?>

L-bracket 100×100 mm STL file, thickness 12 mm, hole diameter 8 mm 📦#2171

STL Download STL
Create a new model:
from scratch search for a model
3D model of a mounting bracket with a central reinforcing bar in STL format. The dimensions are 100 mm in length, 100 mm in height, 40 mm in width, and 12 mm in thickness. The drill holes are designed with a diameter of 8 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The central reinforcement bar improves rigidity and includes two openings for fastening. This bracket prints without support, placed flat on the build plate.
Generation date: 2025-10-02
3D Model L-bracket 100×100 mm STL file, thickness 12 mm, hole diameter 8 mm

3D model download

Free
  • l-bracket-len100mm-hgt100mm-wi_model2171-nb0_dd{id}.stl : 342.9 Ko
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the L-bracket template, with the following values:
Parameter Value
#1 length 100 mm
#2 height 100 mm
#3 width 40 mm
#4 thickness 12 mm
#5 hole diameter 8 mm
#6 chamfer on the holes yes
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 length len
#2 height hgt
#3 width wid
#4 thickness thi
#5 hole diameter hod
#6 chamfer on the holes cha

Related 3D models

To search for a model based on your own parameters, go to the template page L-bracket 

Corner bracket 100×100 mm STL 3D file, thickness 8 mm, hole diameter 6 mm (📦 #2380)

1 object(s) - format STL
Corner bracket 100×100 mm STL 3D file, thickness 8 mm, hole diameter 6 mm
File of a support bracket reinforced in STL format. The dimensions are 100 mm in length, 100 mm in height, 40 mm in width, and 8 mm in thickness. The drill holes have a diameter of 6 mm. Chamfers are applied to the holes to seat the screw heads. The reinforcing bar reduces bending and includes two passages for fastening. Support generation is not required for printing this bracket, placed flat directly on the build plate.
Parameter Value Unit
length 100 mm
height 100 mm
width 40 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 110×110 mm STL file, thickness 8 mm, hole diameter 6 mm (📦 #2242)

1 object(s) - format STL (4.5/5) 2 vote(s)
Shelf bracket 110×110 mm STL file, thickness 8 mm, hole diameter 6 mm
Model of an angle bracket with a central reinforcing bar in STL 3D format. The dimensions are 110 mm in length, 110 mm in height, 50 mm in width, and 8 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are done to the holes for a cleaner fit of the screws. The central reinforcement bar reduces bending and includes two openings for screwdriver access. No support is needed to print this bracket, printed flat directly on the build plate.
Parameter Value Unit
length 110 mm
height 110 mm
width 50 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Support bracket 120×110 mm STL 3D file, thickness 8 mm, hole diameter 6 mm (📦 #2312)

1 object(s) - format STL
Support bracket 120×110 mm STL 3D file, thickness 8 mm, hole diameter 6 mm
Download this 3D model of a right-angle bracket with a central reinforcement in STL format. The dimensions are 120 mm in length, 110 mm in height, 50 mm in width, and 8 mm in thickness. The holes have a diameter of 6 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar reduces bending and provides two clearances for fastening. Support generation is not required for printing this bracket, printed flat on the print bed.
Parameter Value Unit
length 120 mm
height 110 mm
width 50 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 100×100 mm STL file, thickness 12 mm, hole diameter 6 mm (📦 #2239)

1 object(s) - format STL (5.0/5) 2 vote(s)
Shelf bracket 100×100 mm STL file, thickness 12 mm, hole diameter 6 mm
3D model of a support bracket with a central reinforcing bar in STL format. The dimensions are 100 mm in length, 100 mm in height, 14 mm in width, and 12 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are applied to the holes to improve the seating of the heads. The reinforcing bar enhances mechanical strength and provides two clearances for fastening. Support generation is not required for printing this bracket, lying flat directly on the build plate.
Parameter Value Unit
length 100 mm
height 100 mm
width 14 mm
thickness 12 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 150×100 mm STL 3D file, thickness 12 mm, hole diameter 6 mm (📦 #2315)

1 object(s) - format STL
Shelf bracket 150×100 mm STL 3D file, thickness 12 mm, hole diameter 6 mm
Model of a right-angle bracket with a central reinforcing bar in STL format. The dimensions are 150 mm in length, 100 mm in height, 14 mm in width, and 12 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are done to the holes to improve the seating of the heads. The central reinforcement bar reduces bending and includes two openings for fastening. No support is needed to print this bracket, lying flat on the build plate.
Parameter Value Unit
length 150 mm
height 100 mm
width 14 mm
thickness 12 mm
hole diameter 6 mm
chamfer on the holes yes

