?>

L-bracket 3D Files - Length 150 to 200 mm

18 Model(s)

L-bracket 150×200 mm STL file, thickness 8 mm, hole diameter 6 mm (📦 #2187)

1 object(s) - format STL
L-bracket 150×200 mm STL file, thickness 8 mm, hole diameter 6 mm
Model of a support bracket reinforced in STL format. The dimensions are 150 mm in length, 200 mm in height, 30 mm in width, and 8 mm in thickness. The holes have a diameter of 6 mm. Chamfers are done to the holes for a cleaner fit of the screws. The reinforcing bar improves rigidity and includes two clearances for screwdriver access. This bracket prints without support, printed flat on the print bed.
Parameter Value Unit
length 150 mm
height 200 mm
width 30 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 150×100 mm STL 3D file, thickness 12 mm, hole diameter 6 mm (📦 #2315)

1 object(s) - format STL
Shelf bracket 150×100 mm STL 3D file, thickness 12 mm, hole diameter 6 mm
Model of a right-angle bracket with a central reinforcing bar in STL format. The dimensions are 150 mm in length, 100 mm in height, 14 mm in width, and 12 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are done to the holes to improve the seating of the heads. The central reinforcement bar reduces bending and includes two openings for fastening. No support is needed to print this bracket, lying flat on the build plate.
Parameter Value Unit
length 150 mm
height 100 mm
width 14 mm
thickness 12 mm
hole diameter 6 mm
chamfer on the holes yes

L-bracket 150×200 mm STL 3D file, thickness 10 mm, hole diameter 5 mm (📦 #2336)

1 object(s) - format STL
L-bracket 150×200 mm STL 3D file, thickness 10 mm, hole diameter 5 mm
3D model of a mounting bracket with a central reinforcing bar in STL 3D format. The dimensions are 150 mm in length, 200 mm in height, 50 mm in width, and 10 mm in thickness. The mounting holes are designed with a diameter of 5 mm. Chamfers are done to the holes to improve the seating of the heads. The reinforcing bar enhances mechanical strength and provides two openings for fastening. No support is needed to print this bracket, lying flat on the print bed.
Parameter Value Unit
length 150 mm
height 200 mm
width 50 mm
thickness 10 mm
hole diameter 5 mm
chamfer on the holes yes

Corner bracket 150×130 mm STL 3D file, thickness 6 mm, hole diameter 5 mm (📦 #2412)

1 object(s) - format STL
Corner bracket 150×130 mm STL 3D file, thickness 6 mm, hole diameter 5 mm
3D file of an angle bracket with reinforcement in STL format. The dimensions are 150 mm in length, 130 mm in height, 30 mm in width, and 6 mm in thickness. The drill holes have a diameter of 5 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar improves rigidity and provides two clearances for fastening. No support is needed to print this bracket, placed flat directly on the build plate.
Parameter Value Unit
length 150 mm
height 130 mm
width 30 mm
thickness 6 mm
hole diameter 5 mm
chamfer on the holes yes

Angle bracket 150×150 mm STL 3D file, thickness 12 mm, hole diameter 6 mm (📦 #2453)

1 object(s) - format STL
Angle bracket 150×150 mm STL 3D file, thickness 12 mm, hole diameter 6 mm
Download this model of a mounting bracket with reinforcement in STL format. The dimensions are 150 mm in length, 150 mm in height, 24 mm in width, and 12 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are done to the holes to improve the seating of the heads. The reinforcing bar enhances mechanical strength and provides two openings for screwdriver access. This bracket prints without support, printed flat directly on the build plate.
Parameter Value Unit
length 150 mm
height 150 mm
width 24 mm
thickness 12 mm
hole diameter 6 mm
chamfer on the holes yes

L-bracket 150×110 mm STL 3D file, thickness 8 mm, hole diameter 6 mm (📦 #2520)

1 object(s) - format STL
L-bracket 150×110 mm STL 3D file, thickness 8 mm, hole diameter 6 mm
Model of a corner bracket reinforced in STL format. The dimensions are 150 mm in length, 110 mm in height, 50 mm in width, and 8 mm in thickness. The screw holes have a diameter of 6 mm. Chamfers are applied to the holes to improve the seating of the heads. The reinforcing bar enhances mechanical strength and includes two openings for fastening. This bracket prints without support, placed flat on the build plate.
Parameter Value Unit
length 150 mm
height 110 mm
width 50 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Angle bracket 150×100 mm STL file, thickness 7 mm, hole diameter 5 mm (📦 #2563)

