?>

Custom Round air vent STL file ∅ 104 mm, slat angle: 25° with central reinforcement 📦#3353

STL Download STL 1
Create a new model:
from scratch search for a model
3D file of a round grille for air circulation in STL format. Its insertion diameter is 104 mm. The slats have a slight angle of 25° and a low thickness of 1.6 mm. A central reinforcement reinforces the slats. This aeration grille features a thin flange of 4 mm. The total diameter of this model is 112 mm.
Generation date: 2025-11-17
3D Model Round air vent STL file ∅ 104 mm, slat angle: 25° with central reinforcement

3D model download

Free
  • round-air-vent-dia104mm-slD25d_model3353-nb0_dd{id}.stl : 8.1 Mo
STL Mesh quality : Linear deflection 0.1 Angular deflection 0.1
No compliance warranty No compliance warranty
(attribution - non commercial use - no derivatives)
Safe download

Values for this model

This model was generated by the Round air vent grill template, with the following values:
Parameter Value
#1 male diameter 104 mm (≃4.09 in)
#2 slat angle 25 °
#3 slat thickness 1.6 mm (≃1/16 in)
#4 flange width 4 mm (≃0.16 in)
#5 central reinforcement yes
Metadata Value
Total diameter (including flange) 112 mm (≃4.41 in)
Total thickness 25 mm (≃0.98 in)
illustration of the parameters
Parameter overview

  • The total thickness of the vent is 25 mm.
  • Whatever the parameters, the slats never overlap. This ensures an optimal airflow. At the same time, the slats form an almost opaque screen along the axis.
  • The slats are actually shaped as parallelograms rather than rectangles. This ensures better printability.
  • The slats and the central reinforcement (if present) feature a 0.40 mm fillet on all edges. This improves airflow and prevents potential whistling.
  • The collar, if present, is 3 mm thick and has a 2 mm fillet for aesthetic purposes.
  • The male insertion area is 3 mm thick and has a 1 mm fillet on both edges to facilitate insertion into the intended slot.
  • The central reinforcement, if present, is 2 mm thick and spans the entire projected width of the slats.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 male diameter dia
#2 slat angle slD
#3 slat thickness slT
#4 flange width flW
#5 central reinforcement renf

Related 3D models

To search for a model based on your own parameters, go to the template page Round air vent grill 

Round air vent STL file ∅ 110 mm, slat angle: 25° with central reinforcement (📦 #3354)

1 object(s) - format STL
Round air vent STL file ∅ 110 mm, slat angle: 25° with central reinforcement
3D design of a round air vent for air circulation in STL format. Its male diameter is 110 mm. The slats have a slight angle of 25° and a low thickness of 1.6 mm. A central reinforcement reinforces the whole structure. This 3D aeration grille features a thin flange of 4 mm. The overall diameter of the model is 118 mm.
Parameter Value Unit
male diameter 110 mm
slat angle 25 °
slat thickness 1.6 mm
flange width 4 mm
central reinforcement yes

Round air vent STL file ∅ 93.6 mm, slat angle: 30° with central reinforcement (📦 #1327)

1 object(s) - format STL
Round air vent STL file ∅ 93.6 mm, slat angle: 30° with central reinforcement
File of a round air vent for ventilation in STL format. Its male diameter measures 93.6 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A vertical reinforcement secures the slats. This vent grille has a thin flange of 3 mm. The overall diameter of the model is 99.6 mm.
Parameter Value Unit
male diameter 93.6 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 3 mm
central reinforcement yes

Round air vent STL file ∅ 100 mm, slat angle: 30° with central reinforcement (📦 #2746)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 30° with central reinforcement
Design of a round air vent for air circulation in STL format. Its male diameter measures 100 mm. The slats have a slight angle of 30° and a high thickness of 1.8 mm. A centered vertical reinforcement secures the whole structure. This 3D aeration grille features a thin flange of 5 mm. The full diameter of this model is 110 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 30 °
slat thickness 1.8 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement (📦 #2062)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement
Model of a round grille for air circulation in STL format. Its male diameter measures 92 mm. The slats have a slight angle of 30° and a low thickness of 1.4 mm. A central reinforcement reinforces the whole structure. This 3D vent grille has a thin flange of 5 mm. The full diameter of this model is 102 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 30 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 91.9 mm, slat angle: 20° with central reinforcement (📦 #2303)

1 object(s) - format STL
Round air vent STL file ∅ 91.9 mm, slat angle: 20° with central reinforcement
File of a round air vent for ventilation in STL format. Its insertion diameter measures 91.9 mm. The slats have a slight angle of 20° and a low thickness of 1.4 mm. A vertical reinforcement secures the slats. This vent cover has a thin flange of 5 mm. The full diameter of the model is 101.9 mm.
Parameter Value Unit
male diameter 91.9 mm
slat angle 20 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 100 mm, slat angle: 33° with central reinforcement (📦 #3843)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 33° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its insertion diameter is 100 mm. The slats have an angle of 33° and a high thickness of 1.8 mm. A vertical reinforcement strengthens the slats. This vent cover features a thin flange of 5 mm. The total diameter of the model is 110 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 33 °
slat thickness 1.8 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 90 mm, slat angle: 35° with central reinforcement (📦 #1320)