L-bracket 120×250 mm STL file, thickness 12 mm, hole diameter 6 mm (📦 #2188)

1 object(s) - format STL
L-bracket 120×250 mm STL file, thickness 12 mm, hole diameter 6 mm
3D model of an angle bracket reinforced in STL format. The dimensions are 120 mm in length, 250 mm in height, 30 mm in width, and 12 mm in thickness. The mounting holes have a diameter of 6 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The central reinforcement bar improves rigidity and provides two clearances for screwdriver access. No support is needed to print this bracket, lying flat on the build plate.
Parameter Value Unit
length 120 mm
height 250 mm
width 30 mm
thickness 12 mm
hole diameter 6 mm
chamfer on the holes yes

Corner bracket 200×150 mm STL file, thickness 8 mm, hole diameter 6 mm (📦 #2382)

1 object(s) - format STL (5.0/5) 1 vote(s)
Corner bracket 200×150 mm STL file, thickness 8 mm, hole diameter 6 mm
Model of a corner bracket with a central reinforcement in STL format. The dimensions are 200 mm in length, 150 mm in height, 40 mm in width, and 8 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are done to the holes to improve the seating of the heads. The central reinforcement bar reduces bending and includes two passages for fastening. No support is needed to print this bracket, placed flat on the build plate.
Parameter Value Unit
length 200 mm
height 150 mm
width 40 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

L-bracket 150×200 mm STL file, thickness 8 mm, hole diameter 6 mm (📦 #2187)

1 object(s) - format STL
L-bracket 150×200 mm STL file, thickness 8 mm, hole diameter 6 mm
Model of a support bracket reinforced in STL format. The dimensions are 150 mm in length, 200 mm in height, 30 mm in width, and 8 mm in thickness. The holes have a diameter of 6 mm. Chamfers are done to the holes for a cleaner fit of the screws. The reinforcing bar improves rigidity and includes two clearances for screwdriver access. This bracket prints without support, printed flat on the print bed.
Parameter Value Unit
length 150 mm
height 200 mm
width 30 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

L-bracket 250×100 mm STL file, thickness 8 mm, hole diameter 6 mm (📦 #2176)

1 object(s) - format STL
L-bracket 250×100 mm STL file, thickness 8 mm, hole diameter 6 mm
Download this 3D model of a mounting bracket with reinforcement in STL 3D format. The dimensions are 250 mm in length, 100 mm in height, 40 mm in width, and 8 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are applied to the holes to seat the screw heads. The central reinforcement bar reduces bending and provides two clearances for screwdriver access. Support generation is not required for printing this bracket, lying flat on the print bed.
Parameter Value Unit
length 250 mm
height 100 mm
width 40 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Mounting bracket 250×150 mm STL 3D file, thickness 8 mm, hole diameter 6 mm (📦 #2381)

1 object(s) - format STL
Mounting bracket 250×150 mm STL 3D file, thickness 8 mm, hole diameter 6 mm
File of a support bracket reinforced in STL 3D format. The dimensions are 250 mm in length, 150 mm in height, 40 mm in width, and 8 mm in thickness. The mounting holes are designed with a diameter of 6 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar enhances mechanical strength and includes two passages for fastening. This bracket prints without support, printed flat on the print bed.
Parameter Value Unit
length 250 mm
height 150 mm
width 40 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 153×203 mm STL 3D file, thickness 7 mm, hole diameter 6 mm (📦 #2331)

1 object(s) - format STL
Shelf bracket 153×203 mm STL 3D file, thickness 7 mm, hole diameter 6 mm
3D file of an angle bracket with a central reinforcement in STL format. The dimensions are 153 mm in length, 203 mm in height, 25 mm in width, and 7 mm in thickness. The drill holes have a diameter of 6 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The reinforcing bar enhances mechanical strength and includes two clearances for screwdriver access. This bracket prints without support, placed flat on the build plate.
Parameter Value Unit
length 153 mm
height 203 mm
width 25 mm
thickness 7 mm
hole diameter 6 mm
chamfer on the holes yes

Support bracket 100×100 mm STL file, thickness 10 mm, hole diameter 5 mm (📦 #2324)

1 object(s) - format STL
Support bracket 100×100 mm STL file, thickness 10 mm, hole diameter 5 mm
Download this 3D file of a right-angle bracket reinforced in STL 3D format. The dimensions are 100 mm in length, 100 mm in height, 30 mm in width, and 10 mm in thickness. The holes are designed with a diameter of 5 mm. Chamfers are done to the holes to improve the seating of the heads. The central reinforcement bar improves rigidity and includes two passages for fastening. This bracket prints without support, placed flat directly on the build plate.
Parameter Value Unit
length 100 mm
height 100 mm
width 30 mm
thickness 10 mm
hole diameter 5 mm
chamfer on the holes yes

Angle bracket 100×100 mm STL 3D file, thickness 8 mm, hole diameter 6 mm (📦 #2435)

1 object(s) - format STL
Angle bracket 100×100 mm STL 3D file, thickness 8 mm, hole diameter 6 mm
3D file of a mounting bracket with a central reinforcing bar in STL format. The dimensions are 100 mm in length, 100 mm in height, 30 mm in width, and 8 mm in thickness. The mounting holes have a diameter of 6 mm. The reinforcing bar reduces bending and provides two openings for screwdriver access. Support generation is not required for printing this bracket, lying flat directly on the build plate.
Parameter Value Unit
length 100 mm
height 100 mm
width 30 mm
thickness 8 mm
hole diameter 6 mm
chamfer on the holes no

L-bracket 100×100 mm STL file, thickness 6 mm, hole diameter 6 mm (📦 #2170)

1 object(s) - format STL
L-bracket 100×100 mm STL file, thickness 6 mm, hole diameter 6 mm
Download this file of a support bracket with a central reinforcing bar in STL format. The dimensions are 100 mm in length, 100 mm in height, 14 mm in width, and 6 mm in thickness. The screw holes have a diameter of 6 mm. Chamfers are applied to the holes to improve the seating of the heads. The central reinforcement bar reduces bending and provides two passages for fastening. Support generation is not required for printing this bracket, printed flat directly on the build plate.
Parameter Value Unit
length 100 mm
height 100 mm
width 14 mm
thickness 6 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 250×250 mm STL file, thickness 10 mm, hole diameter 6 mm (📦 #2287)

1 object(s) - format STL
Shelf bracket 250×250 mm STL file, thickness 10 mm, hole diameter 6 mm
3D file of a mounting bracket with reinforcement in STL 3D format. The dimensions are 250 mm in length, 250 mm in height, 40 mm in width, and 10 mm in thickness. The mounting holes are designed with a diameter of 6 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar enhances mechanical strength and includes two openings for screwdriver access. No support is needed to print this bracket, placed flat directly on the build plate.
Parameter Value Unit
length 250 mm
height 250 mm
width 40 mm
thickness 10 mm
hole diameter 6 mm
chamfer on the holes yes

Mounting bracket 100×100 mm STL file, thickness 8 mm, hole diameter 5 mm (📦 #2418)

1 object(s) - format STL
Mounting bracket 100×100 mm STL file, thickness 8 mm, hole diameter 5 mm
3D file of a mounting bracket with a reinforcing bar in STL format. The dimensions are 100 mm in length, 100 mm in height, 40 mm in width, and 8 mm in thickness. The screw holes are designed with a diameter of 5 mm. Chamfers are done to the holes for a cleaner fit of the screws. The central reinforcement bar improves rigidity and includes two passages for screwdriver access. No support is needed to print this bracket, placed flat on the print bed.
Parameter Value Unit
length 100 mm
height 100 mm
width 40 mm
thickness 8 mm
hole diameter 5 mm
chamfer on the holes yes

Mounting bracket 100×200 mm STL file, thickness 12 mm, hole diameter 5 mm (📦 #2274)

1 object(s) - format STL
Mounting bracket 100×200 mm STL file, thickness 12 mm, hole diameter 5 mm
3D model of a mounting bracket with reinforcement in STL format. The dimensions are 100 mm in length, 200 mm in height, 25 mm in width, and 12 mm in thickness. The drill holes have a diameter of 5 mm. Chamfers are done to the holes to improve the seating of the heads. The reinforcing bar enhances mechanical strength and provides two clearances for screwdriver access. This bracket prints without support, placed flat on the build plate.
Parameter Value Unit
length 100 mm
height 200 mm
width 25 mm
thickness 12 mm
hole diameter 5 mm
chamfer on the holes yes

L-bracket 150×200 mm STL 3D file, thickness 10 mm, hole diameter 5 mm (📦 #2336)

1 object(s) - format STL
L-bracket 150×200 mm STL 3D file, thickness 10 mm, hole diameter 5 mm
3D model of a mounting bracket with a central reinforcing bar in STL 3D format. The dimensions are 150 mm in length, 200 mm in height, 50 mm in width, and 10 mm in thickness. The mounting holes are designed with a diameter of 5 mm. Chamfers are done to the holes to improve the seating of the heads. The reinforcing bar enhances mechanical strength and provides two openings for fastening. No support is needed to print this bracket, lying flat on the print bed.
Parameter Value Unit
length 150 mm
height 200 mm
width 50 mm
thickness 10 mm
hole diameter 5 mm
chamfer on the holes yes

