Custom Star-pattern fitting 3 tubes STL 3D model – Outer diameter 168 mm, wall thickness 22 mm 📦#4815

This STL 3D ways distribution manifold with 3 ways is available for download. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The branch sections accept tubes with an outer diameter of 150 mm and provide an internal passage of 147 mm. This thickness (1.5 mm) corresponds to a thin wall. No end fillets are applied, so both the inner and outer edges remain sharp. The model could be adapted for custom installations, hose routing, or technical projects that need a compact distribution fitting.

Download this STL 3D multi-hoses fitting model with 3 hoses. The three branches are arranged evenly, with an angular step of 120° between each outlet. Each branch is sized for tubes with an outer diameter of 125 mm and an inner diameter of 120 mm. The wall has a thickness of 2.5 mm. The ends are left without fillets, with raw inner and outer edges. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

STL 3D file of a ways distribution manifold with 3 ways, ready to download. The three branches are arranged evenly, with an angular step of 120° between each outlet. Each branch is sized for tubes with an outer diameter of 103 mm and an inner diameter of 100 mm. This thickness (1.5 mm) corresponds to a thin wall. The ends are left without fillets, with raw inner and outer edges. The model could be adapted for custom installations, hose routing, or technical projects that need a compact distribution fitting.

3D STL model of a multi-hoses fitting with 3 hoses, ready to use in your projects. The connector has a Y-shaped layout with 3 hoses, spaced 120° apart around the center axis. The connector is designed for tubes with a 101.6 mm outer diameter and a 98.6 mm inner diameter. The wall is thin, with a thickness of 1.5 mm. The tube ends stay straight, with no internal or external fillets. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

3D STL model of a multi-way hoses manifold with 3 hoses, ready to use in your projects. This Y-style model provides 3 hoses, each separated by 120° for a balanced flow split. Each branch is sized for tubes with an outer diameter of 100 mm and an inner diameter of 94 mm. The wall thickness is 3 mm. The ends are left without fillets, with raw inner and outer edges. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

STL 3D file of a multi-ways connector with 3 ways, ready to download. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. Each branch is sized for tubes with an outer diameter of 100 mm and an inner diameter of 92 mm. The wall thickness is 4 mm. No end fillets are applied, so both the inner and outer edges remain sharp. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

This STL 3D hoses distribution manifold with 3 hoses is available for download. The three branches are arranged evenly, with an angular step of 120° between each outlet. The branch sections accept tubes with an outer diameter of 103 mm and provide an internal passage of 100 mm. This thickness (1.5 mm) corresponds to a thin wall. The internal edges at each branch end are softened with fillets to help guide the tube during assembly. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

3D STL model of a multi-ways connector with 3 ways, ready to use in your projects. The connector has a Y-shaped layout with 3 ways, spaced 120° apart around the center axis. Each branch is sized for tubes with an outer diameter of 95 mm and an inner diameter of 89 mm. This model uses a wall of 3 mm. The tube ends stay straight, with no internal or external fillets. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

This STL 3D multi-way hoses manifold with 3 hoses is available for download. The connector has a Y-shaped layout with 3 hoses, spaced 120° apart around the center axis. Each branch is sized for tubes with an outer diameter of 100 mm and an inner diameter of 75.2 mm. The connector has a very thick wall (12.4 mm). The ends are left without fillets, with raw inner and outer edges. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

STL 3D file of a multi-ways fitting with 4 ways, ready to download. The connector uses a cross-shaped layout, with 4 ways set 90° from one another. The branch sections accept tubes with an outer diameter of 90 mm and provide an internal passage of 84 mm. The wall has a thickness of 3 mm. No end fillets are applied, so both the inner and outer edges remain sharp. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

STL 3D file of a multi-way ways manifold with 3 ways, ready to download. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The connector is designed for tubes with a 204 mm outer diameter and a 200 mm inner diameter. The connector features a thin wall (2 mm). No end fillets are applied, so both the inner and outer edges remain sharp. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

STL 3D file of a ways distribution manifold with 3 ways, ready to download. The connector has a Y-shaped layout with 3 ways, spaced 120° apart around the center axis. The branch sections accept tubes with an outer diameter of 200 mm and provide an internal passage of 196 mm. This thickness (2 mm) corresponds to a thin wall. The internal edges at each branch end are softened with fillets to help guide the tube during assembly. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

Download this STL 3D multi-ways connector model with 3 ways. The three branches are arranged evenly, with an angular step of 120° between each outlet. Each branch is sized for tubes with an outer diameter of 80 mm and an inner diameter of 78 mm. This part uses a very thin wall (1 mm). No end fillets are applied, so both the inner and outer edges remain sharp. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

