?>

O-ring 3D Files - Inner diameter (ID) 0.1 to 50 mm | page 1

Model(s) 1 to 30 of 147

O'ring STL 3D file ID 0.74 × CS 1.02 mm (📦 #1032)

1 object(s) - format STL
o'ring STL 3D file ID 0.74 × CS 1.02 mm
3D model in STL format of O-ring with ID (inner diameter) 0.74 mm × section thickness 1.02  mm. External diameter (OD) corresponds to 2.78 mm.
Parameter Value Unit
inner diameter (ID) 0.74 mm
cross section (CS) 1.02 mm

O-ring STL file ID 1 × CS 0.1 mm (📦 #3498)

1 object(s) - format STL
O-ring STL file ID 1 × CS 0.1 mm
STL model of O-ring (torus-shaped seal) with Internal diameter (ID) 1 mm by CS (cross section) 0.1  mm. Outer diameter (OD) is 1.2 mm.
Parameter Value Unit
inner diameter (ID) 1 mm
cross section (CS) 0.1 mm

O-ring STL file ID 2 × CS 1 mm (📦 #2369)

1 object(s) - format STL
O-ring STL file ID 2 × CS 1 mm
3D file of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 2 mm / CS 1  mm. External diameter (OD) resulting corresponds to 4 mm.
Parameter Value Unit
inner diameter (ID) 2 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 3 × CS 1.5 mm (📦 #1041)

1 object(s) - format STL
O-ring STL 3D file ID 3 × CS 1.5 mm
Model of rubber ring with Internal diameter (ID) 3 mm / section thickness 1.5  mm. The outer diameter resulting corresponds to 6 mm.
Parameter Value Unit
inner diameter (ID) 3 mm
cross section (CS) 1.5 mm

O'ring STL 3D file ID 3 × CS 1 mm (📦 #1042)

1 object(s) - format STL
o'ring STL 3D file ID 3 × CS 1 mm
STL file of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 3 mm / CS 1  mm. Outer diameter (OD, for outer diameter) is 5 mm.
Parameter Value Unit
inner diameter (ID) 3 mm
cross section (CS) 1 mm

O'ring STL 3D file ID 3.5 × CS 1.5 mm (📦 #3790)

1 object(s) - format STL
o'ring STL 3D file ID 3.5 × CS 1.5 mm
3D file of rubber ring with Internal diameter (ID) 3.5 mm by CS (cross section) 1.5  mm. External diameter (OD) corresponds to 6.5 mm.
Parameter Value Unit
inner diameter (ID) 3.5 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 3.6 × CS 1.5 mm (📦 #3791)

1 object(s) - format STL
O-ring STL 3D file ID 3.6 × CS 1.5 mm
STL file of sealing ring with Internal diameter (ID) 3.6 mm by CS (cross section) 1.5  mm. Final diameter resulting corresponds to 6.6 mm.
Parameter Value Unit
inner diameter (ID) 3.6 mm
cross section (CS) 1.5 mm

O'ring STL file ID 4 × CS 1 mm (📦 #2370)

1 object(s) - format STL
o'ring STL file ID 4 × CS 1 mm
3D model of O-ring with dimensions Inner diameter 4 mm by CS (cross section) 1  mm. Outer diameter (OD, for outer diameter) resulting is therefore 6 mm.
Parameter Value Unit
inner diameter (ID) 4 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 4 × CS 6 mm (📦 #3933)

1 object(s) - format STL
O-ring STL 3D file ID 4 × CS 6 mm
File of circular seal with dimensions Inner diameter (ID) 4 mm by section thickness 6  mm. Outer diameter (OD, for outer diameter) resulting is therefore 16 mm.
Parameter Value Unit
inner diameter (ID) 4 mm
cross section (CS) 6 mm

O-ring STL file ID 4.47 × CS 1.78 mm (📦 #1037)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 4.47 × CS 1.78 mm
File of circular seal with dimensions ID (inner diameter) 4.47 mm × section thickness 1.78  mm. Final diameter is therefore 8.03 mm.
Parameter Value Unit
inner diameter (ID) 4.47 mm
cross section (CS) 1.78 mm

