Washer, Flat gasket, Ring 3D Files - Inner diameter 0.1 to 30 mm | page 3

Download this 3D file of gasket / washer in STL 3D file format. This model features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The thickness is 2.4 mm. A chamfer is applied on the internal diameter with a value of 1.2 mm.

3D file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The part thickness is 2.2 mm. A chamfer is present on the internal diameter with a value of 1.2 mm.

Download this 3D file of flat gasket / washer in STL 3D file format. This part features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The thickness is 3 mm. A chamfer is present on the internal diameter with a value of 2 mm.

Download this file of washer / flat gasket in STL 3D file format. This model features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The part thickness is 1 mm. There is no finish present.

Download this file of gasket / washer in STL format. This model features an inner diameter of ⌀8 mm and an outer diameter of ⌀50 mm. The thickness is 2 mm. No finish is applied.

Model of washer / flat gasket in STL 3D file format. This part features an internal diameter of ⌀8 mm and an external diameter of ⌀10 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.4 mm.

Download this file of flat gasket / washer in STL file format. This model features an internal diameter of ⌀8 mm and an external diameter of ⌀9 mm. The part thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.1 mm.

3D model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀8 mm and an external diameter of ⌀10 mm. The thickness is 2.5 mm. Fillets are present on both the internal diameter and the external diameter, each with a value of 0.1 mm.

Download this 3D model of washer / gasket in STL file format. This part has an internal diameter of ⌀8 mm and an external diameter of ⌀12 mm. The part thickness is 5.8 mm. Chamfers are present on the external diameter, each with a value of 0.3 mm. These finishes are applied on the top and bottom.

Download this 3D file of washer / gasket in STL 3D file format. This part has an internal diameter of ⌀8 mm and an external diameter of ⌀10 mm. The part thickness is 5.7 mm. No finish is present.

3D file of washer / flat gasket in STL file format. This model features an inner diameter of ⌀8 mm and an outer diameter of ⌀16 mm. The part thickness is 1 mm. There is no finish present.

3D model of flat gasket / washer in STL format. This model has an internal diameter of ⌀8.1 mm and an external diameter of ⌀15 mm. The part thickness is 5 mm. This part has no finish applied.

File of gasket / washer in STL format. This part features an inner diameter of ⌀8.3 mm and an outer diameter of ⌀14 mm. The thickness is 5.5 mm. A chamfer is applied on the inner diameter with a value of 2 mm.

File of flat gasket / washer in STL file format. This model features an inner diameter of ⌀8.3 mm and an outer diameter of ⌀15 mm. The total thickness is 6.5 mm. A chamfer is applied on the inner diameter with a value of 3 mm.

Download this model of washer / flat gasket in STL 3D file format. This model features an internal diameter of ⌀8.3 mm and an external diameter of ⌀15 mm. The part thickness is 6.5 mm. A chamfer is present on the internal diameter with a value of 2 mm.

Download this model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀8.4 mm and an outer diameter of ⌀13.5 mm. The total thickness is 4 mm. A chamfer is applied on the inner diameter with a value of 1 mm.

Model of washer / flat gasket in STL file format. This part has an inner diameter of ⌀8.4 mm and an outer diameter of ⌀13.5 mm. The total thickness is 4 mm. A fillet is applied on the inner diameter with a value of 1 mm.

Model of washer / flat gasket in STL format. This part features an inner diameter of ⌀8.4 mm and an outer diameter of ⌀13.5 mm. The thickness is 4 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1 mm.

File of washer / flat gasket in STL file format. This part features an internal diameter of ⌀8.4 mm and an external diameter of ⌀13.5 mm. The thickness is 4 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.

Model of gasket / washer in STL file format. This model features an internal diameter of ⌀8.4 mm and an external diameter of ⌀13.5 mm. The part thickness is 4 mm. A chamfer is applied on the internal diameter with a value of 2 mm.

3D model of gasket / washer in STL format. This part has an internal diameter of ⌀8.5 mm and an external diameter of ⌀14.3 mm. The total thickness is 2.4 mm. There is no finish applied.

Download this model of flat gasket / washer in STL file format. This model has an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The thickness is 3 mm. A chamfer is present on the inner diameter with a value of 0.1 mm.

3D file of washer / flat gasket in STL 3D file format. This part features an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The part thickness is 3 mm. A chamfer is applied on the inner diameter with a value of 1.2 mm.

Download this model of washer / flat gasket in STL format. This model has an internal diameter of ⌀9 mm and an external diameter of ⌀16 mm. The thickness is 3 mm. A chamfer is present on the internal diameter with a value of 1.8 mm.

3D file of washer / flat gasket in STL format. This model features an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The part thickness is 3 mm. A chamfer is applied on the inner diameter with a value of 2.4 mm.

File of washer / gasket in STL 3D file format. This part has an internal diameter of ⌀9 mm and an external diameter of ⌀18 mm. The total thickness is 2.8 mm. A chamfer is applied on the external diameter with a value of 1.2 mm.

Download this 3D file of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀9 mm and an outer diameter of ⌀18 mm. The total thickness is 2.8 mm. A chamfer is present on the inner diameter with a value of 1.2 mm.

3D model of gasket / washer in STL file format. This part has an internal diameter of ⌀9 mm and an external diameter of ⌀24 mm. The thickness is 20 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are present on both sides.

3D file of gasket / washer in STL format. This part has an inner diameter of ⌀9 mm and an outer diameter of ⌀21 mm. The total thickness is 1.5 mm. No finish is available.

Download this 3D model of washer / gasket in STL format. This part has an internal diameter of ⌀9 mm and an external diameter of ⌀11 mm. The total thickness is 5.8 mm. There is no finish available.