?>

Custom Pipe elbow STL 3D file 60° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm 📦#3549

STL Download STL 1
Create a new model:
from scratch search for a model
3D file of a pipe elbow with a 60° angle in STL format. This pipe elbow features an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Generation date: 2025-11-22
3D Model Pipe elbow STL 3D file 60° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm

3D model download

Free
  • pipe-elbow-ouD40mm-inD34mm-deg_model3549-nb0_dd{id}.stl : 590.7 Ko
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 40 mm (≃1 9/16 in)
#2 inner diameter 34 mm (≃1.34 in)
#3 angle 60 °
#4 end fillets no
Metadata Value
Tube wall thickness 3 mm (≃1/8 in)
illustration of the parameters
Parameter overview

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow STL file 60° ⌀OD: 50 mm ⌀ID: 40.5 mm thickness: 4.75 mm (📦 #1909)

1 object(s) - format STL
Pipe elbow STL file 60° ⌀OD: 50 mm ⌀ID: 40.5 mm thickness: 4.75 mm
3D model of an elbow with a 60° angle in STL format. This elbow has an external diameter of 50 mm and an internal diameter of 40.5 mm. This results in a tube thickness of 4.75 mm.
Parameter Value Unit
outer diameter 50 mm
inner diameter 40.5 mm
angle 60 °
end fillets no

Pipe elbow STL 3D file 60° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1406)

1 object(s) - format STL
Pipe elbow STL 3D file 60° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
3D file of a pipe elbow with a 60° angle in STL format. This elbow has an outer diameter of 28 mm and an inner diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 28 mm
inner diameter 26 mm
angle 60 °
end fillets no

Tube elbow STL file 55° ⌀OD: 29 mm ⌀ID: 25 mm thickness: 2 mm (📦 #2695)

1 object(s) - format STL
Tube elbow STL file 55° ⌀OD: 29 mm ⌀ID: 25 mm thickness: 2 mm
Model of a tubing elbow with a 55° angle in STL format. This elbow features an outer diameter of 29 mm and an inner diameter of 25 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 29 mm
inner diameter 25 mm
angle 55 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1401)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of an elbow with a 45° angle in STL format. This elbow has an external diameter of 40 mm and an internal diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 45 °
end fillets no

Tube elbow STL 3D file 45° ⌀OD: 35 mm ⌀ID: 30 mm thickness: 2.5 mm (📦 #2763)

1 object(s) - format STL
Tube elbow STL 3D file 45° ⌀OD: 35 mm ⌀ID: 30 mm thickness: 2.5 mm
3D model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an outer diameter of 35 mm and an inner diameter of 30 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 35 mm
inner diameter 30 mm
angle 45 °
end fillets no

Pipe elbow STL 3D file 70° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1405)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
Model of an elbow with a 70° angle in STL format. This pipe elbow has an outer diameter of 28 mm and an inner diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 28 mm
inner diameter 26 mm
angle 70 °
end fillets no

Pipe elbow STL file 70° ⌀OD: 27.5 mm ⌀ID: 26 mm thickness: 0.75 mm (📦 #1404)

1 object(s) - format STL
Pipe elbow STL file 70° ⌀OD: 27.5 mm ⌀ID: 26 mm thickness: 0.75 mm
3D model of a pipe elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 27.5 mm and an inner diameter of 26 mm. This results in a tube thickness of 0.75 mm.
Parameter Value Unit
outer diameter 27.5 mm
inner diameter 26 mm
angle 70 °
end fillets no

Tube elbow STL file 45° ⌀OD: 46.5 mm ⌀ID: 41.5 mm thickness: 2.5 mm (📦 #2926)

1 object(s) - format STL
Tube elbow STL file 45° ⌀OD: 46.5 mm ⌀ID: 41.5 mm thickness: 2.5 mm
File of a pipe elbow with a 45° angle in STL format. This pipe elbow features an outer diameter of 46.5 mm and an inner diameter of 41.5 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 46.5 mm
inner diameter 41.5 mm
angle 45 °
end fillets no

