Enclosure with screw-mounted lid STL 3D file: 120×75×50 mm 📦#2018
Generation date: 2025-09-26
3D model download
Free- object #0 enclosure-with-screw-mounted-l_model2018-nb0_dd{id}.stl : 276.4 Ko
- object #1 enclosure-with-screw-mounted-l_model2018-nb1_dd{id}.stl : 199.9 Ko
STL
Mesh quality :
0.1
0.1
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Enclosure with screw-mounted lid template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | length | 120 mm |
| #2 | width | 75 mm |
| #3 | total height | 50 mm |
| #4 | lid height | 10 mm |
| #5 | wall thickness | 2 mm |
| #6 | screw margin | 0 mm |
| #7 | fit clearance | 0.1 mm |
| #8 | cooling level | - |
| #9 | cooling zone(s) | no cutouts |
Representation of the parameters
- The thickness of the upper lid shell is always 5 mm.
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 length | len |
| #2 width | wid |
| #3 total height | Thei |
| #4 lid height | Lhei |
| #5 wall thickness | waT |
| #6 screw margin | Tmrg |
| #7 fit clearance | Imrg |
| #8 cooling level | cooL |
| #9 cooling zone(s) | cooZ |
Related 3D models
To search for a model based on your own parameters, go to the template page Enclosure with screw-mounted lid
Enclosure with screw-mounted lid STL 3D file: 120×60×40 mm (📦 #1246)
2 object(s) - format STL
Enclosure with lid in 3D STL format. The dimensions are 120 mm long by 60 mm wide and 40 mm high. The lid measures 10 mm high. Side thickness is 3 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 60 | mm |
| total height | 40 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 100×110×30 mm (📦 #1182)
2 object(s) - format STL (5.0/5) 1 vote(s)
Enclosure model with a screwed lid in 3D STL format. The dimensions are 100 mm long by 110 mm wide and 30 mm high. The cover only measures 10 mm high. Wall thickness is 2 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 100 | mm |
| width | 110 | mm |
| total height | 30 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 100×60×40 mm (📦 #1244)
2 object(s) - format STL
Enclosure model with screwed lid in 3D STL format. The dimensions are 100 mm long by 60 mm wide and 40 mm high. The cover only is 10 mm high. Side thickness is 3 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 100 | mm |
| width | 60 | mm |
| total height | 40 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 90×60×40 mm (📦 #1167)
2 object(s) - format STL (5.0/5) 1 vote(s)
Enclosure with a screwed lid in STL format. The dimensions are 90 mm long by 60 mm wide and 40 mm high. The lid only is 10 mm high. Wall thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 90 | mm |
| width | 60 | mm |
| total height | 40 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 160×70×50 mm (📦 #1313)
2 object(s) - format STL
Download this enclosure with screwed lid in 3D STL format. The dimensions are 160 mm long by 70 mm wide and 50 mm high. The lid only is 10 mm high. Side thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 160 | mm |
| width | 70 | mm |
| total height | 50 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 100×50×40 mm (📦 #1241)
2 object(s) - format STL
Download this enclosure model with lid in 3D STL format. The dimensions are 100 mm long by 50 mm wide and 40 mm high. The cover only measures 12 mm high. Wall thickness is 2 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 100 | mm |
| width | 50 | mm |
| total height | 40 | mm |
| lid height | 12 | mm |
| wall thickness | 2 | mm |
| screw margin | -0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 75×55×40 mm (📦 #1180)
2 object(s) - format STL
Download this enclosure with a screwed lid in 3D STL format. The dimensions are 75 mm long by 55 mm wide and 40 mm high. The lid only is 12 mm high. Wall thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 75 | mm |
| width | 55 | mm |
| total height | 40 | mm |
| lid height | 12 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 90×50×40 mm (📦 #2088)
2 object(s) - format STL
Enclosure model with a screwed lid in 3D STL format. The dimensions are 90 mm long by 50 mm wide and 40 mm high. The cover only measures 15 mm high. Side thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 90 | mm |
| width | 50 | mm |
| total height | 40 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 60×40×20 mm (📦 #1168)
2 object(s) - format STL
Download this enclosure with screwed lid in STL format. The dimensions are 60 mm long by 40 mm wide and 20 mm high. The cover is 10 mm high. Wall thickness is 2 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 60 | mm |
| width | 40 | mm |
| total height | 20 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 80×80×40 mm (📦 #1686)
2 object(s) - format STL
Enclosure with screwed lid in STL format. The dimensions are 80 mm long by 80 mm wide and 40 mm high. The lid only measures 10 mm high. Side thickness is 3 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 80 | mm |
| width | 80 | mm |
| total height | 40 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 55×55×35 mm (📦 #1159)
2 object(s) - format STL
Enclosure model with a screwed lid in STL format. The dimensions are 55 mm long by 55 mm wide and 35 mm high. The lid is 10 mm high. Side thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 55 | mm |
| width | 55 | mm |
| total height | 35 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 50×40×20 mm (📦 #1174)
2 object(s) - format STL (5.0/5) 1 vote(s)
Download this enclosure with screwed lid in 3D STL format. The dimensions are 50 mm long by 40 mm wide and 20 mm high. The lid is 10 mm high. Side thickness is 2 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 50 | mm |
| width | 40 | mm |
| total height | 20 | mm |
| lid height | 10 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 70×40×25 mm (📦 #1152)
2 object(s) - format STL
Download this enclosure with screwed lid in STL format. The dimensions are 70 mm long by 40 mm wide and 25 mm high. The cover only measures 10 mm high. Wall thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 70 | mm |
| width | 40 | mm |
| total height | 25 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 100×50×40 mm (📦 #2422)
2 object(s) - format STL
Download this enclosure with lid in 3D STL format. The dimensions are 100 mm long by 50 mm wide and 40 mm high. The cover is 20 mm high. Wall thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 100 | mm |
| width | 50 | mm |
| total height | 40 | mm |
| lid height | 20 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 100×70×50 mm (📦 #1569)
2 object(s) - format STL (5.0/5) 1 vote(s)
Download this enclosure model with lid in 3D STL format. The dimensions are 100 mm long by 70 mm wide and 50 mm high. The cover measures 12 mm high. Wall thickness is 2 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 100 | mm |
| width | 70 | mm |
| total height | 50 | mm |
| lid height | 12 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.2 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 110×70×25 mm (📦 #1160)
2 object(s) - format STL
Enclosure model with screwed lid in STL format. The dimensions are 110 mm long by 70 mm wide and 25 mm high. The lid only measures 10 mm high. Side thickness is 4 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 110 | mm |
| width | 70 | mm |
| total height | 25 | mm |
| lid height | 10 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 76×51×51 mm (📦 #1568)
2 object(s) - format STL (4.0/5) 1 vote(s)
Enclosure model with screwed lid in STL format. The dimensions are 76 mm long by 51 mm wide and 51 mm high. The lid measures 12 mm high. Side thickness is 2 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 76 | mm |
| width | 51 | mm |
| total height | 51 | mm |
| lid height | 12 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.2 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 90×70×25 mm (with ventilation under the enclosure) (📦 #1169)
2 object(s) - format STL
Enclosure model with lid in 3D STL format. The dimensions are 90 mm long by 70 mm wide and 25 mm high. The cover only measures 10 mm high. Side thickness is 3 mm. This enclosure has cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 90 | mm |
| width | 70 | mm |
| total height | 25 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 3 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 90×50×40 mm (with ventilation on the lid) (📦 #1148)
2 object(s) - format STL (5.0/5) 2 vote(s)
Download this enclosure model with a screwed lid in STL format. The dimensions are 90 mm long by 50 mm wide and 40 mm high. The lid only measures 15 mm high. Side thickness is 3 mm. This enclosure has strong cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 90 | mm |
| width | 50 | mm |
| total height | 40 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 130×90×40 mm (📦 #1176)
2 object(s) - format STL
Enclosure model with lid in 3D STL format. The dimensions are 130 mm long by 90 mm wide and 40 mm high. The cover is 15 mm high. Side thickness is 4 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 130 | mm |
| width | 90 | mm |
| total height | 40 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 80×80×40 mm (with ventilation on the lid) (📦 #1133)
2 object(s) - format STL (4.0/5) 1 vote(s)
Download this enclosure model with screwed lid in STL format. The dimensions are 80 mm long by 80 mm wide and 40 mm high. The cover only is 10 mm high. Wall thickness is 3 mm. This enclosure has significant cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 80 | mm |
| width | 80 | mm |
| total height | 40 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 90×60×30 mm (with ventilation under the enclosure) (📦 #1155)
2 object(s) - format STL
Enclosure model with screwed lid in STL format. The dimensions are 90 mm long by 60 mm wide and 30 mm high. The lid is 10 mm high. Wall thickness is 3 mm. This enclosure features cooling area under the base.