1 object(s) - format STL
Angle bracket 150×100 mm STL file, thickness 7 mm, hole diameter 5 mm
3D file of a right-angle bracket reinforced in STL format. The dimensions are 150 mm in length, 100 mm in height, 15 mm in width, and 7 mm in thickness. The drill holes have a diameter of 5 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The central reinforcement bar reduces bending and provides two clearances for fastening. This bracket prints without support, printed flat on the build plate.
Parameter Value Unit
length 150 mm
height 100 mm
width 15 mm
thickness 7 mm
hole diameter 5 mm
chamfer on the holes yes

Right-angle bracket 150×150 mm STL 3D file, thickness 12 mm, hole diameter 8 mm (📦 #2630)

1 object(s) - format STL
Right-angle bracket 150×150 mm STL 3D file, thickness 12 mm, hole diameter 8 mm
Download this model of an angle bracket with a central reinforcing bar in STL 3D format. The dimensions are 150 mm in length, 150 mm in height, 30 mm in width, and 12 mm in thickness. The drill holes have a diameter of 8 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar reduces bending and provides two clearances for screwdriver access. Support generation is not required for printing this bracket, printed flat on the build plate.
Parameter Value Unit
length 150 mm
height 150 mm
width 30 mm
thickness 12 mm
hole diameter 8 mm
chamfer on the holes yes

Right-angle bracket 150×100 mm STL 3D file, thickness 10 mm, hole diameter 6 mm (📦 #2631)

1 object(s) - format STL
Right-angle bracket 150×100 mm STL 3D file, thickness 10 mm, hole diameter 6 mm
Download this file of a mounting bracket with a central reinforcement in STL 3D format. The dimensions are 150 mm in length, 100 mm in height, 25 mm in width, and 10 mm in thickness. The mounting holes have a diameter of 6 mm. Chamfers are applied to the holes to seat the screw heads. The central reinforcement bar enhances mechanical strength and includes two passages for screwdriver access. No support is needed to print this bracket, lying flat on the print bed.
Parameter Value Unit
length 150 mm
height 100 mm
width 25 mm
thickness 10 mm
hole diameter 6 mm
chamfer on the holes yes

Support bracket 150×100 mm STL file, thickness 10 mm, hole diameter 6 mm (📦 #2793)

1 object(s) - format STL
Support bracket 150×100 mm STL file, thickness 10 mm, hole diameter 6 mm
File of a corner bracket with a central reinforcing bar in STL 3D format. The dimensions are 150 mm in length, 100 mm in height, 40 mm in width, and 10 mm in thickness. The mounting holes are designed with a diameter of 6 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar enhances mechanical strength and provides two clearances for fastening. No support is needed to print this bracket, printed flat on the print bed.
Parameter Value Unit
length 150 mm
height 100 mm
width 40 mm
thickness 10 mm
hole diameter 6 mm
chamfer on the holes yes

Mounting bracket 152×152 mm STL file, thickness 9 mm, hole diameter 5 mm (📦 #2661)

1 object(s) - format STL
Mounting bracket 152×152 mm STL file, thickness 9 mm, hole diameter 5 mm
Download this 3D file of a mounting bracket with a central reinforcement in STL 3D format. The dimensions are 152 mm in length, 152 mm in height, 26 mm in width, and 9 mm in thickness. The drill holes are designed with a diameter of 5 mm. Chamfers are applied to the holes to improve the seating of the heads. The central reinforcement bar improves rigidity and provides two openings for screwdriver access. This bracket prints without support, printed flat on the print bed.
Parameter Value Unit
length 152 mm
height 152 mm
width 26 mm
thickness 9 mm
hole diameter 5 mm
chamfer on the holes yes

Angle bracket 152×152 mm STL file, thickness 9 mm, hole diameter 5 mm (📦 #2730)

1 object(s) - format STL
Angle bracket 152×152 mm STL file, thickness 9 mm, hole diameter 5 mm
Download this 3D model of a support bracket with a central reinforcement in STL 3D format. The dimensions are 152 mm in length, 152 mm in height, 19 mm in width, and 9 mm in thickness. The mounting holes have a diameter of 5 mm. Chamfers are done to the holes to seat the screw heads. The central reinforcement bar enhances mechanical strength and includes two passages for fastening. Support generation is not required for printing this bracket, placed flat on the print bed.
Parameter Value Unit
length 152 mm
height 152 mm
width 19 mm
thickness 9 mm
hole diameter 5 mm
chamfer on the holes yes

