Washer, Flat gasket, Ring 3D Files - Inner diameter 50 to 100 mm | page 2
Model(s) 31 to 48 of 48
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 70 mm thickness: 2 mm (📦 #4104)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL 3D file format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀70 mm. The total thickness is 2 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 70 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 5 mm + fillets (📦 #8402)
1 object(s) - format STL
3D file of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 5 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 5 mm (📦 #8403)
1 object(s) - format STL
Download this 3D model of gasket / washer in STL file format. This part features an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 5 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 65.5 mm ⌀OD: 70.5 mm thickness: 6 mm + chamfers (📦 #8953)
1 object(s) - format STL
Download this model of washer / flat gasket in STL file format. This model has an inner diameter of ⌀65.5 mm and an outer diameter of ⌀70.5 mm. The part thickness is 6 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 65.5 | mm |
| outer diameter | 70.5 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 66 mm ⌀OD: 76 mm thickness: 5 mm (📦 #9940)
1 object(s) - format STL
Download this file of washer / flat gasket in STL format. This model has an inner diameter of ⌀66 mm and an outer diameter of ⌀76 mm. The total thickness is 5 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 66 | mm |
| outer diameter | 76 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)
1 object(s) - format STL (5.0/5) 1 vote(s)
File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 70 | mm |
| outer diameter | 86 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.9 | mm |
Washer / Flat Gasket STL file ⌀ID: 70.9 mm ⌀OD: 80.2 mm thickness: 15 mm (📦 #3719)
1 object(s) - format STL
File of gasket / washer in STL file format. This part features an internal diameter of ⌀70.9 mm and an external diameter of ⌀80.2 mm. The total thickness is 15 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 70.9 | mm |
| outer diameter | 80.2 | mm |
| thickness | 15 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 73 mm ⌀OD: 80 mm thickness: 20 mm + chamfers (📦 #8283)
1 object(s) - format STL
File of washer / flat gasket in STL format. This model features an inner diameter of ⌀73 mm and an outer diameter of ⌀80 mm. The total thickness is 20 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 73 | mm |
| outer diameter | 80 | mm |
| thickness | 20 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 76 mm ⌀OD: 77 mm thickness: 3 mm (📦 #5294)
1 object(s) - format STL
Download this model of washer / gasket in STL 3D file format. This part features an inner diameter of ⌀76 mm and an outer diameter of ⌀77 mm. The total thickness is 3 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 76 | mm |
| outer diameter | 77 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 76 mm ⌀OD: 86 mm thickness: 3 mm (📦 #9294)
1 object(s) - format STL
Model of flat gasket / washer in STL 3D file format. This model has an internal diameter of ⌀76 mm and an external diameter of ⌀86 mm. The thickness is 3 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 76 | mm |
| outer diameter | 86 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 118 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 99 mm thickness: 2 mm (📦 #9927)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀99 mm. The part thickness is 2 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 99 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 89 mm ⌀OD: 100 mm thickness: 1.5 mm (📦 #9930)
1 object(s) - format STL
Model of washer / gasket in STL format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀100 mm. The total thickness is 1.5 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 100 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 90 mm ⌀OD: 120 mm thickness: 15 mm (📦 #2355)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL 3D file format. This model has an internal diameter of ⌀90 mm and an external diameter of ⌀120 mm. The thickness is 15 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 90 | mm |
| outer diameter | 120 | mm |
| thickness | 15 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 90 mm ⌀OD: 150 mm thickness: 15 mm + chamfers (📦 #2356)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀90 mm and an outer diameter of ⌀150 mm. The total thickness is 15 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 90 | mm |
| outer diameter | 150 | mm |
| thickness | 15 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 90 mm ⌀OD: 100 mm thickness: 1.5 mm (📦 #4830)
1 object(s) - format STL
Download this file of gasket / washer in STL file format. This model has an internal diameter of ⌀90 mm and an external diameter of ⌀100 mm. The part thickness is 1.5 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 90 | mm |
| outer diameter | 100 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 91 mm ⌀OD: 95 mm thickness: 3 mm (📦 #8968)
1 object(s) - format STL
Download this file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀91 mm and an external diameter of ⌀95 mm. The part thickness is 3 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 91 | mm |
| outer diameter | 95 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 98 mm ⌀OD: 100 mm thickness: 5 mm (📦 #4360)
1 object(s) - format STL
Download this 3D file of washer / flat gasket in STL format. This part features an internal diameter of ⌀98 mm and an external diameter of ⌀100 mm. The total thickness is 5 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 98 | mm |
| outer diameter | 100 | mm |
| thickness | 5 | mm |
| finish | none |
Can't find the right model?
Create it with your specs