Custom Clip-on pipe support Ø86 mm STL 3D file · Countersunk screw Ø6 mm 📦#8045
Generation date: 2026-03-26
3D model download
Free- pipe-clip-holder-dia86mm-hod6m_model8045-nb0_dd{id}.stl : 164.9 Ko
STL
Mesh quality :
0.001
0.1
No compliance warranty
License: ITE IPU v1.0 - Iteration3d
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download
Values for this model
This model was generated by the Pipe clip holder template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | tube diameter | 86 mm (≃3 3/8 in) |
| #2 | hole diameter | 6 mm (≃1/4 in) |
| #3 | countersunk screw | yes |
| Metadata | Value |
|---|---|
| width | 17.9 mm (≃0.70 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 tube diameter | dia |
| #2 hole diameter | hod |
| #3 countersunk screw | scrT |
Related 3D models
To search for a model based on your own parameters, go to the template page Pipe clip holder
Clip-on pipe support Ø85 mm STL file · Countersunk screw Ø6 mm (📦 #4811)
1 object(s) - format STL
Download this 3D file of a Ø85 mm snap-on pipe mount in STL format. The fastening is performed by means of a large countersunk screw Ø6 mm. This pipe clip mount is intended for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 85 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø90 mm STL file · Flat head screw Ø6 mm (📦 #3648)
1 object(s) - format STL
Download this 3D file of a Ø90 mm clip-on pipe holder in STL format. The installation is achieved by means of a sturdy countersunk screw Ø6 mm. This snap-on pipe clip is built for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 90 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Tube clip Ø79 mm STL file · Countersunk screw Ø6 mm (📦 #3720)
1 object(s) - format STL
3D model of a Ø79 mm clip-on tube holder in STL format. The fastening is designed with a heavy-duty countersunk screw Ø6 mm. This snap-on pipe mount is intended for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 79 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Tube clip holder Ø73 mm STL file · Countersunk screw Ø6 mm (📦 #4652)
1 object(s) - format STL
Download this 3D file of a Ø73 mm snap-on pipe clip in STL format. The mounting is achieved using a heavy-duty flat head screw Ø6 mm. This snap-on pipe mount is designed for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 73 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Pipe clip Ø100 mm STL file · Flat head screw Ø6 mm (📦 #3846)
1 object(s) - format STL
Download this 3D file of a Ø100 mm pipe clip mount in STL format. The fastening is done by means of a heavy-duty flat head screw Ø6 mm. This clip-on pipe support is designed for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 100 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Clip-on tube support Ø110 mm STL file · Flat head screw Ø6 mm (📦 #4879)
1 object(s) - format STL
3D model of a Ø110 mm pipe clip holder in STL format. The installation is achieved by means of a sturdy countersunk screw Ø6 mm. This custom pipe holder is built for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 110 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Tube support clip Ø60 mm STL 3D file · Countersunk screw Ø6 mm (📦 #3632)
1 object(s) - format STL
3D model of a Ø60 mm custom pipe clip in STL format. The mounting is done by means of a heavy-duty flat head screw Ø6 mm. This snap-on pipe clip is built for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 60 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Pipe clip Ø80 mm STL 3D file · Flat head screw Ø5 mm (📦 #3309)
1 object(s) - format STL
3D model of a Ø80 mm pipe clip holder in STL format. The fastening is achieved by means of a countersunk screw Ø5 mm. This pipe clip is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 80 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø80 mm STL file · Countersunk screw Ø7 mm (📦 #4810)
1 object(s) - format STL
Download this 3D model of a Ø80 mm pipe clip mount in STL format. The mounting is designed by means of a heavy-duty flat head screw Ø7 mm. This pipe clip mount is intended for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 80 | mm |
| hole diameter | 7 | mm |
| countersunk screw | yes |
Pipe support clip Ø93 mm STL file · Flat head screw Ø5 mm (📦 #7067)
1 object(s) - format STL
3D model of a Ø93 mm snap-on pipe mount in STL format. The fastening is achieved using a flat head screw Ø5 mm. This clip-on pipe holder is built for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 93 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø76 mm STL 3D file · Countersunk screw Ø5 mm (📦 #4662)
1 object(s) - format STL
Download this 3D file of a Ø76 mm custom pipe clip in STL format. The fastening is performed with a flat head screw Ø5 mm. This snap-on pipe mount is intended for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 76 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø75 mm STL 3D file · Flat head screw Ø5 mm (📦 #3536)
1 object(s) - format STL
Download this 3D model of a Ø75 mm clip-on pipe support in STL format. The installation is achieved using a countersunk screw Ø5 mm. This snap-on pipe clip is built for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 75 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø100 mm STL 3D file · Countersunk screw Ø7 mm (📦 #4824)
1 object(s) - format STL
Download this 3D file of a Ø100 mm pipe clip holder in STL format. The mounting is performed with a large flat head screw Ø7 mm. This pipe support clip is built for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 100 | mm |
| hole diameter | 7 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø100 mm STL file · Countersunk screw Ø5 mm (📦 #3651)
1 object(s) - format STL