1 object(s) - format STL
Round air vent STL 3D file ∅ 90 mm, slat angle: 35° with central reinforcement
3D design of a round grille for ventilation in STL format. Its male diameter is 90 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the whole structure. This 3D aeration grille features no flange.
Parameter Value Unit
male diameter 90 mm
slat angle 35 °
slat thickness 1.6 mm
flange width 0 mm
central reinforcement yes

Round air vent STL 3D file ∅ 140 mm, slat angle: 15° with central reinforcement (📦 #1296)

1 object(s) - format STL
Round air vent STL 3D file ∅ 140 mm, slat angle: 15° with central reinforcement
File of a round vent cover for air circulation in STL format. Its insertion diameter is 140 mm. The slats have a slight angle of 15° and a low thickness of 1.6 mm. A central reinforcement reinforces the whole structure. This 3D vent cover has a collar of 6 mm. The full diameter of this model is 152 mm.
Parameter Value Unit
male diameter 140 mm
slat angle 15 °
slat thickness 1.6 mm
flange width 6 mm
central reinforcement yes

Round air vent STL 3D file ∅ 100 mm, slat angle: 18° with central reinforcement (📦 #3853)

1 object(s) - format STL
Round air vent STL 3D file ∅ 100 mm, slat angle: 18° with central reinforcement
Design of a round grille for ventilation in STL format. Its male diameter measures 100 mm. The slats have a slight angle of 18° and a high thickness of 1.9 mm. A central reinforcement reinforces the slats. This vent grille features a thin flange of 3 mm. The full diameter of this model is 106 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 18 °
slat thickness 1.9 mm
flange width 3 mm
central reinforcement yes

Round air vent STL file ∅ 100 mm, slat angle: 10° with central reinforcement (📦 #2940)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 10° with central reinforcement
3D design of a round grille for ventilation in STL format. Its male diameter measures 100 mm. The slats have a slight angle of 10° and a low thickness of 1.4 mm. A vertical reinforcement secures the slats. This 3D vent grille features a thin flange of 3 mm. The total diameter of this model is 106 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 10 °
slat thickness 1.4 mm
flange width 3 mm
central reinforcement yes

Round air vent STL file ∅ 146 mm, slat angle: 30° with central reinforcement (📦 #3065)

1 object(s) - format STL
Round air vent STL file ∅ 146 mm, slat angle: 30° with central reinforcement
Design of a round grille for air circulation in STL format. Its insertion diameter measures 146 mm. The slats have a slight angle of 30° and a low thickness of 1.4 mm. A centered vertical reinforcement secures the whole structure. This 3D vent grille has a flange of 8 mm. The total diameter of this model is 162 mm.
Parameter Value Unit
male diameter 146 mm
slat angle 30 °
slat thickness 1.4 mm
flange width 8 mm
central reinforcement yes

Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #1322)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement
3D design of a round vent cover for ventilation in STL format. Its male diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the whole structure. This ventilation grille has a thin flange of 3 mm. The full diameter of this model is 156 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 40 °
slat thickness 1.6 mm
flange width 3 mm
central reinforcement yes

Round air vent STL file ∅ 104.6 mm, slat angle: 45° with central reinforcement (📦 #1582)

1 object(s) - format STL
Round air vent STL file ∅ 104.6 mm, slat angle: 45° with central reinforcement
File of a round vent cover for air circulation in STL format. Its insertion diameter is 104.6 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement secures the slats. This 3D vent grille features a thin flange of 5 mm. The overall diameter of the model is 114.6 mm.
Parameter Value Unit
male diameter 104.6 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #2492)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 40° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its insertion diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the slats. This 3D vent grille features a flange of 7 mm. The total diameter of the model is 164 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 40 °
slat thickness 1.6 mm
flange width 7 mm
central reinforcement yes

Round air vent STL file ∅ 120 mm, slat angle: 45° with central reinforcement (📦 #1333)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL file ∅ 120 mm, slat angle: 45° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its male diameter measures 120 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This 3D vent cover has a thin flange of 5 mm. The overall diameter of the model is 130 mm.
Parameter Value Unit
male diameter 120 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1396)

1 object(s) - format STL
Round air vent STL file ∅ 71.2 mm, slat angle: 45° with central reinforcement
3D design of a round grille for air circulation in STL format. Its male diameter measures 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement reinforces the slats. This vent cover has a thin flange of 5 mm. The total diameter of this model is 81.2 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 70 mm, slat angle: 45° with central reinforcement (📦 #1282)

1 object(s) - format STL (5.0/5) 2 vote(s)
Round air vent STL 3D file ∅ 70 mm, slat angle: 45° with central reinforcement
3D file of a round grille for air circulation in STL format. Its insertion diameter is 70 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement strengthens the whole structure. This vent grille has a thin flange of 5 mm. The full diameter of the model is 80 mm.
Parameter Value Unit
male diameter 70 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 100 mm, slat angle: 45° with central reinforcement (📦 #1266)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 45° with central reinforcement
File of a round air vent for ventilation in STL format. Its male diameter measures 100 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A centered vertical reinforcement strengthens the whole structure. This 3D vent grille features a thin flange of 5 mm. The overall diameter of the model is 110 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 91.9 mm, slat angle: 45° with central reinforcement (📦 #2299)

1 object(s) - format STL
Round air vent STL file ∅ 91.9 mm, slat angle: 45° with central reinforcement
3D design of a round vent cover for ventilation in STL format. Its insertion diameter is 91.9 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A central reinforcement strengthens the slats. This 3D vent cover has a thin flange of 5 mm. The full diameter of the model is 101.9 mm.
Parameter Value Unit
male diameter 91.9 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 67 mm, slat angle: 45° with central reinforcement (📦 #3192)

1 object(s) - format STL
Round air vent STL 3D file ∅ 67 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for ventilation in STL format. Its insertion diameter is 67 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement strengthens the slats. This vent cover features a thin flange of 5 mm. The overall diameter of this model is 77 mm.
Parameter Value Unit
male diameter 67 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 92 mm, slat angle: 25° with central reinforcement (📦 #2304)

1 object(s) - format STL
Round air vent STL 3D file ∅ 92 mm, slat angle: 25° with central reinforcement
Design of a round air vent for ventilation in STL format. Its male diameter is 92 mm. The slats have a slight angle of 25° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille has a flange of 10 mm. The full diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 25 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 95 mm, slat angle: 30° with central reinforcement (📦 #3237)

1 object(s) - format STL
Round air vent STL file ∅ 95 mm, slat angle: 30° with central reinforcement
3D model of a round grille for ventilation in STL format. Its male diameter measures 95 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A central reinforcement secures the slats. This 3D vent grille features a flange of 10 mm. The full diameter of this model is 115 mm.
Parameter Value Unit
male diameter 95 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement (📦 #2140)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter is 92 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This 3D vent cover has a flange of 10 mm. The total diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 91.9 mm, slat angle: 20° with central reinforcement (📦 #2298)

1 object(s) - format STL
Round air vent STL 3D file ∅ 91.9 mm, slat angle: 20° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter measures 91.9 mm. The slats have a slight angle of 20° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the slats. This 3D vent grille features a flange of 10 mm. The total diameter of the model is 111.9 mm.
Parameter Value Unit
male diameter 91.9 mm
slat angle 20 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 120 mm, slat angle: 10° with central reinforcement (📦 #3850)

1 object(s) - format STL
Round air vent STL 3D file ∅ 120 mm, slat angle: 10° with central reinforcement
3D model of a round grille for ventilation in STL format. Its insertion diameter is 120 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This 3D aeration grille has a thin flange of 5 mm. The total diameter of this model is 130 mm.
Parameter Value Unit
male diameter 120 mm
slat angle 10 °
slat thickness 2 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 99.8 mm, slat angle: 45° with central reinforcement (📦 #3879)

1 object(s) - format STL
Round air vent STL 3D file ∅ 99.8 mm, slat angle: 45° with central reinforcement
3D model of a round grille for ventilation in STL format. Its insertion diameter measures 99.8 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement strengthens the slats. This 3D vent grille has a collar of 10 mm. The overall diameter of this model is 119.8 mm.
Parameter Value Unit
male diameter 99.8 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 200 mm, slat angle: 30° with central reinforcement (📦 #3793)

1 object(s) - format STL
Round air vent STL file ∅ 200 mm, slat angle: 30° with central reinforcement
Design of a round vent cover for ventilation in STL format. Its male diameter measures 200 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A vertical reinforcement reinforces the slats. This ventilation grille features a thin flange of 5 mm. The overall diameter of the model is 210 mm.
Parameter Value Unit
male diameter 200 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1739)

1 object(s) - format STL
Round air vent STL 3D file ∅ 71.2 mm, slat angle: 45° with central reinforcement
Model of a round grille for ventilation in STL format. Its male diameter is 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This aeration grille features a collar of 10 mm. The overall diameter of this model is 91.2 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 60 mm, slat angle: 30° with central reinforcement (📦 #2169)

1 object(s) - format STL
Round air vent STL file ∅ 60 mm, slat angle: 30° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter measures 60 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This 3D vent cover features a flange of 10 mm. The overall diameter of this model is 80 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes