?>

Round air vent grill 3D Files - Male diameter 100 to 150 mm | page 2

Model(s) 31 to 55 of 55

Round air vent STL file ∅ 120 mm, slat angle: 45° with central reinforcement (📦 #1333)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL file ∅ 120 mm, slat angle: 45° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its male diameter measures 120 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This 3D vent cover has a thin flange of 5 mm. The overall diameter of the model is 130 mm.
Parameter Value Unit
male diameter 120 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 120 mm, slat angle: 35° (📦 #1786)

1 object(s) - format STL
Round air vent STL file ∅ 120 mm, slat angle: 35°
Model of a round grille for ventilation in STL format. Its insertion diameter is 120 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This 3D ventilation grille has no flange.
Parameter Value Unit
male diameter 120 mm
slat angle 35 °
slat thickness 1.6 mm
flange width 0 mm
central reinforcement no

Round air vent STL 3D file ∅ 120 mm, slat angle: 10° with central reinforcement (📦 #3850)

1 object(s) - format STL
Round air vent STL 3D file ∅ 120 mm, slat angle: 10° with central reinforcement
3D model of a round grille for ventilation in STL format. Its insertion diameter is 120 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This 3D aeration grille has a thin flange of 5 mm. The total diameter of this model is 130 mm.
Parameter Value Unit
male diameter 120 mm
slat angle 10 °
slat thickness 2 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 120 mm, slat angle: 50° with central reinforcement (📦 #3866)

1 object(s) - format STL
Round air vent STL file ∅ 120 mm, slat angle: 50° with central reinforcement
3D design of a round vent cover for ventilation in STL format. Its male diameter is 120 mm. The slats have a steep angle of 50° and a low thickness of 1.4 mm. A central reinforcement secures the whole structure. This ventilation grille has a prominent flange of 13 mm. The overall diameter of this model is 146 mm.
Parameter Value Unit
male diameter 120 mm
slat angle 50 °
slat thickness 1.4 mm
flange width 13 mm
central reinforcement yes

Round air vent STL 3D file ∅ 122 mm, slat angle: 40° (📦 #1790)

1 object(s) - format STL
Round air vent STL 3D file ∅ 122 mm, slat angle: 40°
3D model of a round vent cover for air circulation in STL format. Its insertion diameter is 122 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This aeration grille features a collar of 10 mm. The total diameter of this model is 142 mm.
Parameter Value Unit
male diameter 122 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement no

Round air vent STL file ∅ 122 mm, slat angle: 30° (📦 #1794)

1 object(s) - format STL
Round air vent STL file ∅ 122 mm, slat angle: 30°
File of a round air vent for ventilation in STL format. Its insertion diameter measures 122 mm. The slats have a slight angle of 30° and a high thickness of 1.8 mm. This 3D ventilation grille has a prominent flange of 16 mm. The full diameter of this model is 154 mm.
Parameter Value Unit
male diameter 122 mm
slat angle 30 °
slat thickness 1.8 mm
flange width 16 mm
central reinforcement no

Round air vent STL file ∅ 123 mm, slat angle: 60° (📦 #1689)

1 object(s) - format STL
Round air vent STL file ∅ 123 mm, slat angle: 60°
Design of a round vent cover for ventilation in STL format. Its male diameter is 123 mm. The slats have a steep angle of 60° and a high thickness of 2.4 mm. This 3D vent grille has a prominent flange of 20 mm. The overall diameter of the model is 163 mm.
Parameter Value Unit
male diameter 123 mm
slat angle 60 °
slat thickness 2.4 mm
flange width 20 mm
central reinforcement no

Round air vent STL file ∅ 123 mm, slat angle: 45° with central reinforcement (📦 #1993)

1 object(s) - format STL
Round air vent STL file ∅ 123 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its male diameter is 123 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This aeration grille has a prominent flange of 20 mm. The total diameter of the model is 163 mm.
Parameter Value Unit
male diameter 123 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 123 mm, slat angle: 45° with central reinforcement (📦 #3583)

1 object(s) - format STL
Round air vent STL 3D file ∅ 123 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its male diameter is 123 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement strengthens the whole structure. This aeration grille has a prominent flange of 15 mm. The overall diameter of the model is 153 mm.
Parameter Value Unit
male diameter 123 mm
slat angle 45 °
slat thickness 2 mm
flange width 15 mm
central reinforcement yes

Round air vent STL 3D file ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #1464)

1 object(s) - format STL
Round air vent STL 3D file ∅ 125 mm, slat angle: 45° with central reinforcement
Model of a round air vent for ventilation in STL format. Its insertion diameter measures 125 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the slats. This 3D vent grille has a collar of 10 mm. The full diameter of the model is 145 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #1773)

1 object(s) - format STL
Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter is 125 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A central reinforcement reinforces the slats. This 3D vent grille has a prominent flange of 20 mm. The overall diameter of this model is 165 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 125 mm, slat angle: 35° (📦 #1785)

1 object(s) - format STL
Round air vent STL file ∅ 125 mm, slat angle: 35°
File of a round air vent for ventilation in STL format. Its insertion diameter measures 125 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This aeration grille features no flange.
Parameter Value Unit
male diameter 125 mm
slat angle 35 °
slat thickness 1.6 mm
flange width 0 mm
central reinforcement no

Round air vent STL 3D file ∅ 125 mm, slat angle: 30° (📦 #2764)

1 object(s) - format STL
Round air vent STL 3D file ∅ 125 mm, slat angle: 30°
3D file of a round air vent for ventilation in STL format. Its male diameter is 125 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This 3D vent cover features a thin flange of 5 mm. The overall diameter of this model is 135 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #3060)

1 object(s) - format STL
Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its male diameter measures 125 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement secures the slats. This 3D vent cover has a thin flange of 3 mm. The total diameter of the model is 131 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 45 °
slat thickness 2 mm
flange width 3 mm
central reinforcement yes

Round air vent STL file ∅ 125 mm, slat angle: 35° (📦 #3978)

1 object(s) - format STL
Round air vent STL file ∅ 125 mm, slat angle: 35°
Model of a round vent cover for ventilation in STL format. Its male diameter is 125 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This vent cover features a prominent flange of 20 mm. The total diameter of this model is 165 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 35 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement no

Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement (📦 #1989)

1 object(s) - format STL
Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement
Model of a round air vent for air circulation in STL format. Its insertion diameter measures 125.2 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the slats. This vent cover has a prominent flange of 20 mm. The full diameter of the model is 165.2 mm.
Parameter Value Unit
male diameter 125.2 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 127 mm, slat angle: 45° with central reinforcement (📦 #1415)

1 object(s) - format STL
Round air vent STL file ∅ 127 mm, slat angle: 45° with central reinforcement
Model of a round air vent for ventilation in STL format. Its male diameter is 127 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A centered vertical reinforcement strengthens the slats. This ventilation grille has a prominent flange of 20 mm. The overall diameter of the model is 167 mm.
Parameter Value Unit
male diameter 127 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 127.0 mm, slat angle: 30° with central reinforcement (📦 #3734)

1 object(s) - format STL
Round air vent STL 3D file ∅ 127.0 mm, slat angle: 30° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 127.0 mm. The slats have a slight angle of 30° and a high thickness of 2.0 mm. A vertical reinforcement strengthens the slats. This aeration grille has a prominent flange of 20 mm. The overall diameter of this model is 167 mm.
Parameter Value Unit
male diameter 127.0 mm
slat angle 30 °
slat thickness 2.0 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 135 mm, slat angle: 60° with central reinforcement (📦 #1687)

1 object(s) - format STL
Round air vent STL 3D file ∅ 135 mm, slat angle: 60° with central reinforcement
Design of a round grille for air circulation in STL format. Its male diameter measures 135 mm. The slats have a steep angle of 60° and a high thickness of 2.4 mm. A centered vertical reinforcement secures the slats. This 3D vent grille has a collar of 10 mm. The overall diameter of this model is 155 mm.
Parameter Value Unit
male diameter 135 mm
slat angle 60 °
slat thickness 2.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 140 mm, slat angle: 15° with central reinforcement (📦 #1296)

1 object(s) - format STL
Round air vent STL 3D file ∅ 140 mm, slat angle: 15° with central reinforcement
File of a round vent cover for air circulation in STL format. Its insertion diameter is 140 mm. The slats have a slight angle of 15° and a low thickness of 1.6 mm. A central reinforcement reinforces the whole structure. This 3D vent cover has a collar of 6 mm. The full diameter of this model is 152 mm.
Parameter Value Unit
male diameter 140 mm
slat angle 15 °
slat thickness 1.6 mm
flange width 6 mm
central reinforcement yes

Round air vent STL file ∅ 145 mm, slat angle: 45° with central reinforcement (📦 #2493)

1 object(s) - format STL
Round air vent STL file ∅ 145 mm, slat angle: 45° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its male diameter measures 145 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the slats. This 3D ventilation grille has a prominent flange of 20 mm. The total diameter of this model is 185 mm.
Parameter Value Unit
male diameter 145 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 145 mm, slat angle: 10° with central reinforcement (📦 #3669)

1 object(s) - format STL
Round air vent STL file ∅ 145 mm, slat angle: 10° with central reinforcement
3D design of a round grille for ventilation in STL format. Its male diameter is 145 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille has a flange of 10 mm. The overall diameter of the model is 165 mm.
Parameter Value Unit
male diameter 145 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 146 mm, slat angle: 60° with central reinforcement (📦 #3063)

1 object(s) - format STL
Round air vent STL file ∅ 146 mm, slat angle: 60° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its male diameter measures 146 mm. The slats have a steep angle of 60° and a low thickness of 1.4 mm. A centered vertical reinforcement secures the whole structure. This 3D vent cover has a flange of 8 mm. The overall diameter of this model is 162 mm.
Parameter Value Unit
male diameter 146 mm
slat angle 60 °
slat thickness 1.4 mm
flange width 8 mm
central reinforcement yes

Round air vent STL 3D file ∅ 146 mm, slat angle: 45° with central reinforcement (📦 #3064)

1 object(s) - format STL
Round air vent STL 3D file ∅ 146 mm, slat angle: 45° with central reinforcement
3D design of a round grille for air circulation in STL format. Its male diameter is 146 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A centered vertical reinforcement secures the slats. This aeration grille features a collar of 8 mm. The total diameter of the model is 162 mm.
Parameter Value Unit
male diameter 146 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 8 mm
central reinforcement yes

Round air vent STL file ∅ 146 mm, slat angle: 30° with central reinforcement (📦 #3065)

1 object(s) - format STL
Round air vent STL file ∅ 146 mm, slat angle: 30° with central reinforcement
Design of a round grille for air circulation in STL format. Its insertion diameter measures 146 mm. The slats have a slight angle of 30° and a low thickness of 1.4 mm. A centered vertical reinforcement secures the whole structure. This 3D vent grille has a flange of 8 mm. The total diameter of this model is 162 mm.
Parameter Value Unit
male diameter 146 mm
slat angle 30 °
slat thickness 1.4 mm
flange width 8 mm
central reinforcement yes
Can't find the right model? Create it with your specs