Download this 3D model of a Ø100 mm clip-on tube holder in STL format. The fastening is designed by means of a countersunk screw Ø5 mm. This clip-on pipe mount is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 100 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø102 mm STL file · Countersunk screw Ø5 mm (📦 #4163)
1 object(s) - format STL
Download this 3D model of a Ø102 mm pipe clip holder in STL format. The installation is designed using a countersunk screw Ø5 mm. This custom pipe clip is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 102 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø103 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6011)
1 object(s) - format STL
Download this 3D file of a Ø103 mm custom pipe holder in STL format. The mounting is achieved by means of a flat head screw Ø5 mm. This snap-on pipe mount is intended for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 103 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe holder Ø68 mm STL file · Countersunk screw Ø5 mm (📦 #5260)
1 object(s) - format STL
Download this 3D model of a Ø68 mm custom pipe clip in STL format. The installation is achieved with a flat head screw Ø5 mm. This pipe support clip is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 68 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø105 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6140)
1 object(s) - format STL
Download this 3D file of a Ø105 mm clip-on tube holder in STL format. The mounting is done using a flat head screw Ø5 mm. This pipe support clip is built for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 105 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø67 mm STL file · Countersunk screw Ø5 mm (📦 #6571)
1 object(s) - format STL
3D model of a Ø67 mm pipe support clip in STL format. The mounting is achieved with a flat head screw Ø5 mm. This clip-on tube holder is designed for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 67 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø65 mm STL 3D file · Flat head screw Ø5 mm (📦 #5261)
1 object(s) - format STL
Download this 3D file of a Ø65 mm pipe support clip in STL format. The mounting is done by means of a flat head screw Ø5 mm. This clip-on tube holder is built for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 65 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø110 mm STL file · Flat head screw Ø5 mm (📦 #5026)
1 object(s) - format STL
3D model of a Ø110 mm clip-on pipe support in STL format. The installation is achieved by means of a flat head screw Ø5 mm. This pipe clip is designed for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 110 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe clip Ø127 mm STL file · Countersunk screw Ø6 mm (📦 #5584)
1 object(s) - format STL
Download this 3D model of a Ø127 mm pipe support clip in STL format. The installation is performed with a heavy-duty countersunk screw Ø6 mm. This clip-on pipe mount is designed for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 127 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø111 mm STL file · Flat head screw Ø5 mm (📦 #7380)
1 object(s) - format STL
3D model of a Ø111 mm pipe clip in STL format. The mounting is designed using a flat head screw Ø5 mm. This pipe clip mount is intended for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 111 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø60 mm STL file · Flat head screw Ø5 mm (📦 #4160)
1 object(s) - format STL
Download this 3D model of a Ø60 mm snap-on pipe clip in STL format. The fastening is performed with a countersunk screw Ø5 mm. This custom pipe clip is intended for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 60 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø59 mm STL 3D file · Countersunk screw Ø5 mm (📦 #4665)
1 object(s) - format STL
Download this 3D model of a Ø59 mm clip-on pipe holder in STL format. The installation is performed using a countersunk screw Ø5 mm. This pipe clip mount is built for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 59 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø118 mm STL 3D file · Countersunk screw Ø5 mm (📦 #6943)
1 object(s) - format STL
Download this 3D model of a Ø118 mm snap-on tube holder in STL format. The mounting is designed with a flat head screw Ø5 mm. This clip-on pipe support is intended for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 118 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø53 mm STL file · Flat head screw Ø5 mm (📦 #6572)
1 object(s) - format STL
Download this 3D file of a Ø53 mm clip-on pipe holder in STL format. The mounting is performed by means of a flat head screw Ø5 mm. This snap-on tube holder is intended for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 53 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe clip holder Ø50 mm STL file · Countersunk screw Ø5 mm (📦 #3203)
1 object(s) - format STL
Download this 3D model of a Ø50 mm custom pipe clip in STL format. The installation is designed using a flat head screw Ø5 mm. This custom pipe holder is built for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 50 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø48 mm STL file · Countersunk screw Ø5 mm (📦 #5439)
1 object(s) - format STL
Download this 3D model of a Ø48 mm clip-on pipe mount in STL format. The mounting is performed using a countersunk screw Ø5 mm. This custom pipe holder is intended for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 48 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø44 mm STL 3D file · Flat head screw Ø5 mm (📦 #5732)
1 object(s) - format STL
3D model of a Ø44 mm custom pipe holder in STL format. The mounting is done with a countersunk screw Ø5 mm. This custom pipe clip is designed for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 44 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |