O-ring 3D Files - Inner diameter (ID) 0.1 to 20 mm | page 3

Model(s) 61 to 90 of 142

O-ring STL 3D file ID 11.4 × CS 9.9 mm (📦 #4617)

1 object(s) - format STL
O-ring STL 3D file ID 11.4 × CS 9.9 mm
3D file of O-ring (torus-shaped seal) with ID 11.4 mm by section thickness 9.9  mm. Final diameter is 31.2 mm.
Parameter Value Unit
inner diameter (ID) 11.4 mm
cross section (CS) 9.9 mm

O-ring STL 3D file ID 11.7 × CS 7 mm (📦 #8669)

1 object(s) - format STL
O-ring STL 3D file ID 11.7 × CS 7 mm
STL file of sealing ring with Internal diameter (ID) 11.7 mm / thickness 7  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25.7 mm.
Parameter Value Unit
inner diameter (ID) 11.7 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 11.8 × CS 2.5 mm (📦 #1922)

1 object(s) - format STL
O-ring STL 3D file ID 11.8 × CS 2.5 mm
Model of O-ring with dimensions Inner diameter 11.8 mm × thickness 2.5  mm. Final diameter resulting is 16.8 mm.
Parameter Value Unit
inner diameter (ID) 11.8 mm
cross section (CS) 2.5 mm

O'ring STL 3D file ID 11.9 × CS 7 mm (📦 #8673)

1 object(s) - format STL
o'ring STL 3D file ID 11.9 × CS 7 mm
File of sealing ring with Inner diameter (ID) 11.9 mm by section thickness 7  mm. Outer diameter (OD) corresponds to 25.9 mm.
Parameter Value Unit
inner diameter (ID) 11.9 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 12 × CS 2 mm (📦 #1017)

1 object(s) - format STL
O-ring STL 3D file ID 12 × CS 2 mm
STL model of circular seal with dimensions ID 12 mm / CS (cross section) 2  mm. Final diameter corresponds to 16 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 2 mm

O'ring STL file ID 12 × CS 1.5 mm (📦 #1036)

1 object(s) - format STL
o'ring STL file ID 12 × CS 1.5 mm
File of rubber ring with Inner diameter 12 mm × CS (cross section) 1.5  mm. Outer diameter (OD, for outer diameter) resulting is therefore 15 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 1.5 mm

O-ring STL file ID 12 × CS 1 mm (📦 #1576)

1 object(s) - format STL
O-ring STL file ID 12 × CS 1 mm
3D file of O-ring with Internal diameter (ID) 12 mm × section thickness 1  mm. Final diameter resulting is therefore 14 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 1 mm

O-ring STL file ID 12 × CS 1.9 mm (📦 #3638)

1 object(s) - format STL
O-ring STL file ID 12 × CS 1.9 mm
3D file in STL format of O-ring (torus-shaped seal) with Internal diameter 12 mm / CS (cross section) 1.9  mm. External diameter (OD) resulting is 15.8 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 1.9 mm

O'ring STL file ID 12 × CS 4 mm (📦 #3645)

1 object(s) - format STL
o'ring STL file ID 12 × CS 4 mm
Model of sealing ring with dimensions Internal diameter (ID) 12 mm / CS 4  mm. Final diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 4 mm

O-ring STL file ID 12 × CS 6 mm (📦 #7210)

1 object(s) - format STL
O-ring STL file ID 12 × CS 6 mm
STL model of O-ring with Inner diameter 12 mm by thickness 6  mm. Final diameter resulting is 24 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 6 mm

O'ring STL file ID 12.1 × CS 7 mm (📦 #8676)

1 object(s) - format STL
o'ring STL file ID 12.1 × CS 7 mm
3D file in STL format of rubber ring with dimensions ID 12.1 mm by CS 7  mm. The outer diameter is 26.1 mm.
Parameter Value Unit
inner diameter (ID) 12.1 mm
cross section (CS) 7 mm

O-ring STL file ID 12.2 × CS 2.2 mm (📦 #1459)

1 object(s) - format STL
O-ring STL file ID 12.2 × CS 2.2 mm
3D model of O-ring (torus-shaped seal) with dimensions Internal diameter 12.2 mm by section thickness 2.2  mm. The outer diameter is therefore 16.6 mm.
Parameter Value Unit
inner diameter (ID) 12.2 mm
cross section (CS) 2.2 mm

O-ring STL 3D file ID 12.37 × CS 2.62 mm (📦 #1031)

1 object(s) - format STL (5.0/5) 2 vote(s)
O-ring STL 3D file ID 12.37 × CS 2.62 mm
3D file in STL format of sealing ring with Inner diameter (ID) 12.37 mm × section thickness 2.62  mm. The outer diameter resulting is 17.61 mm.
Parameter Value Unit
inner diameter (ID) 12.37 mm
cross section (CS) 2.62 mm

O-ring STL file ID 12.4 × CS 7 mm (📦 #8679)

1 object(s) - format STL
O-ring STL file ID 12.4 × CS 7 mm
Model of sealing ring with dimensions Inner diameter (ID) 12.4 mm by thickness 7  mm. External diameter (OD) is therefore 26.4 mm.
Parameter Value Unit
inner diameter (ID) 12.4 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 12.5 × CS 7 mm (📦 #8769)