| Parameter | Value | Unit |
|---|---|---|
| length | 90 | mm |
| width | 60 | mm |
| total height | 30 | mm |
| lid height | 10 | mm |
| wall thickness | 3 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 4 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL file: 150×80×35 mm (with ventilation on the lid) (📦 #1651)
2 object(s) - format STL
Enclosure with lid in STL format. The dimensions are 150 mm long by 80 mm wide and 35 mm high. The lid measures 15 mm high. Side thickness is 3 mm. This enclosure features strong cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 150 | mm |
| width | 80 | mm |
| total height | 35 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 5 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 84×54×45 mm (with ventilation on the lid) (📦 #1147)
2 object(s) - format STL
Enclosure model with a screwed lid in STL format. The dimensions are 84 mm long by 54 mm wide and 45 mm high. The cover only is 15 mm high. Side thickness is 2 mm. This enclosure has significant cooling area on the lid.
| Parameter | Value | Unit |
|---|---|---|
| length | 84 | mm |
| width | 54 | mm |
| total height | 45 | mm |
| lid height | 15 | mm |
| wall thickness | 2 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling level | 7 | |
| cooling zone(s) | cutouts on t... |
Enclosure with screw-mounted lid STL 3D file: 80×80×20 mm (📦 #1157)
2 object(s) - format STL
Download this enclosure model with a screwed lid in 3D STL format. The dimensions are 80 mm long by 80 mm wide and 20 mm high. The cover only is 15 mm high. Wall thickness is 4 mm. The enclosure does not feature cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 80 | mm |
| width | 80 | mm |
| total height | 20 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 80×80×20 mm (📦 #1156)
2 object(s) - format STL
Download this enclosure model with screwed lid in STL format. The dimensions are 80 mm long by 80 mm wide and 20 mm high. The lid only is 15 mm high. Wall thickness is 4 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 80 | mm |
| width | 80 | mm |
| total height | 20 | mm |
| lid height | 15 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL 3D file: 110×70×35 mm (📦 #1158)
2 object(s) - format STL
Download this enclosure with a screwed lid in STL format. The dimensions are 110 mm long by 70 mm wide and 35 mm high. The lid measures 20 mm high. Wall thickness is 4 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 110 | mm |
| width | 70 | mm |
| total height | 35 | mm |
| lid height | 20 | mm |
| wall thickness | 4 | mm |
| screw margin | 0 | mm |
| fit clearance | 0.1 | mm |
| cooling zone(s) | no cutouts |
Enclosure with screw-mounted lid STL file: 120×80×35 mm (📦 #2371)
2 object(s) - format STL
Download this enclosure model with screwed lid in 3D STL format. The dimensions are 120 mm long by 80 mm wide and 35 mm high. The cover only is 15 mm high. Side thickness is 3 mm. The enclosure does not have cooling.
| Parameter | Value | Unit |
|---|---|---|
| length | 120 | mm |
| width | 80 | mm |
| total height | 35 | mm |
| lid height | 15 | mm |
| wall thickness | 3 | mm |
| screw margin | 0.1 | mm |
| fit clearance | 0.2 | mm |
| cooling zone(s) | no cutouts |