Washer, Flat gasket, Ring 3D Files - Inner diameter 0.1 to 30 mm | page 7
Model(s) 181 to 197 of 197
Washer / Flat Gasket STL file ⌀ID: 25 mm ⌀OD: 30 mm thickness: 9 mm + chamfers (📦 #8583)
1 object(s) - format STL
3D file of washer / flat gasket in STL format. This part has an inner diameter of ⌀25 mm and an outer diameter of ⌀30 mm. The part thickness is 9 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.3 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25 | mm |
| outer diameter | 30 | mm |
| thickness | 9 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 25.5 mm ⌀OD: 49.5 mm thickness: 20 mm (📦 #6562)
1 object(s) - format STL
3D file of washer / flat gasket in STL format. This part has an internal diameter of ⌀25.5 mm and an external diameter of ⌀49.5 mm. The total thickness is 20 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25.5 | mm |
| outer diameter | 49.5 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 25.5 mm ⌀OD: 34.8 mm thickness: 20 mm (📦 #6567)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL format. This part has an internal diameter of ⌀25.5 mm and an external diameter of ⌀34.8 mm. The total thickness is 20 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25.5 | mm |
| outer diameter | 34.8 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 25.5 mm ⌀OD: 34 mm thickness: 20 mm (📦 #6568)
1 object(s) - format STL
3D model of washer / flat gasket in STL 3D file format. This model features an inner diameter of ⌀25.5 mm and an outer diameter of ⌀34 mm. The total thickness is 20 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25.5 | mm |
| outer diameter | 34 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 25.5 mm ⌀OD: 34.2 mm thickness: 20 mm (📦 #6570)
1 object(s) - format STL
3D file of washer / flat gasket in STL 3D file format. This part features an internal diameter of ⌀25.5 mm and an external diameter of ⌀34.2 mm. The total thickness is 20 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25.5 | mm |
| outer diameter | 34.2 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 25.5 mm ⌀OD: 34.4 mm thickness: 20 mm (📦 #6575)
1 object(s) - format STL
3D model of washer / gasket in STL file format. This part has an inner diameter of ⌀25.5 mm and an outer diameter of ⌀34.4 mm. The thickness is 20 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25.5 | mm |
| outer diameter | 34.4 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 25.5 mm ⌀OD: 34.6 mm thickness: 20 mm (📦 #6576)
1 object(s) - format STL
3D model of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀25.5 mm and an outer diameter of ⌀34.6 mm. The total thickness is 20 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25.5 | mm |
| outer diameter | 34.6 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 25.5 mm ⌀OD: 34.5 mm thickness: 20 mm (📦 #6577)
1 object(s) - format STL
Download this model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀25.5 mm and an outer diameter of ⌀34.5 mm. The total thickness is 20 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25.5 | mm |
| outer diameter | 34.5 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 8 mm + chamfers (📦 #1700)
1 object(s) - format STL (5.0/5) 2 vote(s)
File of gasket / washer in STL format. This part has an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 8 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 12 mm + chamfers (📦 #1701)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 12 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 12 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 16 mm + chamfers (📦 #1702)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 16 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 16 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 26.2 mm ⌀OD: 300 mm thickness: 6 mm (📦 #3625)
1 object(s) - format STL
3D model of flat gasket / washer in STL format. This model has an internal diameter of ⌀26.2 mm and an external diameter of ⌀300 mm. The total thickness is 6 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26.2 | mm |
| outer diameter | 300 | mm |
| thickness | 6 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 27 mm ⌀OD: 37 mm thickness: 1 mm + chamfers (📦 #3268)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this file of washer / flat gasket in STL format. This model has an inner diameter of ⌀27 mm and an outer diameter of ⌀37 mm. The total thickness is 1 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.4 mm. These finishes are applied on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 27 | mm |
| outer diameter | 37 | mm |
| thickness | 1 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL file ⌀ID: 28 mm ⌀OD: 50 mm thickness: 1.4 mm (📦 #3768)
1 object(s) - format STL
3D model of washer / flat gasket in STL 3D file format. This model has an inner diameter of ⌀28 mm and an outer diameter of ⌀50 mm. The part thickness is 1.4 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 28 | mm |
| outer diameter | 50 | mm |
| thickness | 1.4 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 28 mm ⌀OD: 75 mm thickness: 1.0 mm (📦 #3819)
1 object(s) - format STL
Model of washer / gasket in STL file format. This model has an internal diameter of ⌀28 mm and an external diameter of ⌀75 mm. The total thickness is 1.0 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 28 | mm |
| outer diameter | 75 | mm |
| thickness | 1.0 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 28 mm ⌀OD: 33 mm thickness: 3 mm (📦 #8288)
1 object(s) - format STL
Model of gasket / washer in STL file format. This part features an inner diameter of ⌀28 mm and an outer diameter of ⌀33 mm. The part thickness is 3 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 28 | mm |
| outer diameter | 33 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 28 mm ⌀OD: 35 mm thickness: 19 mm (📦 #10535)
1 object(s) - format STL
3D model of gasket / washer in STL file format. This model has an inner diameter of ⌀28 mm and an outer diameter of ⌀35 mm. The total thickness is 19 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 28 | mm |
| outer diameter | 35 | mm |
| thickness | 19 | mm |
| finish | none |
Can't find the right model?
Create it with your specs