1 object(s) - format STL
O-ring STL 3D file ID 12.5 × CS 7 mm
3D file in STL format of circular seal with dimensions Internal diameter 12.5 mm / CS (cross section) 7  mm. Final diameter resulting is therefore 26.5 mm.
Parameter Value Unit
inner diameter (ID) 12.5 mm
cross section (CS) 7 mm

O'ring STL file ID 12.7 × CS 7 mm (📦 #8770)

1 object(s) - format STL
o'ring STL file ID 12.7 × CS 7 mm
3D file of circular seal with Internal diameter (ID) 12.7 mm / CS 7  mm. Outer diameter (OD, for outer diameter) is 26.7 mm.
Parameter Value Unit
inner diameter (ID) 12.7 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 12.9 × CS 7 mm (📦 #8771)

1 object(s) - format STL
O-ring STL 3D file ID 12.9 × CS 7 mm
File of rubber ring with dimensions Internal diameter 12.9 mm by thickness 7  mm. Final diameter resulting corresponds to 26.9 mm.
Parameter Value Unit
inner diameter (ID) 12.9 mm
cross section (CS) 7 mm

O'ring STL 3D file ID 13 × CS 2 mm (📦 #1518)

1 object(s) - format STL (5.0/5) 1 vote(s)
o'ring STL 3D file ID 13 × CS 2 mm
Model of sealing ring with Internal diameter (ID) 13 mm by section thickness 2  mm. External diameter (OD) resulting corresponds to 17 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 13 × CS 3 mm (📦 #1980)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 3 mm
File of rubber ring with ID 13 mm by thickness 3  mm. Outer diameter (OD) resulting corresponds to 19 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 13 × CS 1 mm (📦 #2106)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 1 mm
STL model of rubber ring with ID 13 mm / thickness 1  mm. Final diameter resulting is therefore 15 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 1 mm

O-ring STL file ID 13 × CS 1.8 mm (📦 #2107)

1 object(s) - format STL
O-ring STL file ID 13 × CS 1.8 mm
File of rubber ring with dimensions Internal diameter (ID) 13 mm × thickness 1.8  mm. Final diameter corresponds to 16.6 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 1.8 mm

O'ring STL 3D file ID 13 × CS 4 mm (📦 #3149)

1 object(s) - format STL
o'ring STL 3D file ID 13 × CS 4 mm
File of rubber ring with Internal diameter (ID) 13 mm / thickness 4  mm. Outer diameter (OD, for outer diameter) resulting is 21 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 13 × CS 1.5 mm (📦 #4076)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 1.5 mm
STL file of circular seal with Inner diameter (ID) 13 mm / thickness 1.5  mm. Outer diameter (OD) is therefore 16 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 13.1 × CS 5.6 mm (📦 #8670)

1 object(s) - format STL
O-ring STL 3D file ID 13.1 × CS 5.6 mm
3D file in STL format of O-ring with Internal diameter 13.1 mm by section thickness 5.6  mm. External diameter (OD) resulting corresponds to 24.3 mm.
Parameter Value Unit
inner diameter (ID) 13.1 mm
cross section (CS) 5.6 mm

O-ring STL 3D file ID 13.3 × CS 5.6 mm (📦 #8674)

1 object(s) - format STL
O-ring STL 3D file ID 13.3 × CS 5.6 mm
3D file in STL format of O-ring with dimensions ID (inner diameter) 13.3 mm by CS (cross section) 5.6  mm. Final diameter corresponds to 24.5 mm.
Parameter Value Unit
inner diameter (ID) 13.3 mm
cross section (CS) 5.6 mm

O-ring STL file ID 13.5 × CS 5.6 mm (📦 #8677)

1 object(s) - format STL
O-ring STL file ID 13.5 × CS 5.6 mm
STL file of sealing ring with Internal diameter (ID) 13.5 mm × section thickness 5.6  mm. The outer diameter resulting corresponds to 24.7 mm.
Parameter Value Unit
inner diameter (ID) 13.5 mm
cross section (CS) 5.6 mm

O-ring STL 3D file ID 13.5 × CS 7 mm (📦 #8768)

1 object(s) - format STL
O-ring STL 3D file ID 13.5 × CS 7 mm
3D file of O-ring (torus-shaped seal) with dimensions Inner diameter 13.5 mm by thickness 7  mm. Outer diameter (OD) is 27.5 mm.
Parameter Value Unit
inner diameter (ID) 13.5 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 13.8 × CS 2 mm (📦 #8255)

1 object(s) - format STL
O-ring STL 3D file ID 13.8 × CS 2 mm
3D file of circular seal with dimensions Inner diameter (ID) 13.8 mm / section thickness 2  mm. External diameter (OD) corresponds to 17.8 mm.
Parameter Value Unit
inner diameter (ID) 13.8 mm
cross section (CS) 2 mm

O-ring STL file ID 13.8 × CS 5.6 mm (📦 #8680)

1 object(s) - format STL
O-ring STL file ID 13.8 × CS 5.6 mm
STL model of rubber ring with ID 13.8 mm by CS 5.6  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
Parameter Value Unit
inner diameter (ID) 13.8 mm
cross section (CS) 5.6 mm

O-ring STL 3D file ID 14 × CS 2.5 mm (📦 #1038)

1 object(s) - format STL
O-ring STL 3D file ID 14 × CS 2.5 mm
Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5  mm. Outer diameter (OD) is therefore 19 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 2.5 mm
Can't find the right model? Create it with your specs