Shelf bracket 153×203 mm STL 3D file, thickness 7 mm, hole diameter 6 mm (📦 #2331)

1 object(s) - format STL
Shelf bracket 153×203 mm STL 3D file, thickness 7 mm, hole diameter 6 mm
3D file of an angle bracket with a central reinforcement in STL format. The dimensions are 153 mm in length, 203 mm in height, 25 mm in width, and 7 mm in thickness. The drill holes have a diameter of 6 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The reinforcing bar enhances mechanical strength and includes two clearances for screwdriver access. This bracket prints without support, placed flat on the build plate.
Parameter Value Unit
length 153 mm
height 203 mm
width 25 mm
thickness 7 mm
hole diameter 6 mm
chamfer on the holes yes

Mounting bracket 155×155 mm STL file, thickness 5 mm, hole diameter 6 mm (📦 #2638)

1 object(s) - format STL
Mounting bracket 155×155 mm STL file, thickness 5 mm, hole diameter 6 mm
Download this 3D file of an angle bracket reinforced in STL 3D format. The dimensions are 155 mm in length, 155 mm in height, 24 mm in width, and 5 mm in thickness. The screw holes have a diameter of 6 mm. Chamfers are applied to the holes to seat the screw heads. The reinforcing bar reduces bending and provides two clearances for screwdriver access. Support generation is not required for printing this bracket, placed flat on the build plate.
Parameter Value Unit
length 155 mm
height 155 mm
width 24 mm
thickness 5 mm
hole diameter 6 mm
chamfer on the holes yes

Right-angle bracket 170×110 mm STL file, thickness 8 mm, hole diameter 6 mm (📦 #2518)

1 object(s) - format STL
Right-angle bracket 170×110 mm STL file, thickness 8 mm, hole diameter 6 mm
3D file of a right-angle bracket with a central reinforcing bar in STL format. The dimensions are 170 mm in length, 110 mm in height, 50 mm in width, and 8 mm in thickness. The mounting holes are designed with a diameter of 6 mm. Chamfers are done to the holes to seat the screw heads. The central reinforcement bar reduces bending and includes two passages for fastening. This bracket prints without support, printed flat directly on the build plate.
Parameter Value Unit
length 170 mm
height 110 mm
width 50 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Angle bracket 170×170 mm STL file, thickness 8 mm, hole diameter 5 mm (📦 #2749)

1 object(s) - format STL
Angle bracket 170×170 mm STL file, thickness 8 mm, hole diameter 5 mm
File of a mounting bracket reinforced in STL format. The dimensions are 170 mm in length, 170 mm in height, 35 mm in width, and 8 mm in thickness. The mounting holes have a diameter of 5 mm. Chamfers are done to the holes to improve the seating of the heads. The central reinforcement bar reduces bending and includes two openings for fastening. This bracket prints without support, placed flat on the print bed.
Parameter Value Unit
length 170 mm
height 170 mm
width 35 mm
thickness 8 mm
hole diameter 5 mm
chamfer on the holes yes

Corner bracket 170×170 mm STL 3D file, thickness 5 mm, hole diameter 5 mm (📦 #2798)

1 object(s) - format STL
Corner bracket 170×170 mm STL 3D file, thickness 5 mm, hole diameter 5 mm
3D file of a corner bracket with a central reinforcement in STL format. The dimensions are 170 mm in length, 170 mm in height, 35 mm in width, and 5 mm in thickness. The holes have a diameter of 5 mm. Chamfers are done to the holes for a cleaner fit of the screws. The reinforcing bar enhances mechanical strength and provides two openings for fastening. No support is needed to print this bracket, lying flat on the build plate.
Parameter Value Unit
length 170 mm
height 170 mm
width 35 mm
thickness 5 mm
hole diameter 5 mm
chamfer on the holes yes

Right-angle bracket 180×180 mm STL file, thickness 5 mm, hole diameter 5 mm (📦 #2803)

1 object(s) - format STL
Right-angle bracket 180×180 mm STL file, thickness 5 mm, hole diameter 5 mm
Download this 3D model of an angle bracket with a central reinforcement in STL 3D format. The dimensions are 180 mm in length, 180 mm in height, 50 mm in width, and 5 mm in thickness. The mounting holes are designed with a diameter of 5 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The reinforcing bar improves rigidity and includes two openings for screwdriver access. This bracket prints without support, lying flat directly on the build plate.
Parameter Value Unit
length 180 mm
height 180 mm
width 50 mm
thickness 5 mm
hole diameter 5 mm
chamfer on the holes yes
Can't find the right model? Create it with your parameters