Download this STL 3D multi-ways fitting model with 3 ways. The connector has a Y-shaped layout with 3 ways, spaced 120° apart around the center axis. Each branch is sized for tubes with an outer diameter of 76 mm and an inner diameter of 72 mm. The wall is thin, with a thickness of 2 mm. The tube ends stay straight, with no internal or external fillets. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

Download this STL 3D hoses distribution manifold model with 3 hoses. The connector has a Y-shaped layout with 3 hoses, spaced 120° apart around the center axis. The connector is designed for tubes with a 103 mm outer diameter and a 101 mm inner diameter. This part uses a very thin wall (1 mm). The external edges at each branch end are softened with fillets, which helps when inserting into an existing duct. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

Download this STL 3D ways distribution manifold model with 4 ways. The connector uses a cross-shaped layout, with 4 ways set 90° from one another. The branch sections accept tubes with an outer diameter of 100 mm and provide an internal passage of 90 mm. The external edges at each branch end are softened with fillets, which helps when inserting into an existing duct. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

Download this STL 3D multi-ways connector model with 3 ways. The three branches are arranged evenly, with an angular step of 120° between each outlet. The connector is designed for tubes with a 200 mm outer diameter and a 194 mm inner diameter. This model uses a wall of 3 mm. The external edges at each branch end are softened with fillets, which helps when inserting into an existing duct. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

STL 3D file of a tubes distribution manifold with 3 tubes, ready to download. The connector has a Y-shaped layout with 3 tubes, spaced 120° apart around the center axis. The branch sections accept tubes with an outer diameter of 63 mm and provide an internal passage of 57 mm. The wall thickness is 3 mm. No end fillets are applied, so both the inner and outer edges remain sharp. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

STL 3D file of a multi-ways fitting with 3 ways, ready to download. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The branch sections accept tubes with an outer diameter of 62 mm and provide an internal passage of 57.5 mm. The wall has a thickness of 2.25 mm. The tube ends stay straight, with no internal or external fillets. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

3D STL model of a multi-way ways manifold with 3 ways, ready to use in your projects. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The connector is designed for tubes with a 62 mm outer diameter and a 57 mm inner diameter. The wall has a thickness of 2.5 mm. The ends are left without fillets, with raw inner and outer edges. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

Download this STL 3D multi-way ways manifold model with 3 ways. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The connector is designed for tubes with a 60 mm outer diameter and a 58 mm inner diameter. A wall thickness of 1 mm corresponds to a very thin shell. The ends are left without fillets, with raw inner and outer edges. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

STL 3D file of a multi-way ways manifold with 3 ways, ready to download. The connector has a Y-shaped layout with 3 ways, spaced 120° apart around the center axis. The connector is designed for tubes with a 80 mm outer diameter and a 76 mm inner diameter. The connector features a thin wall (2 mm). The external edges at each branch end are softened with fillets, which helps when inserting into an existing duct. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

This STL 3D multi-ways fitting with 3 ways is available for download. The connector has a Y-shaped layout with 3 ways, spaced 120° apart around the center axis. The connector is designed for tubes with a 75.5 mm outer diameter and a 72 mm inner diameter. The wall is thin, with a thickness of 1.75 mm. External fillets are added at the ends to make it easier to slip the connector into ducts or hoses. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

3D STL model of a multi-ways fitting with 3 ways, ready to use in your projects. The three branches are arranged evenly, with an angular step of 120° between each outlet. The connector is designed for tubes with a 120 mm outer diameter and a 110 mm inner diameter. The internal and external edges at each branch end are softened, which makes assembly more comfortable. The model could be adapted for custom installations, hose routing, or technical projects that need a compact distribution fitting.

Download this STL 3D multi-ways connector model with 3 ways. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The branch sections accept tubes with an outer diameter of 51 mm and provide an internal passage of 45 mm. The wall thickness is 3 mm. The ends are left without fillets, with raw inner and outer edges. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

3D STL model of a tubes distribution manifold with 3 tubes, ready to use in your projects. The connector has a Y-shaped layout with 3 tubes, spaced 120° apart around the center axis. Each branch is sized for tubes with an outer diameter of 50 mm and an inner diameter of 46 mm. This thickness (2 mm) corresponds to a thin wall. The ends are left without fillets, with raw inner and outer edges. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

STL 3D file of a multi-ways fitting with 3 ways, ready to download. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The branch sections accept tubes with an outer diameter of 42 mm and provide an internal passage of 38 mm. This thickness (2 mm) corresponds to a thin wall. The ends are left without fillets, with raw inner and outer edges. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.