internal width 220 mm
side A internal height 90 mm
sleeve length on side A 30 mm
side B internal width 220 mm
side B internal height 55 mm
sleeve length on side B 30 mm
thickness 5 mm
transition length 20 mm
Y offset 0 mm
Z offset 0 mm
end chamfers inside

Rectangle-to-rectangle duct adapter STL file 60x284.4 mm to 161.9x191 mm – transition: 50 mm (📦 #9631)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL file 60x284.4 mm to 161.9x191 mm – transition: 50 mm
Rectangular vent adapter exported as STL 3D file. The internal cross-section on side A is 60x284.4 mm (rectangular), while side B is 161.9x191 mm (rectangular). The insertion length on side A is 5 mm, while on side B it is 33.5 mm. The transition section between the two sides is 50 mm long, for an overall length of 88.5 mm (side A sleeve, transition and side B sleeve). The shell is thick, with a wall thickness of 4 mm. The internal edges at the ends are chamfered to help guide the duct during insertion. Relative to side A, side B is shifted by 25 mm along the Y axis.
Parameter Value Unit
side A internal width 60 mm
side A internal height 284.4 mm
sleeve length on side A 5 mm
side B internal width 161.9 mm
side B internal height 191 mm
sleeve length on side B 33.5 mm
thickness 4 mm
transition length 50 mm
Y offset 25 mm
Z offset 0 mm
end chamfers inside

Rectangle-to-rectangle duct adapter STL file 203.2x203.2 mm to 203.2x203.2 mm – transition: 58 mm (📦 #12120)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL file 203.2x203.2 mm to 203.2x203.2 mm – transition: 58 mm
Rectangular duct sleeve downloadable as STL 3D file. Side A and side B share the same internal cross-section, 203.2x203.2 mm, with a square profile. On side A, the sleeve length is 10 mm, and on side B it is 85 mm. The transition section runs for 58 mm and the overall length is 153 mm, sleeves included. Inner and outer edges at both ends are left unchamfered.
Parameter Value Unit
side A internal width 203.2 mm
side A internal height 203.2 mm
sleeve length on side A 10 mm
side B internal width 203.2 mm
side B internal height 203.2 mm
sleeve length on side B 85 mm
thickness 3 mm
transition length 58 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangle-to-rectangle duct adapter STL 3D file 90x90 mm to 200x90 mm – transition: 100 mm (📦 #3788)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL 3D file 90x90 mm to 200x90 mm – transition: 100 mm
Rectangular tube adapter exported as STL 3D file. Side A uses an internal cross-section of 90x90 mm (square), whereas side B is 200x90 mm (rectangular). The sleeve insertion length is the same on both sides, 40 mm. The transition section between the two sides is 100 mm long, for an overall length of 180 mm (side A sleeve, transition and side B sleeve). The shell is very thick, with 6 mm wall thickness. The internal edges at the ends are chamfered to help guide the duct during insertion. Side B is offset by 50 mm along the Y axis relative to side A.
Parameter Value Unit
side A internal width 90 mm
side A internal height 90 mm
sleeve length on side A 40 mm
side B internal width 200 mm
side B internal height 90 mm
sleeve length on side B 40 mm
thickness 6 mm
transition length 100 mm
Y offset 50 mm
Z offset 0 mm
end chamfers inside

Rectangle-to-rectangle duct adapter STL 3D file 200x200 mm to 56x56 mm – transition: 40 mm (📦 #5821)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL 3D file 200x200 mm to 56x56 mm – transition: 40 mm
3D STL file for rectangular tube adapter. Side A uses an internal cross-section of 200x200 mm (square), whereas side B is 56x56 mm (square). On side A, the sleeve length is 50 mm, and on side B it is 25 mm. The transition section runs for 40 mm and the overall length is 115 mm, sleeves included. Wall thickness is generous (4 mm). The internal edges at the ends are chamfered to help guide the duct during insertion.
Parameter Value Unit
side A internal width 200 mm
side A internal height 200 mm
sleeve length on side A 50 mm
side B internal width 56 mm
side B internal height 56 mm
sleeve length on side B 25 mm
thickness 4 mm
transition length 40 mm
Y offset 0 mm
Z offset 0 mm
end chamfers inside

Rectangle-to-rectangle duct adapter STL 3D file 220x90 mm to 180x95 mm – transition: 30 mm (📦 #3980)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL 3D file 220x90 mm to 180x95 mm – transition: 30 mm
3D STL file for rectangular adapter. Side A uses an internal cross-section of 220x90 mm (rectangular), whereas side B is 180x95 mm (rectangular). Both side A and side B sleeves share the same insertion length of 40 mm. The transition section between the two sides is 30 mm long, for an overall length of 110 mm (side A sleeve, transition and side B sleeve). Internal chamfers are added at the ends to make assembly and duct insertion easier.
Parameter Value Unit
side A internal width 220 mm
side A internal height 90 mm
sleeve length on side A 40 mm
side B internal width 180 mm
side B internal height 95 mm
sleeve length on side B 40 mm
thickness 3 mm
transition length 30 mm
Y offset 0 mm
Z offset 0 mm
end chamfers inside

Rectangular pipe adapter STL 3D file 171x32 mm to 210.2x209.9 mm – transition: 55 mm (📦 #12113)

1 object(s) - format STL
Rectangular pipe adapter STL 3D file 171x32 mm to 210.2x209.9 mm – transition: 55 mm
3D STL file for rectangular duct adapter. The internal cross-section on side A is 171x32 mm (rectangular), while side B is 210.2x209.9 mm (rectangular). The insertion length on side A is 50.8 mm, while on side B it is 31.8 mm. The transition section runs for 55 mm and the overall length is 137.6 mm, sleeves included. No chamfers are applied at the ends; both inner and outer edges remain sharp.
Parameter Value Unit
side A internal width 171 mm
side A internal height 32 mm
sleeve length on side A 50.8 mm
side B internal width 210.2 mm
side B internal height 209.9 mm
sleeve length on side B 31.8 mm
thickness 3 mm
transition length 55 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular duct adapter STL file 300x145 mm to 300x145 mm – transition: 85 mm (📦 #10917)

1 object(s) - format STL
Rectangular duct adapter STL file 300x145 mm to 300x145 mm – transition: 85 mm
3D STL file for rectangular adapter. Side A and side B share the same internal cross-section, 300x145 mm, with a rectangular profile. The sleeve insertion length is the same on both sides, 85 mm. The transition section between the two sides is 85 mm long, for an overall length of 255 mm (side A sleeve, transition and side B sleeve). Internal chamfers at the ends improve assembly and provide a smoother insertion of the mating duct.
Parameter Value Unit
side A internal width 300 mm
side A internal height 145 mm
sleeve length on side A 85 mm
side B internal width 300 mm
side B internal height 145 mm
sleeve length on side B 85 mm
thickness 2 mm
transition length 85 mm
Y offset 0 mm
Z offset 0 mm
end chamfers inside

Rectangle-to-rectangle duct adapter STL file 90x220 mm to 220x90 mm – transition: 140 mm (📦 #7029)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL file 90x220 mm to 220x90 mm – transition: 140 mm
Rectangular duct sleeve downloadable as STL 3D file. Side A offers an internal cross-section of 90x220 mm (rectangular) and side B uses 220x90 mm (rectangular). Each sleeve provides an insertion length of 40 mm. Between the two sleeves, the transition section adds 140 mm, giving an overall length of 220 mm. External chamfers are added at the ends to make it easier to push the adapter into ducts or pipes.
Parameter Value Unit
side A internal width 90 mm
side A internal height 220 mm
sleeve length on side A 40 mm
side B internal width 220 mm
side B internal height 90 mm
sleeve length on side B 40 mm
thickness 3 mm
transition length 140 mm
Y offset 0 mm
Z offset 0 mm
end chamfers outside

Rectangular pipe adapter STL file 220x90 mm to 220x90 mm – transition: 120 mm (📦 #11932)

1 object(s) - format STL
Rectangular pipe adapter STL file 220x90 mm to 220x90 mm – transition: 120 mm
Rectangular conduit adapter exported as STL 3D file. On both side A and side B, the internal cross-section is 220x90 mm, with a rectangular geometry. Both side A and side B sleeves share the same insertion length of 50 mm. The transition section between the two sides is 120 mm long, for an overall length of 220 mm (side A sleeve, transition and side B sleeve). No chamfers are applied at the ends; both inner and outer edges remain sharp.
Parameter Value Unit
side A internal width 220 mm
side A internal height 90 mm
sleeve length on side A 50 mm
side B internal width 220 mm
side B internal height 90 mm
sleeve length on side B 50 mm
thickness 3 mm
transition length 120 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular tube adapter STL file 210.9x210.9 mm to 168x31.7 mm – transition: 100 mm (📦 #12163)

1 object(s) - format STL
Rectangular tube adapter STL file 210.9x210.9 mm to 168x31.7 mm – transition: 100 mm
Rectangular duct adapter exported as STL 3D file. Side A uses an internal cross-section of 210.9x210.9 mm (square), whereas side B is 168x31.7 mm (rectangular). On side A, the sleeve length is 40 mm, and on side B it is 32 mm. The transition section runs for 100 mm and the overall length is 172 mm, sleeves included. The ends are left without chamfers, with sharp inner and outer edges.
Parameter Value Unit
side A internal width 210.9 mm
side A internal height 210.9 mm
sleeve length on side A 40 mm
side B internal width 168 mm
side B internal height 31.7 mm
sleeve length on side B 32 mm
thickness 3 mm
transition length 100 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular tube adapter STL 3D file 220x90 mm to 205x60 mm – transition: 50 mm (📦 #9685)

1 object(s) - format STL
Rectangular tube adapter STL 3D file 220x90 mm to 205x60 mm – transition: 50 mm
Rectangular duct transition exported as STL 3D file. The internal cross-section on side A is 220x90 mm (rectangular), while side B is 205x60 mm (rectangular). Each sleeve provides an insertion length of 40 mm. The transition section between the two sides is 50 mm long, for an overall length of 130 mm (side A sleeve, transition and side B sleeve). The internal edges at the ends are chamfered to help guide the duct during insertion.
Parameter Value Unit
side A internal width 220 mm
side A internal height 90 mm
sleeve length on side A 40 mm
side B internal width 205 mm
side B internal height 60 mm
sleeve length on side B 40 mm
thickness 3 mm
transition length 50 mm
Y offset 0 mm
Z offset 0 mm
end chamfers inside

Rectangle-to-rectangle duct adapter STL file 220x90 mm to 205x60 mm – transition: 50 mm (📦 #9709)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL file 220x90 mm to 205x60 mm – transition: 50 mm
Rectangular duct connector provided as 3D STL file. Side A uses an internal cross-section of 220x90 mm (rectangular), whereas side B is 205x60 mm (rectangular). Both side A and side B sleeves share the same insertion length of 40 mm. Between the two sleeves, the transition section adds 50 mm, giving an overall length of 130 mm. Internal chamfers at the ends improve assembly and provide a smoother insertion of the mating duct. Side B is offset by 15 mm along the Z axis relative to side A.
Parameter Value Unit
side A internal width 220 mm
side A internal height 90 mm
sleeve length on side A 40 mm
side B internal width 205 mm
side B internal height 60 mm
sleeve length on side B 40 mm
thickness 3 mm
transition length 50 mm
Y offset 0 mm
Z offset 15 mm
end chamfers inside

Rectangular duct adapter STL 3D file 200x90 mm to 80x80 mm – transition: 60 mm (📦 #3870)

1 object(s) - format STL (5.0/5) 1 vote(s)
Rectangular duct adapter STL 3D file 200x90 mm to 80x80 mm – transition: 60 mm
Rectangular duct sleeve downloadable as STL 3D file. The internal cross-section on side A is 200x90 mm (rectangular), while side B is 80x80 mm (square). The insertion length on side A is 40 mm, while on side B it is 30 mm. Between the two sleeves, the transition section adds 60 mm, giving an overall length of 130 mm. Wall thickness is generous (4 mm). The ends are left without chamfers, with sharp inner and outer edges.
Parameter Value Unit
side A internal width 200 mm
side A internal height 90 mm
sleeve length on side A 40 mm
side B internal width 80 mm
side B internal height 80 mm
sleeve length on side B 30 mm
thickness 4 mm
transition length 60 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular tube adapter STL 3D file 100x200 mm to 60x204 mm – transition: 40 mm (📦 #10511)

1 object(s) - format STL
Rectangular tube adapter STL 3D file 100x200 mm to 60x204 mm – transition: 40 mm
Rectangular duct transition provided as 3D STL file. Side A uses an internal cross-section of 100x200 mm (rectangular), whereas side B is 60x204 mm (rectangular). Both side A and side B sleeves share the same insertion length of 30 mm. Between the two sleeves, the transition section adds 40 mm, giving an overall length of 100 mm. No chamfers are applied at the ends; both inner and outer edges remain sharp. Relative to side A, side B is shifted by 20 mm along the Y axis and 20 mm along the Z axis.
Parameter Value Unit
side A internal width 100 mm
side A internal height 200 mm
sleeve length on side A 30 mm
side B internal width 60 mm
side B internal height 204 mm
sleeve length on side B 30 mm
thickness 3 mm
transition length 40 mm
Y offset 20 mm
Z offset 20 mm
end chamfers none