Washer, Flat gasket, Ring 3D Files - Inner diameter 0.1 to 30 mm
Find the listing of 3D models of washer, Flat gasket, Ring with inner diameter 0.1 to 30 mm, sorted in ascending order.
20 Model(s)
Washer / Flat Gasket STL 3D file ⌀ID: 0.1 mm ⌀OD: 40 mm thickness: 8 mm + chamfers (📦 #1992)
1 object(s) - format STL
Download this file of gasket / washer in STL file format. This model features an inner diameter of ⌀0.1 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 0.1 | mm |
| outer diameter | 40 | mm |
| thickness | 8 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 20 mm thickness: 10 mm + chamfer (📦 #1934)
1 object(s) - format STL
3D file of washer / gasket in STL format. This model features an inner diameter of ⌀10 mm and an outer diameter of ⌀20 mm. The total thickness is 10 mm. A chamfer is applied on the inner diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 20 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 10 mm ⌀OD: 12 mm thickness: 1 mm (📦 #2087)
1 object(s) - format STL (4.0/5) 1 vote(s)
Download this file of flat gasket / washer in STL file format. This model features an inner diameter of ⌀10 mm and an outer diameter of ⌀12 mm. The part thickness is 1 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 12 | mm |
| thickness | 1 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 10.1 mm thickness: 1 mm (📦 #2348)
1 object(s) - format STL
File of washer / gasket in STL 3D file format. This model has an inner diameter of ⌀10 mm and an outer diameter of ⌀10.1 mm. The part thickness is 1 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 10.1 | mm |
| thickness | 1 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 15 mm thickness: 5 mm + chamfers (📦 #2349)
1 object(s) - format STL
File of washer / flat gasket in STL file format. This part features an inner diameter of ⌀10 mm and an outer diameter of ⌀15 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 15 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 12 mm ⌀OD: 14 mm thickness: 2 mm + fillets (📦 #2165)
1 object(s) - format STL
Download this file of gasket / washer in STL 3D file format. This model features an internal diameter of ⌀12 mm and an external diameter of ⌀14 mm. The part thickness is 2 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.2 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 12 | mm |
| outer diameter | 14 | mm |
| thickness | 2 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 16 mm ⌀OD: 24 mm thickness: 3 mm + chamfers (📦 #1695)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This part has an inner diameter of ⌀16 mm and an outer diameter of ⌀24 mm. The total thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 24 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 2.0 mm (📦 #2329)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The part thickness is 2.0 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 2.0 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.5 mm (📦 #2341)
1 object(s) - format STL
File of washer / gasket in STL format. This part has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The total thickness is 3.5 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.2 mm (📦 #2342)
1 object(s) - format STL
Model of gasket / washer in STL file format. This part has an internal diameter of ⌀16.5 mm and an external diameter of ⌀25.0 mm. The total thickness is 3.2 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 18 mm ⌀OD: 24 mm thickness: 10 mm + chamfers (📦 #1704)
1 object(s) - format STL
3D model of washer / gasket in STL format. This model has an internal diameter of ⌀18 mm and an external diameter of ⌀24 mm. The total thickness is 10 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 24 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL file ⌀ID: 18 mm ⌀OD: 20 mm thickness: 1.2 mm (📦 #1714)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This part has an inner diameter of ⌀18 mm and an outer diameter of ⌀20 mm. The thickness is 1.2 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 20 | mm |
| thickness | 1.2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 18 mm ⌀OD: 22 mm thickness: 0.4 mm + fillets (📦 #1738)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀18 mm and an outer diameter of ⌀22 mm. The part thickness is 0.4 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 22 | mm |
| thickness | 0.4 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 20.0 mm ⌀OD: 22.0 mm thickness: 2.5 mm + fillets (📦 #2208)
1 object(s) - format STL
3D file of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀20.0 mm and an outer diameter of ⌀22.0 mm. The part thickness is 2.5 mm. Fillets are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 20.0 | mm |
| outer diameter | 22.0 | mm |
| thickness | 2.5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 20.8 mm ⌀OD: 50 mm thickness: 12 mm (📦 #2379)
1 object(s) - format STL
Model of flat gasket / washer in STL file format. This part features an internal diameter of ⌀20.8 mm and an external diameter of ⌀50 mm. The thickness is 12 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 20.8 | mm |
| outer diameter | 50 | mm |
| thickness | 12 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 22 mm ⌀OD: 25 mm thickness: 3 mm + chamfers (📦 #1881)
1 object(s) - format STL
Download this file of washer / gasket in STL format. This part has an internal diameter of ⌀22 mm and an external diameter of ⌀25 mm. The thickness is 3 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 22 | mm |
| outer diameter | 25 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 25 mm ⌀OD: 35 mm thickness: 3 mm + chamfer (📦 #1906)
1 object(s) - format STL
File of gasket / washer in STL file format. This part features an internal diameter of ⌀25 mm and an external diameter of ⌀35 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25 | mm |
| outer diameter | 35 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 8 mm + chamfers (📦 #1700)
1 object(s) - format STL (5.0/5) 2 vote(s)
File of gasket / washer in STL format. This part has an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 8 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 12 mm + chamfers (📦 #1701)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 12 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 12 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 16 mm + chamfers (📦 #1702)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 16 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 16 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Can't find the right model?
Create it with your parameters