?>

Pipe elbow STL 3D file 15° ⌀OD: 77 mm ⌀ID: 75 mm thickness: 1 mm 📦#2278

STL Download STL
Create a new model:
from scratch search for a model
File of a pipe elbow with a 15° angle in STL format. This elbow has an outer diameter of 77 mm and an inner diameter of 75 mm. The tube thickness is therefore 1 mm. End fillets make it easier to insert.
Generation date: 2025-10-07
3D Model Pipe elbow STL 3D file 15° ⌀OD: 77 mm ⌀ID: 75 mm thickness: 1 mm

3D model download

Free
  • pipe-elbow-ouD77mm-inD75mm-deg_model2278-nb0_dd{id}.stl : 1.8 Mo
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 77 mm
#2 inner diameter 75 mm
#3 angle 15 °
#4 end fillets yes
illustration of the parameters
Representation of the parameters

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow STL 3D file 45° ⌀OD: 78 mm ⌀ID: 76 mm thickness: 1 mm (📦 #2246)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 78 mm ⌀ID: 76 mm thickness: 1 mm
Model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 78 mm and an internal diameter of 76 mm. The tube thickness is therefore 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 78 mm
inner diameter 76 mm
angle 45 °
end fillets yes

Pipe elbow STL file 10° ⌀OD: 57.2 mm ⌀ID: 49.2 mm thickness: 4 mm (📦 #2173)

1 object(s) - format STL
Pipe elbow STL file 10° ⌀OD: 57.2 mm ⌀ID: 49.2 mm thickness: 4 mm
3D file of a pipe elbow with a 10° angle in STL format. This pipe elbow features an outer diameter of 57.2 mm and an inner diameter of 49.2 mm. The tube thickness is therefore 4 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 57.2 mm
inner diameter 49.2 mm
angle 10 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1636)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 90 mm
inner diameter 82 mm
angle 45 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 76.2 mm ⌀ID: 60 mm thickness: 8.1 mm (📦 #2077)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 76.2 mm ⌀ID: 60 mm thickness: 8.1 mm
Model of an elbow with a 45° angle in STL format. This elbow has an outer diameter of 76.2 mm and an inner diameter of 60 mm. This results in a tube thickness of 8.1 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 76.2 mm
inner diameter 60 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 45° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm (📦 #2174)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm
File of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 70 mm and an internal diameter of 60 mm. The tube thickness is therefore 5 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 70 mm
inner diameter 60 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 10° ⌀OD: 48.3 mm ⌀ID: 40.9 mm thickness: 3.7 mm (📦 #2128)

1 object(s) - format STL
Pipe elbow STL 3D file 10° ⌀OD: 48.3 mm ⌀ID: 40.9 mm thickness: 3.7 mm
File of an elbow with a 10° angle in STL format. This elbow features an outer diameter of 48.3 mm and an inner diameter of 40.9 mm. The tube thickness is therefore 3.7 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 48.3 mm
inner diameter 40.9 mm
angle 10 °
end fillets yes

Pipe elbow STL 3D file 45° ⌀OD: 88.9 mm ⌀ID: 44 mm thickness: 22.45 mm (📦 #2074)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 88.9 mm ⌀ID: 44 mm thickness: 22.45 mm
Model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an outer diameter of 88.9 mm and an inner diameter of 44 mm. The tube thickness is therefore 22.45 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 88.9 mm
inner diameter 44 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm (📦 #1375)

1 object(s) - format STL
Pipe elbow STL 3D file 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm
3D file of an elbow with a 37° angle in STL format. This elbow has an external diameter of 48 mm and an internal diameter of 44 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 48 mm
inner diameter 44 mm
angle 37 °
end fillets yes

Pipe elbow STL 3D file 45° ⌀OD: 76.2 mm ⌀ID: 34 mm thickness: 21.1 mm (📦 #2075)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 76.2 mm ⌀ID: 34 mm thickness: 21.1 mm
3D file of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 76.2 mm and an internal diameter of 34 mm. This results in a tube thickness of 21.1 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 76.2 mm
inner diameter 34 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 45° ⌀OD: 47 mm ⌀ID: 41 mm thickness: 3 mm (📦 #2440)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 47 mm ⌀ID: 41 mm thickness: 3 mm
Model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an outer diameter of 47 mm and an inner diameter of 41 mm. This results in a tube thickness of 3 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 47 mm
inner diameter 41 mm
angle 45 °
end fillets yes

Pipe elbow STL file 15° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm (📦 #1879)

1 object(s) - format STL
Pipe elbow STL file 15° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm
3D file of an elbow with a 15° angle in STL format. This pipe elbow features an outer diameter of 38.5 mm and an inner diameter of 30.5 mm. This results in a tube thickness of 4 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 38.5 mm
inner diameter 30.5 mm
angle 15 °
end fillets yes

Pipe elbow STL file 60° ⌀OD: 45 mm ⌀ID: 43 mm thickness: 1 mm (📦 #1376)

1 object(s) - format STL
Pipe elbow STL file 60° ⌀OD: 45 mm ⌀ID: 43 mm thickness: 1 mm
Model of a pipe elbow with a 60° angle in STL format. This pipe elbow has an external diameter of 45 mm and an internal diameter of 43 mm. This results in a tube thickness of 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 45 mm
inner diameter 43 mm
angle 60 °
end fillets yes

Pipe elbow STL 3D file 10° ⌀OD: 30 mm ⌀ID: 28 mm thickness: 1 mm (📦 #1944)

1 object(s) - format STL
Pipe elbow STL 3D file 10° ⌀OD: 30 mm ⌀ID: 28 mm thickness: 1 mm
File of an elbow with a 10° angle in STL format. This pipe elbow has an outer diameter of 30 mm and an inner diameter of 28 mm. The tube thickness is therefore 1 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 30 mm
inner diameter 28 mm
angle 10 °
end fillets yes

Pipe elbow STL 3D file 30° ⌀OD: 30 mm ⌀ID: 28 mm thickness: 1 mm (📦 #1467)

1 object(s) - format STL
Pipe elbow STL 3D file 30° ⌀OD: 30 mm ⌀ID: 28 mm thickness: 1 mm
3D model of a pipe elbow with a 30° angle in STL format. This pipe elbow features an external diameter of 30 mm and an internal diameter of 28 mm. This results in a tube thickness of 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 30 mm
inner diameter 28 mm
angle 30 °
end fillets yes

Pipe elbow STL 3D file 45° ⌀OD: 76.2 mm ⌀ID: 10 mm thickness: 33.1 mm (📦 #2076)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 76.2 mm ⌀ID: 10 mm thickness: 33.1 mm
3D file of an elbow with a 45° angle in STL format. This elbow has an external diameter of 76.2 mm and an internal diameter of 10 mm. This results in a tube thickness of 33.1 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 76.2 mm
inner diameter 10 mm
angle 45 °
end fillets yes

Pipe elbow STL file 80° ⌀OD: 57.2 mm ⌀ID: 49.2 mm thickness: 4 mm (📦 #2147)

1 object(s) - format STL
Pipe elbow STL file 80° ⌀OD: 57.2 mm ⌀ID: 49.2 mm thickness: 4 mm
File of a pipe elbow with an 80° angle in STL format. This elbow has an external diameter of 57.2 mm and an internal diameter of 49.2 mm. The tube thickness is therefore 4 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 57.2 mm
inner diameter 49.2 mm
angle 80 °
end fillets yes

Pipe elbow STL 3D file 70° ⌀OD: 40 mm ⌀ID: 38 mm thickness: 1 mm (📦 #2273)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 40 mm ⌀ID: 38 mm thickness: 1 mm
File of an elbow with a 70° angle in STL format. This elbow features an outer diameter of 40 mm and an inner diameter of 38 mm. The tube thickness is therefore 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 40 mm
inner diameter 38 mm
angle 70 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm (📦 #1469)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm
Model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 75 mm. The tube thickness is therefore 2.5 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 75 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 76 mm thickness: 2 mm (📦 #2209)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 76 mm thickness: 2 mm
3D model of an elbow with a 90° angle in STL format. This elbow features an external diameter of 80 mm and an internal diameter of 76 mm. The tube thickness is therefore 2 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 76 mm
angle 90 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm (📦 #1446)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 77 mm. The tube thickness is therefore 1.5 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 77 mm
angle 90 °
end fillets yes

Pipe elbow STL file 60° ⌀OD: 32 mm ⌀ID: 28 mm thickness: 2 mm (📦 #1381)

1 object(s) - format STL
Pipe elbow STL file 60° ⌀OD: 32 mm ⌀ID: 28 mm thickness: 2 mm
Model of a pipe elbow with a 60° angle in STL format. This pipe elbow has an outer diameter of 32 mm and an inner diameter of 28 mm. The tube thickness is therefore 2 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 32 mm
inner diameter 28 mm
angle 60 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 88 mm ⌀ID: 84 mm thickness: 2 mm (📦 #2387)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 88 mm ⌀ID: 84 mm thickness: 2 mm
3D file of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 88 mm and an internal diameter of 84 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 88 mm
inner diameter 84 mm
angle 90 °
end fillets yes

Pipe elbow STL 3D file 1° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm (📦 #1808)

1 object(s) - format STL
Pipe elbow STL 3D file 1° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm
3D model of a pipe elbow with a 1° angle in STL format. This elbow features an outer diameter of 20 mm and an inner diameter of 18 mm. This results in a tube thickness of 1 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 20 mm
inner diameter 18 mm
angle 1 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm (📦 #1462)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 85 mm. This results in a tube thickness of 2.5 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 90 mm
inner diameter 85 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm (📦 #2175)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm
3D file of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 70 mm and an internal diameter of 60 mm. This results in a tube thickness of 5 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 70 mm
inner diameter 60 mm
angle 90 °
end fillets yes

Pipe elbow STL 3D file 80° ⌀OD: 48.3 mm ⌀ID: 40.9 mm thickness: 3.7 mm (📦 #2127)

1 object(s) - format STL
Pipe elbow STL 3D file 80° ⌀OD: 48.3 mm ⌀ID: 40.9 mm thickness: 3.7 mm
Model of an elbow with an 80° angle in STL format. This elbow has an external diameter of 48.3 mm and an internal diameter of 40.9 mm. This results in a tube thickness of 3.7 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 48.3 mm
inner diameter 40.9 mm
angle 80 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 64 mm ⌀ID: 58 mm thickness: 3 mm (📦 #2431)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 64 mm ⌀ID: 58 mm thickness: 3 mm
File of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 64 mm and an internal diameter of 58 mm. This results in a tube thickness of 3 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 64 mm
inner diameter 58 mm
angle 90 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 60 mm ⌀ID: 50 mm thickness: 5 mm (📦 #1838)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 60 mm ⌀ID: 50 mm thickness: 5 mm
3D file of an elbow with a 90° angle in STL format. This elbow features an external diameter of 60 mm and an internal diameter of 50 mm. The tube thickness is therefore 5 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 60 mm
inner diameter 50 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 99.8 mm ⌀ID: 97.8 mm thickness: 1 mm (📦 #2100)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 99.8 mm ⌀ID: 97.8 mm thickness: 1 mm
Model of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 99.8 mm and an inner diameter of 97.8 mm. This results in a tube thickness of 1 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 99.8 mm
inner diameter 97.8 mm
angle 90 °
end fillets yes