O'ring STL 3D file ID 4.6 × CS 0.8 mm (📦 #1753)

1 object(s) - format STL
o'ring STL 3D file ID 4.6 × CS 0.8 mm
3D model in STL format of O-ring with dimensions Inner diameter (ID) 4.6 mm by CS 0.8  mm. Final diameter resulting is 6.2 mm.
Parameter Value Unit
inner diameter (ID) 4.6 mm
cross section (CS) 0.8 mm

O-ring STL 3D file ID 4.7 × CS 1.9 mm (📦 #3226)

1 object(s) - format STL
O-ring STL 3D file ID 4.7 × CS 1.9 mm
3D file of O-ring (torus-shaped seal) with Inner diameter 4.7 mm / CS 1.9  mm. External diameter (OD) is therefore 8.5 mm.
Parameter Value Unit
inner diameter (ID) 4.7 mm
cross section (CS) 1.9 mm

O-ring STL file ID 5 × CS 2 mm (📦 #1035)

1 object(s) - format STL
O-ring STL file ID 5 × CS 2 mm
3D file in STL format of circular seal with dimensions Internal diameter 5 mm × CS 2  mm. Outer diameter (OD, for outer diameter) resulting is therefore 9 mm.
Parameter Value Unit
inner diameter (ID) 5 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 5 × CS 1 mm (📦 #1044)

1 object(s) - format STL
O-ring STL 3D file ID 5 × CS 1 mm
3D file of sealing ring with Inner diameter (ID) 5 mm / CS (cross section) 1  mm. Final diameter resulting is 7 mm.
Parameter Value Unit
inner diameter (ID) 5 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 5.1 × CS 1.6 mm (📦 #1565)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL 3D file ID 5.1 × CS 1.6 mm
STL file of O-ring (torus-shaped seal) with Internal diameter 5.1 mm × thickness 1.6  mm. Outer diameter (OD) resulting is therefore 8.3 mm.
Parameter Value Unit
inner diameter (ID) 5.1 mm
cross section (CS) 1.6 mm

O-ring STL file ID 5.2 × CS 2 mm (📦 #1056)

1 object(s) - format STL
O-ring STL file ID 5.2 × CS 2 mm
3D file of O-ring (torus-shaped seal) with Internal diameter 5.2 mm / CS 2 mm. Final diameter resulting corresponds to 9.2 mm.
Parameter Value Unit
inner diameter (ID) 5.2 mm
cross section (CS) 2 mm

O'ring STL file ID 5.3 × CS 2.4 mm (📦 #1014)

1 object(s) - format STL
o'ring STL file ID 5.3 × CS 2.4 mm
File of O-ring with dimensions ID (inner diameter) 5.3 mm / section thickness 2.4  mm. Outer diameter (OD) is 10.1 mm.
Parameter Value Unit
inner diameter (ID) 5.3 mm
cross section (CS) 2.4 mm

O-ring STL 3D file ID 6.07 × CS 1.78 mm (📦 #1033)

1 object(s) - format STL
O-ring STL 3D file ID 6.07 × CS 1.78 mm
3D model of sealing ring with Internal diameter 6.07 mm by CS 1.78  mm. The outer diameter is 9.63 mm.
Parameter Value Unit
inner diameter (ID) 6.07 mm
cross section (CS) 1.78 mm

O'ring STL 3D file ID 6.7 × CS 1.6 mm (📦 #3499)

1 object(s) - format STL
o'ring STL 3D file ID 6.7 × CS 1.6 mm
3D file of sealing ring with dimensions Inner diameter 6.7 mm / CS 1.6  mm. Final diameter is 9.9 mm.
Parameter Value Unit
inner diameter (ID) 6.7 mm
cross section (CS) 1.6 mm

O-ring STL 3D file ID 7 × CS 2 mm (📦 #1015)

