L-bracket 3D Files - Length 100 to 130 mm | page 3

Model(s) 61 to 64 of 64

Mounting bracket 120×100 mm STL file, thickness 6 mm, hole diameter 6 mm (📦 #8581)

1 object(s) - format STL
Mounting bracket 120×100 mm STL file, thickness 6 mm, hole diameter 6 mm
3D file of a mounting bracket with a central reinforcement in STL 3D format. The dimensions are 120 mm in length, 100 mm in height, 14 mm in width, and 6 mm in thickness. The mounting holes are designed with a diameter of 6 mm. Chamfers are applied to the holes to improve the seating of the heads. The reinforcing bar reduces bending and provides two clearances for fastening. No support is needed to print this bracket, printed flat directly on the build plate.
Parameter Value Unit
length 120 mm
height 100 mm
width 14 mm
thickness 6 mm
hole diameter 6 mm
chamfer on the holes yes

Right-angle bracket 120×160 mm STL 3D file, thickness 5 mm, hole diameter 6 mm (📦 #9129)

1 object(s) - format STL
Right-angle bracket 120×160 mm STL 3D file, thickness 5 mm, hole diameter 6 mm
3D file of a mounting bracket with a central reinforcing bar in STL 3D format. The dimensions are 120 mm in length, 160 mm in height, 40 mm in width, and 5 mm in thickness. The mounting holes are designed with a diameter of 6 mm. Chamfers are applied to the holes to improve the seating of the heads. The central reinforcement bar improves rigidity and provides two clearances for screwdriver access. This bracket prints without support, printed flat on the build plate.
Parameter Value Unit
length 120 mm
height 160 mm
width 40 mm
thickness 5 mm
hole diameter 6 mm
chamfer on the holes yes

Right-angle bracket 120×160 mm STL 3D file, thickness 5 mm, hole diameter 6 mm (📦 #9147)

1 object(s) - format STL
Right-angle bracket 120×160 mm STL 3D file, thickness 5 mm, hole diameter 6 mm
Download this file of a support bracket reinforced in STL 3D format. The dimensions are 120 mm in length, 160 mm in height, 45 mm in width, and 5 mm in thickness. The drill holes are designed with a diameter of 6 mm. Chamfers are done to the holes to seat the screw heads. The central reinforcement bar enhances mechanical strength and provides two passages for fastening. Support generation is not required for printing this bracket, printed flat on the print bed.
Parameter Value Unit
length 120 mm
height 160 mm
width 45 mm
thickness 5 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 125×100 mm STL file, thickness 12 mm, hole diameter 5 mm (📦 #3580)

1 object(s) - format STL
Shelf bracket 125×100 mm STL file, thickness 12 mm, hole diameter 5 mm
Download this file of an angle bracket with a central reinforcing bar in STL 3D format. The dimensions are 125 mm in length, 100 mm in height, 20 mm in width, and 12 mm in thickness. The mounting holes have a diameter of 5 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar enhances mechanical strength and provides two clearances for fastening. This bracket prints without support, printed flat on the print bed.
Parameter Value Unit
length 125 mm
height 100 mm
width 20 mm
thickness 12 mm
hole diameter 5 mm
chamfer on the holes yes
Can't find the right model? Create it with your specs