Round air vent grill 3D Files - Male diameter 50 to 100 mm | page 2

Model(s) 31 to 60 of 87

Round air vent STL file ∅ 70 mm, slat angle: 45° (📦 #1319)

1 object(s) - format STL

Design of a round air vent for air circulation in STL format. Its insertion diameter is 70 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent grille has a thin flange of 5 mm. The full diameter of the model is 80 mm.

Parameter	Value	Unit
male diameter	70	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	no

Round air vent STL file ∅ 71 mm, slat angle: 45° with central reinforcement (📦 #2053)

1 object(s) - format STL

3D file of a round air vent for ventilation in STL format. Its insertion diameter measures 71 mm. The slats have an angle of 45° and a high thickness of 2.4 mm. A central reinforcement strengthens the slats. This ventilation grille has a prominent flange of 20 mm. The overall diameter of this model is 111 mm.

Parameter	Value	Unit
male diameter	71	mm
slat angle	45	°
slat thickness	2.4	mm
flange width	20	mm
central reinforcement	yes

Round air vent STL 3D file ∅ 71 mm, slat angle: 40° with central reinforcement (📦 #2054)

1 object(s) - format STL

Model of a round air vent for ventilation in STL format. Its insertion diameter measures 71 mm. The slats have an angle of 40° and a high thickness of 2.4 mm. A centered vertical reinforcement reinforces the slats. This 3D aeration grille has a thin flange of 4 mm. The full diameter of the model is 79 mm.

Parameter	Value	Unit
male diameter	71	mm
slat angle	40	°
slat thickness	2.4	mm
flange width	4	mm
central reinforcement	yes

Round air vent STL file ∅ 71 mm, slat angle: 60° (📦 #2714)

1 object(s) - format STL

3D model of a round grille for ventilation in STL format. Its insertion diameter is 71 mm. The slats have a steep angle of 60° and a low thickness of 1.6 mm. This vent cover features no flange.

Parameter	Value	Unit
male diameter	71	mm
slat angle	60	°
slat thickness	1.6	mm
flange width	0	mm
central reinforcement	no

Round air vent STL 3D file ∅ 71 mm, slat angle: 10° (📦 #2715)

1 object(s) - format STL

3D model of a round grille for air circulation in STL format. Its male diameter is 71 mm. The slats have a slight angle of 10° and a low thickness of 1.6 mm. This vent cover features no flange.

Parameter	Value	Unit
male diameter	71	mm
slat angle	10	°
slat thickness	1.6	mm
flange width	0	mm
central reinforcement	no

Round air vent STL file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1396)

1 object(s) - format STL

3D design of a round grille for air circulation in STL format. Its male diameter measures 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement reinforces the slats. This vent cover has a thin flange of 5 mm. The total diameter of this model is 81.2 mm.

Parameter	Value	Unit
male diameter	71.2	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	yes

Round air vent STL 3D file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1739)

1 object(s) - format STL

Model of a round grille for ventilation in STL format. Its male diameter is 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This aeration grille features a collar of 10 mm. The overall diameter of this model is 91.2 mm.

Parameter	Value	Unit
male diameter	71.2	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	10	mm
central reinforcement	yes

Round air vent STL file ∅ 71.5 mm, slat angle: 40° (📦 #1276)

1 object(s) - format STL

File of a round air vent for ventilation in STL format. Its male diameter is 71.5 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This ventilation grille has a thin flange of 5 mm. The overall diameter of this model is 81.5 mm.

Parameter	Value	Unit
male diameter	71.5	mm
slat angle	40	°
slat thickness	1.4	mm
flange width	5	mm
central reinforcement	no

Round air vent STL file ∅ 75 mm, slat angle: 45° (📦 #2617)

1 object(s) - format STL

Design of a round air vent for air circulation in STL format. Its male diameter is 75 mm. The slats have an angle of 45° and a high thickness of 2 mm. This vent cover features a prominent flange of 15 mm. The total diameter of the model is 105 mm.

Parameter	Value	Unit
male diameter	75	mm
slat angle	45	°
slat thickness	2	mm
flange width	15	mm
central reinforcement	no

Round air vent STL file ∅ 76 mm, slat angle: 45° (📦 #2619)

1 object(s) - format STL

3D model of a round grille for air circulation in STL format. Its insertion diameter is 76 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. This 3D vent grille features a prominent flange of 20 mm. The full diameter of this model is 116 mm.

Parameter	Value	Unit
male diameter	76	mm
slat angle	45	°
slat thickness	1.5	mm
flange width	20	mm
central reinforcement	no

Round air vent STL file ∅ 77.5 mm, slat angle: 10° with central reinforcement (📦 #2529)

1 object(s) - format STL

Model of a round air vent for ventilation in STL format. Its insertion diameter is 77.5 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This ventilation grille features a collar of 10 mm. The overall diameter of the model is 97.5 mm.

Parameter	Value	Unit
male diameter	77.5	mm
slat angle	10	°
slat thickness	2	mm
flange width	10	mm
central reinforcement	yes

Round air vent STL 3D file ∅ 78 mm, slat angle: 30° (📦 #3597)

1 object(s) - format STL

3D design of a round air vent for ventilation in STL format. Its insertion diameter measures 78 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. This 3D vent cover features a prominent flange of 20 mm. The overall diameter of this model is 118 mm.

Parameter	Value	Unit
male diameter	78	mm
slat angle	30	°
slat thickness	2	mm
flange width	20	mm
central reinforcement	no

Round air vent STL 3D file ∅ 80 mm, slat angle: 45° (📦 #1264)

1 object(s) - format STL

3D design of a round grille for ventilation in STL format. Its male diameter measures 80 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This 3D aeration grille features a thin flange of 5 mm. The overall diameter of this model is 90 mm.

Parameter	Value	Unit
male diameter	80	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	no

Round air vent STL 3D file ∅ 80 mm, slat angle: 30° with central reinforcement (📦 #1562)

1 object(s) - format STL

Design of a round air vent for ventilation in STL format. Its insertion diameter is 80 mm. The slats have a slight angle of 30° and a high thickness of 2.2 mm. A centered vertical reinforcement strengthens the whole structure. This vent cover features a collar of 8 mm. The total diameter of this model is 96 mm.

Parameter	Value	Unit
male diameter	80	mm
slat angle	30	°
slat thickness	2.2	mm
flange width	8	mm
central reinforcement	yes

Round air vent STL 3D file ∅ 80 mm, slat angle: 60° with central reinforcement (📦 #1777)

1 object(s) - format STL

File of a round air vent for ventilation in STL format. Its insertion diameter measures 80 mm. The slats have a steep angle of 60° and a high thickness of 2.4 mm. A central reinforcement secures the whole structure. This aeration grille has a flange of 10 mm. The overall diameter of the model is 100 mm.

Parameter	Value	Unit
male diameter	80	mm
slat angle	60	°
slat thickness	2.4	mm
flange width	10	mm
central reinforcement	yes

Round air vent STL file ∅ 80 mm, slat angle: 45° with central reinforcement (📦 #2384)

1 object(s) - format STL

File of a round air vent for ventilation in STL format. Its male diameter is 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille features a prominent flange of 20 mm. The overall diameter of the model is 120 mm.

Parameter	Value	Unit
male diameter	80	mm
slat angle	45	°
slat thickness	2	mm
flange width	20	mm
central reinforcement	yes

Round air vent STL file ∅ 80 mm, slat angle: 45° with central reinforcement (📦 #2385)

1 object(s) - format STL

File of a round grille for ventilation in STL format. Its male diameter measures 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This vent grille has a flange of 8 mm. The total diameter of the model is 96 mm.

Parameter	Value	Unit
male diameter	80	mm
slat angle	45	°
slat thickness	2	mm
flange width	8	mm
central reinforcement	yes

Round air vent STL 3D file ∅ 80 mm, slat angle: 45° (📦 #2386)

1 object(s) - format STL

Model of a round grille for air circulation in STL format. Its insertion diameter measures 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. This vent cover has a flange of 10 mm. The full diameter of this model is 100 mm.

Parameter	Value	Unit
male diameter	80	mm
slat angle	45	°
slat thickness	2	mm
flange width	10	mm
central reinforcement	no

Round air vent STL 3D file ∅ 80 mm, slat angle: 60° with central reinforcement (📦 #3007)

1 object(s) - format STL

Model of a round grille for air circulation in STL format. Its insertion diameter measures 80 mm. The slats have a steep angle of 60° and a high thickness of 2 mm. A central reinforcement strengthens the whole structure. This vent cover features a prominent flange of 20 mm. The total diameter of this model is 120 mm.

Parameter	Value	Unit
male diameter	80	mm
slat angle	60	°
slat thickness	2	mm
flange width	20	mm
central reinforcement	yes

Round air vent STL file ∅ 80 mm, slat angle: 30° (📦 #3773)

1 object(s) - format STL

File of a round air vent for air circulation in STL format. Its insertion diameter measures 80 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. This vent grille features no flange.

Parameter	Value	Unit
male diameter	80	mm
slat angle	30	°
slat thickness	2	mm
flange width	0	mm
central reinforcement	no

Round air vent STL 3D file ∅ 85 mm, slat angle: 45° (📦 #1283)

1 object(s) - format STL

Model of a round vent cover for air circulation in STL format. Its insertion diameter is 85 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This aeration grille has a thin flange of 5 mm. The full diameter of the model is 95 mm.

Parameter	Value	Unit
male diameter	85	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	no

Round air vent STL 3D file ∅ 85 mm, slat angle: 35° (📦 #1299)

1 object(s) - format STL

3D file of a round vent cover for air circulation in STL format. Its insertion diameter is 85 mm. The slats have an angle of 35° and a high thickness of 1.8 mm. This aeration grille has a thin flange of 5 mm. The total diameter of the model is 95 mm.

Parameter	Value	Unit
male diameter	85	mm
slat angle	35	°
slat thickness	1.8	mm
flange width	5	mm
central reinforcement	no

Round air vent STL file ∅ 85 mm, slat angle: 35° (📦 #1301)

1 object(s) - format STL

3D design of a round vent cover for air circulation in STL format. Its male diameter measures 85 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This vent grille features a thin flange of 4 mm. The total diameter of this model is 93 mm.

Parameter	Value	Unit
male diameter	85	mm
slat angle	35	°
slat thickness	1.6	mm
flange width	4	mm
central reinforcement	no

Round air vent STL file ∅ 85 mm, slat angle: 45° (📦 #1398)

1 object(s) - format STL

3D design of a round grille for air circulation in STL format. Its male diameter measures 85 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This 3D vent grille has a thin flange of 4 mm. The overall diameter of this model is 93 mm.

Parameter	Value	Unit
male diameter	85	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	4	mm
central reinforcement	no

Round air vent STL file ∅ 85 mm, slat angle: 45° (📦 #2061)

1 object(s) - format STL

3D file of a round air vent for air circulation in STL format. Its male diameter is 85 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This 3D vent cover has no flange.

Parameter	Value	Unit
male diameter	85	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	0	mm
central reinforcement	no

Round air vent STL file ∅ 87 mm, slat angle: 30° (📦 #3804)

1 object(s) - format STL

3D design of a round grille for ventilation in STL format. Its male diameter measures 87 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. This 3D aeration grille features a prominent flange of 20 mm. The full diameter of this model is 127 mm.

Parameter	Value	Unit
male diameter	87	mm
slat angle	30	°
slat thickness	2	mm
flange width	20	mm
central reinforcement	no

Round air vent STL file ∅ 88 mm, slat angle: 45° with central reinforcement (📦 #1829)

1 object(s) - format STL

Design of a round vent cover for ventilation in STL format. Its male diameter measures 88 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement secures the slats. This vent cover features a prominent flange of 15 mm. The full diameter of this model is 118 mm.

Parameter	Value	Unit
male diameter	88	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	15	mm
central reinforcement	yes

Round air vent STL file ∅ 90 mm, slat angle: 35° (📦 #1291)

1 object(s) - format STL (5.0/5) 1 vote(s)

3D file of a round air vent for air circulation in STL format. Its male diameter measures 90 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This ventilation grille features no flange.

Parameter	Value	Unit
male diameter	90	mm
slat angle	35	°
slat thickness	1.6	mm
flange width	0	mm
central reinforcement	no

Round air vent STL 3D file ∅ 90 mm, slat angle: 35° with central reinforcement (📦 #1320)

1 object(s) - format STL

3D design of a round grille for ventilation in STL format. Its male diameter is 90 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the whole structure. This 3D aeration grille features no flange.

Parameter	Value	Unit
male diameter	90	mm
slat angle	35	°
slat thickness	1.6	mm
flange width	0	mm
central reinforcement	yes

Round air vent STL file ∅ 90 mm, slat angle: 35° with central reinforcement (📦 #1492)

1 object(s) - format STL

Design of a round grille for air circulation in STL format. Its insertion diameter measures 90 mm. The slats have an angle of 35° and a high thickness of 2.4 mm. A central reinforcement reinforces the whole structure. This aeration grille has a collar of 10 mm. The total diameter of the model is 110 mm.

Parameter	Value	Unit
male diameter	90	mm
slat angle	35	°
slat thickness	2.4	mm
flange width	10	mm
central reinforcement	yes

Can't find the right model? Create it with your specs