Tubing elbow STL 3D file 45° ⌀OD: 32 mm ⌀ID: 27 mm thickness: 2.5 mm (📦 #2760)

1 object(s) - format STL
Tubing elbow STL 3D file 45° ⌀OD: 32 mm ⌀ID: 27 mm thickness: 2.5 mm
File of a pipe elbow with a 45° angle in STL format. This elbow has an outer diameter of 32 mm and an inner diameter of 27 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 27 mm
angle 45 °
end fillets no

Tubing elbow STL file 45° ⌀OD: 32 mm ⌀ID: 26 mm thickness: 3 mm (📦 #2688)

1 object(s) - format STL
Tubing elbow STL file 45° ⌀OD: 32 mm ⌀ID: 26 mm thickness: 3 mm
Model of a pipe elbow with a 45° angle in STL format. This elbow has an outer diameter of 32 mm and an inner diameter of 26 mm. The tube thickness is therefore 3 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 26 mm
angle 45 °
end fillets no

Tube elbow STL 3D file 60° ⌀OD: 25 mm ⌀ID: 20 mm thickness: 2.5 mm (📦 #3551)

1 object(s) - format STL
Tube elbow STL 3D file 60° ⌀OD: 25 mm ⌀ID: 20 mm thickness: 2.5 mm
Model of a pipe elbow with a 60° angle in STL format. This pipe elbow features an outer diameter of 25 mm and an inner diameter of 20 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 25 mm
inner diameter 20 mm
angle 60 °
end fillets no

Tubing elbow STL 3D file 45° ⌀OD: 29 mm ⌀ID: 25 mm thickness: 2 mm (📦 #2689)

1 object(s) - format STL
Tubing elbow STL 3D file 45° ⌀OD: 29 mm ⌀ID: 25 mm thickness: 2 mm
3D file of a pipe elbow with a 45° angle in STL format. This elbow features an outer diameter of 29 mm and an inner diameter of 25 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 29 mm
inner diameter 25 mm
angle 45 °
end fillets no

Pipe elbow STL file 75° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1407)

1 object(s) - format STL
Pipe elbow STL file 75° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
File of a pipe elbow with a 75° angle in STL format. This elbow has an external diameter of 28 mm and an internal diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 28 mm
inner diameter 26 mm
angle 75 °
end fillets no

Pipe elbow STL file 80° ⌀OD: 48.3 mm ⌀ID: 42.1 mm thickness: 3.1 mm (📦 #2126)

1 object(s) - format STL
Pipe elbow STL file 80° ⌀OD: 48.3 mm ⌀ID: 42.1 mm thickness: 3.1 mm
Model of a pipe elbow with an 80° angle in STL format. This elbow has an external diameter of 48.3 mm and an internal diameter of 42.1 mm. This results in a tube thickness of 3.1 mm.
Parameter Value Unit
outer diameter 48.3 mm
inner diameter 42.1 mm
angle 80 °
end fillets no

Pipe elbow STL 3D file 60° ⌀OD: 21 mm ⌀ID: 20 mm thickness: 0.5 mm (📦 #1822)

1 object(s) - format STL
Pipe elbow STL 3D file 60° ⌀OD: 21 mm ⌀ID: 20 mm thickness: 0.5 mm
File of an elbow with a 60° angle in STL format. This pipe elbow features an external diameter of 21 mm and an internal diameter of 20 mm. This results in a tube thickness of 0.5 mm.
Parameter Value Unit
outer diameter 21 mm
inner diameter 20 mm
angle 60 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 26 mm ⌀ID: 20 mm thickness: 3 mm (📦 #2759)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 26 mm ⌀ID: 20 mm thickness: 3 mm
Model of a tubing elbow with a 45° angle in STL format. This pipe elbow features an outer diameter of 26 mm and an inner diameter of 20 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 26 mm
inner diameter 20 mm
angle 45 °
end fillets no

Tubing elbow STL 3D file 45° ⌀OD: 55 mm ⌀ID: 50 mm thickness: 2.5 mm (📦 #3456)

1 object(s) - format STL
Tubing elbow STL 3D file 45° ⌀OD: 55 mm ⌀ID: 50 mm thickness: 2.5 mm
File of a tubing elbow with a 45° angle in STL format. This elbow features an external diameter of 55 mm and an internal diameter of 50 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 55 mm
inner diameter 50 mm
angle 45 °
end fillets no

Tubing elbow STL 3D file 45° ⌀OD: 54.8 mm ⌀ID: 50.8 mm thickness: 2 mm (📦 #3264)

1 object(s) - format STL
Tubing elbow STL 3D file 45° ⌀OD: 54.8 mm ⌀ID: 50.8 mm thickness: 2 mm
3D file of an elbow with a 45° angle in STL format. This pipe elbow features an outer diameter of 54.8 mm and an inner diameter of 50.8 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 54.8 mm
inner diameter 50.8 mm
angle 45 °
end fillets no

Pipe elbow STL file 45° ⌀OD: 35 mm ⌀ID: 11 mm thickness: 12 mm (📦 #2240)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 35 mm ⌀ID: 11 mm thickness: 12 mm
3D model of a pipe elbow with a 45° angle in STL format. This elbow has an external diameter of 35 mm and an internal diameter of 11 mm. This results in a tube thickness of 12 mm.
Parameter Value Unit
outer diameter 35 mm
inner diameter 11 mm
angle 45 °
end fillets no

Pipe elbow STL 3D file 60° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm (📦 #2143)

1 object(s) - format STL
Pipe elbow STL 3D file 60° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm
3D model of an elbow with a 60° angle in STL format. This elbow features an outer diameter of 18 mm and an inner diameter of 15 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 15 mm
angle 60 °
end fillets no

Pipe elbow STL 3D file 70° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1665)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
3D model of an elbow with a 70° angle in STL format. This elbow features an external diameter of 18 mm and an internal diameter of 16 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 70 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1367)

1 object(s) - format STL (5.0/5) 1 vote(s)
Pipe elbow STL 3D file 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 40 mm ⌀ID: 35 mm thickness: 2.5 mm (📦 #2162)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 40 mm ⌀ID: 35 mm thickness: 2.5 mm
Model of a pipe elbow with a 90° angle in STL format. This elbow has an outer diameter of 40 mm and an inner diameter of 35 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 35 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 38 mm ⌀ID: 35 mm thickness: 1.5 mm (📦 #2344)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 38 mm ⌀ID: 35 mm thickness: 1.5 mm
Model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 38 mm and an inner diameter of 35 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 38 mm
inner diameter 35 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm (📦 #1552)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm
3D file of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 43 mm and an inner diameter of 39.2 mm. This results in a tube thickness of 1.9 mm.
Parameter Value Unit
outer diameter 43 mm
inner diameter 39.2 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 44 mm ⌀ID: 39 mm thickness: 2.5 mm (📦 #3439)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 44 mm ⌀ID: 39 mm thickness: 2.5 mm
3D model of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 44 mm and an inner diameter of 39 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 44 mm
inner diameter 39 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 45.7 mm ⌀ID: 40.7 mm thickness: 2.5 mm (📦 #2051)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 45.7 mm ⌀ID: 40.7 mm thickness: 2.5 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 45.7 mm and an inner diameter of 40.7 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 45.7 mm
inner diameter 40.7 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm (📦 #2125)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 32 mm and an inner diameter of 30 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 30 mm
angle 90 °
end fillets no

Tube elbow STL file 90° ⌀OD: 31.5 mm ⌀ID: 30 mm thickness: 0.75 mm (📦 #3083)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 31.5 mm ⌀ID: 30 mm thickness: 0.75 mm
3D model of an elbow with a 90° angle in STL format. This elbow features an external diameter of 31.5 mm and an internal diameter of 30 mm. This results in a tube thickness of 0.75 mm.
Parameter Value Unit
outer diameter 31.5 mm
inner diameter 30 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 45 mm ⌀ID: 42 mm thickness: 1.5 mm (📦 #2536)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 45 mm ⌀ID: 42 mm thickness: 1.5 mm
3D file of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 45 mm and an inner diameter of 42 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 45 mm
inner diameter 42 mm
angle 90 °
end fillets no