Mounting bracket 100×100 mm STL 3D file, thickness 8 mm, hole diameter 5 mm (📦 #2434)

1 object(s) - format STL
Mounting bracket 100×100 mm STL 3D file, thickness 8 mm, hole diameter 5 mm
Download this 3D model of a right-angle bracket with a central reinforcement in STL 3D format. The dimensions are 100 mm in length, 100 mm in height, 25 mm in width, and 8 mm in thickness. The holes are designed with a diameter of 5 mm. Chamfers are applied to the holes to seat the screw heads. The central reinforcement bar enhances mechanical strength and includes two openings for screwdriver access. No support is needed to print this bracket, placed flat directly on the build plate.
Parameter Value Unit
length 100 mm
height 100 mm
width 25 mm
thickness 8 mm
hole diameter 5 mm
chamfer on the holes yes

L-bracket 200×200 mm STL file, thickness 5 mm, hole diameter 6 mm (📦 #2238)

1 object(s) - format STL
L-bracket 200×200 mm STL file, thickness 5 mm, hole diameter 6 mm
3D file of a mounting bracket with a reinforcing bar in STL 3D format. The dimensions are 200 mm in length, 200 mm in height, 50 mm in width, and 5 mm in thickness. The drill holes are designed with a diameter of 6 mm. Chamfers are applied to the holes to seat the screw heads. The central reinforcement bar reduces bending and includes two passages for fastening. This bracket prints without support, printed flat on the build plate.
Parameter Value Unit
length 200 mm
height 200 mm
width 50 mm
thickness 5 mm
hole diameter 6 mm
chamfer on the holes yes

Shelf bracket 200×230 mm STL 3D file, thickness 10 mm, hole diameter 5 mm (📦 #2372)

1 object(s) - format STL
Shelf bracket 200×230 mm STL 3D file, thickness 10 mm, hole diameter 5 mm
Download this model of a right-angle bracket with reinforcement in STL 3D format. The dimensions are 200 mm in length, 230 mm in height, 28 mm in width, and 10 mm in thickness. The mounting holes are designed with a diameter of 5 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The reinforcing bar enhances mechanical strength and includes two passages for fastening. This bracket prints without support, placed flat on the build plate.
Parameter Value Unit
length 200 mm
height 230 mm
width 28 mm
thickness 10 mm
hole diameter 5 mm
chamfer on the holes yes

Corner bracket 150×130 mm STL 3D file, thickness 6 mm, hole diameter 5 mm (📦 #2412)

1 object(s) - format STL
Corner bracket 150×130 mm STL 3D file, thickness 6 mm, hole diameter 5 mm
3D file of an angle bracket with reinforcement in STL format. The dimensions are 150 mm in length, 130 mm in height, 30 mm in width, and 6 mm in thickness. The drill holes have a diameter of 5 mm. Chamfers are done to the holes to seat the screw heads. The reinforcing bar improves rigidity and provides two clearances for fastening. No support is needed to print this bracket, placed flat directly on the build plate.
Parameter Value Unit
length 150 mm
height 130 mm
width 30 mm
thickness 6 mm
hole diameter 5 mm
chamfer on the holes yes

Mounting bracket 250×250 mm STL 3D file, thickness 10 mm, hole diameter 6 mm (📦 #2286)

1 object(s) - format STL
Mounting bracket 250×250 mm STL 3D file, thickness 10 mm, hole diameter 6 mm
Download this file of an angle bracket reinforced in STL 3D format. The dimensions are 250 mm in length, 250 mm in height, 40 mm in width, and 10 mm in thickness. The screw holes are designed with a diameter of 6 mm. The central reinforcement bar improves rigidity and provides two passages for screwdriver access. This bracket prints without support, placed flat directly on the build plate.
Parameter Value Unit
length 250 mm
height 250 mm
width 40 mm
thickness 10 mm
hole diameter 6 mm
chamfer on the holes no

Mounting bracket 120×120 mm STL file, thickness 8 mm, hole diameter 5 mm (📦 #2178)

1 object(s) - format STL
Mounting bracket 120×120 mm STL file, thickness 8 mm, hole diameter 5 mm
Download this 3D file of an angle bracket with a central reinforcement in STL 3D format. The dimensions are 120 mm in length, 120 mm in height, 20 mm in width, and 8 mm in thickness. The mounting holes are designed with a diameter of 5 mm. The reinforcing bar enhances mechanical strength and provides two passages for screwdriver access. Support generation is not required for printing this bracket, printed flat directly on the build plate.
Parameter Value Unit
length 120 mm
height 120 mm
width 20 mm
thickness 8 mm
hole diameter 5 mm
chamfer on the holes no