1 object(s) - format STL
O-ring STL 3D file ID 7 × CS 2 mm
Model of rubber ring with dimensions Inner diameter 7 mm × thickness 2  mm. Final diameter resulting is therefore 11 mm.
Parameter Value Unit
inner diameter (ID) 7 mm
cross section (CS) 2 mm

O-ring STL file ID 7 × CS 1.5 mm (📦 #1039)

1 object(s) - format STL
O-ring STL file ID 7 × CS 1.5 mm
3D file in STL format of O-ring with dimensions Internal diameter 7 mm / CS 1.5  mm. External diameter (OD) is therefore 10 mm.
Parameter Value Unit
inner diameter (ID) 7 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 7.7 × CS 1.9 mm (📦 #3227)

1 object(s) - format STL
O-ring STL 3D file ID 7.7 × CS 1.9 mm
3D model of sealing ring with Internal diameter 7.7 mm by thickness 1.9  mm. Outer diameter (OD, for outer diameter) resulting is 11.5 mm.
Parameter Value Unit
inner diameter (ID) 7.7 mm
cross section (CS) 1.9 mm

O-ring STL file ID 8 × CS 2 mm (📦 #2362)

1 object(s) - format STL
O-ring STL file ID 8 × CS 2 mm
3D file of sealing ring with dimensions Inner diameter 8 mm / thickness 2  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 12 mm.
Parameter Value Unit
inner diameter (ID) 8 mm
cross section (CS) 2 mm

O'ring STL file ID 9 × CS 2 mm (📦 #2327)

1 object(s) - format STL
o'ring STL file ID 9 × CS 2 mm
STL model of O-ring with Internal diameter (ID) 9 mm by thickness 2  mm. Final diameter resulting is therefore 13 mm.
Parameter Value Unit
inner diameter (ID) 9 mm
cross section (CS) 2 mm

O-ring STL file ID 9 × CS 3 mm (📦 #2784)

1 object(s) - format STL
O-ring STL file ID 9 × CS 3 mm
3D model of O-ring with dimensions Internal diameter 9 mm / thickness 3  mm. External diameter (OD) resulting is therefore 15 mm.
Parameter Value Unit
inner diameter (ID) 9 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 9.4 × CS 5.3 mm (📦 #3113)

1 object(s) - format STL
O-ring STL 3D file ID 9.4 × CS 5.3 mm
STL model of O-ring with dimensions ID (inner diameter) 9.4 mm × section thickness 5.3  mm. Final diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 9.4 mm
cross section (CS) 5.3 mm

O'ring STL 3D file ID 9.4 × CS 4.6 mm (📦 #3115)

1 object(s) - format STL
o'ring STL 3D file ID 9.4 × CS 4.6 mm
3D file in STL format of O-ring with ID (inner diameter) 9.4 mm × CS 4.6  mm. The outer diameter resulting is 18.6 mm.
Parameter Value Unit
inner diameter (ID) 9.4 mm
cross section (CS) 4.6 mm

O-ring STL file ID 9.4 × CS 4 mm (📦 #3117)

1 object(s) - format STL
O-ring STL file ID 9.4 × CS 4 mm
3D file of sealing ring with ID 9.4 mm × CS 4  mm. Outer diameter (OD) resulting is 17.4 mm.
Parameter Value Unit
inner diameter (ID) 9.4 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 9.6 × CS 5.3 mm (📦 #3087)

1 object(s) - format STL
O-ring STL 3D file ID 9.6 × CS 5.3 mm
3D file in STL format of O-ring with ID (inner diameter) 9.6 mm by thickness 5.3  mm. The outer diameter resulting corresponds to 20.2 mm.
Parameter Value Unit
inner diameter (ID) 9.6 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 9.7 × CS 1.9 mm (📦 #3228)

1 object(s) - format STL
O-ring STL 3D file ID 9.7 × CS 1.9 mm
3D model of rubber ring with dimensions Inner diameter (ID) 9.7 mm × section thickness 1.9  mm. External diameter (OD) is 13.5 mm.
Parameter Value Unit
inner diameter (ID) 9.7 mm
cross section (CS) 1.9 mm
Can't find the right model? Create it with your specs