?>

Round-to-Rectangular Tube Adapter STL file ⌀77 mm to 50×10 mm, thickness 2 mm + offset 📦#1917

STL Download STL
Create a new model:
from scratch search for a model
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀77 mm and a rectangular section with internal dimensions 50×10 mm. The wall thickness is 2 mm and the total length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Generation date: 2025-09-22
3D Model Round-to-Rectangular Tube Adapter STL file ⌀77 mm to 50×10 mm, thickness 2 mm + offset

3D model download

Free
  • round-to-rectangular-adapter-d_model1917-nb0_dd{id}.stl : 2.5 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Round to rectangular adapter template, with the following values:
Parameter Value
#1 cylinder outer diameter 77 mm
#2 cylinder inlet length 15 mm
#3 rectangle internal length 50 mm
#4 rectangle internal height 10 mm
#5 rectangle inlet length 10 mm
#6 offset Z 17.5 mm
#7 offset Y 0 mm
#8 total length 60 mm
#9 thickness 2 mm
#10 chamfer chamfers on the outside
of the cylindrical tube
and on the inside of
the rectangular tube
illustration of the parameters
Representation of the parameters

  • If the chamfer option on the ends is enabled, the chamfer length is equal to half the thickness.
  • The stop at the bottom of the rectangular section has a width equal to half the thickness.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 cylinder outer diameter diaC
#2 cylinder inlet length lentC
#3 rectangle internal length lenIR
#4 rectangle internal height heiIR
#5 rectangle inlet length lentR
#6 offset Z ofsZ
#7 offset Y ofsY
#8 total length lenT
#9 thickness thi
#10 chamfer cha

Related 3D models

To search for a model based on your own parameters, go to the template page Round to rectangular adapter 

Round-to-Rectangular Tube Adapter STL file ⌀60 mm to 50×10 mm, thickness 2 mm + offset (📦 #1498)

1 object(s) - format STL (5.0/5) 3 vote(s)
Round-to-Rectangular Tube Adapter STL file ⌀60 mm to 50×10 mm, thickness 2 mm + offset
Download this 3D model in STL format of a round-to-rectangular adapter with an external diameter of ⌀60 mm and a rectangular section with inner dimensions 50×10 mm. The wall thickness is 2 mm and the overall length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 15 mm
rectangle internal length 50 mm
rectangle internal height 10 mm
rectangle inlet length 10 mm
offset Z 17.5 mm
offset Y 0 mm
total length 60 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀101.6 mm to 50×10 mm, thickness 2 mm + offset (📦 #1870)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀101.6 mm to 50×10 mm, thickness 2 mm + offset
Download this 3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀101.6 mm and a rectangular section with internal dimensions 50×10 mm. The shell thickness is 2 mm and the overall length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 101.6 mm
cylinder inlet length 15 mm
rectangle internal length 50 mm
rectangle internal height 10 mm
rectangle inlet length 10 mm
offset Z 17.5 mm
offset Y 0 mm
total length 60 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀32 mm to 55.1×20 mm, thickness 2 mm (📦 #1921)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀32 mm to 55.1×20 mm, thickness 2 mm
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀32 mm and a rectangular section with inner dimensions 55.1×20 mm. The wall thickness is 2 mm and the overall length is 55 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 32 mm
cylinder inlet length 15 mm
rectangle internal length 55.1 mm
rectangle internal height 20 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 55 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀70 mm to 60×30 mm, thickness 2 mm (📦 #1510)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀70 mm to 60×30 mm, thickness 2 mm
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀70 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 2 mm and the total length is 80 mm. A chamfer is present on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 70 mm
cylinder inlet length 10 mm
rectangle internal length 60 mm
rectangle internal height 30 mm
rectangle inlet length 5 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀65 mm to 60×30 mm, thickness 2 mm (📦 #1509)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀65 mm to 60×30 mm, thickness 2 mm
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀65 mm and a rectangular section with inner dimensions 60×30 mm. The wall thickness is 2 mm and the overall length is 80 mm. A chamfer is present on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 65 mm
cylinder inlet length 10 mm
rectangle internal length 60 mm
rectangle internal height 30 mm
rectangle inlet length 5 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL file ⌀60 mm to 60×30 mm, thickness 2 mm (📦 #1508)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀60 mm to 60×30 mm, thickness 2 mm
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀60 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 2 mm and the total length is 80 mm. A chamfer is present on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 10 mm
rectangle internal length 60 mm
rectangle internal height 30 mm
rectangle inlet length 5 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 100×45 mm, thickness 2 mm (📦 #1907)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 100×45 mm, thickness 2 mm
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀58 mm and a rectangular section with internal dimensions 100×45 mm. The shell thickness is 2 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 58 mm
cylinder inlet length 10 mm
rectangle internal length 100 mm
rectangle internal height 45 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 110×55 mm, thickness 2 mm + offset (📦 #2320)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 110×55 mm, thickness 2 mm + offset
Download this model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 110×55 mm. The wall thickness is 2 mm and the total length is 63 mm. The adapter has an offset of 8 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 20 mm
rectangle internal length 110 mm
rectangle internal height 55 mm
rectangle inlet length 20 mm
offset Z 8 mm
offset Y 0 mm
total length 63 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset (📦 #2323)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀108.7 mm and a rectangular section with internal dimensions 110×55 mm. The shell thickness is 2 mm and the total length is 67 mm. The adapter has an offset of 13 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 108.7 mm
cylinder inlet length 20 mm
rectangle internal length 110 mm
rectangle internal height 55 mm
rectangle inlet length 20 mm
offset Z 13 mm
offset Y 0 mm
total length 67 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×45 mm, thickness 2 mm + offset (📦 #1869)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×45 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀60 mm and a rectangular section with inner dimensions 100×45 mm. The wall thickness is 2 mm and the total length is 90 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 30 mm
rectangle internal length 100 mm
rectangle internal height 45 mm
rectangle inlet length 30 mm
offset Z 15 mm
offset Y 0 mm
total length 90 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀52 mm to 77×33 mm, thickness 2 mm (📦 #2200)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀52 mm to 77×33 mm, thickness 2 mm
Download this 3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀52 mm and a rectangular section with inner dimensions 77×33 mm. The wall thickness is 2 mm and the total length is 100 mm. A chamfer is applied on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 52 mm
cylinder inlet length 20 mm
rectangle internal length 77 mm
rectangle internal height 33 mm
rectangle inlet length 20 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×48 mm, thickness 2 mm + offset (📦 #1862)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×48 mm, thickness 2 mm + offset
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀60 mm and a rectangular section with internal dimensions 100×48 mm. The shell thickness is 2 mm and the overall length is 100 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 30 mm
rectangle internal length 100 mm
rectangle internal height 48 mm
rectangle inlet length 30 mm
offset Z 15 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀20.3 mm to 20×10 mm, thickness 2 mm + offset (📦 #1811)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀20.3 mm to 20×10 mm, thickness 2 mm + offset
Model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀20.3 mm and a rectangular section with internal dimensions 20×10 mm. The wall thickness is 2 mm and the total length is 75 mm. The adapter has an offset of 3 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 20.3 mm
cylinder inlet length 25 mm
rectangle internal length 20 mm
rectangle internal height 10 mm
rectangle inlet length 30 mm
offset Z 3 mm
offset Y 0 mm
total length 75 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 60×60 mm, thickness 2 mm (📦 #1919)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 60×60 mm, thickness 2 mm
Download this 3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 2 mm and the overall length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀20.3 mm to 20×10 mm, thickness 2 mm + offset (📦 #1810)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀20.3 mm to 20×10 mm, thickness 2 mm + offset
Model in STL format of a round-to-rectangular adapter with an external diameter of ⌀20.3 mm and a rectangular section with inner dimensions 20×10 mm. The shell thickness is 2 mm and the overall length is 75 mm. The adapter has an offset of 5 mm along the Y axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 20.3 mm
cylinder inlet length 25 mm
rectangle internal length 20 mm
rectangle internal height 10 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 5 mm
total length 75 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 150×48 mm, thickness 2 mm + offset (📦 #1865)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 150×48 mm, thickness 2 mm + offset
Download this model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀58 mm and a rectangular section with internal dimensions 150×48 mm. The wall thickness is 2 mm and the overall length is 100 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 58 mm
cylinder inlet length 30 mm
rectangle internal length 150 mm
rectangle internal height 48 mm
rectangle inlet length 30 mm
offset Z 15 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 150×50 mm, thickness 2 mm + offset (📦 #1787)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 150×50 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with internal dimensions 150×50 mm. The shell thickness is 2 mm and the total length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 15 mm
rectangle internal length 150 mm
rectangle internal height 50 mm
rectangle inlet length 10 mm
offset Z 17.5 mm
offset Y 0 mm
total length 60 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀75 mm to 99×101 mm, thickness 2 mm (📦 #1847)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀75 mm to 99×101 mm, thickness 2 mm
Download this 3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀75 mm and a rectangular section with inner dimensions 99×101 mm. The wall thickness is 2 mm and the total length is 65 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 75 mm
cylinder inlet length 25 mm
rectangle internal length 99 mm
rectangle internal height 101 mm
rectangle inlet length 16 mm
offset Z 0 mm
offset Y 0 mm
total length 65 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1504)

1 object(s) - format STL (5.0/5) 2 vote(s)
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 80×80 mm, thickness 3 mm
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀63 mm to 80×80 mm, thickness 3 mm (📦 #2067)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀63 mm to 80×80 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀63 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 63 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀56 mm to 80×80 mm, thickness 3 mm (📦 #1845)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀56 mm to 80×80 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀56 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 56 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀65 mm to 50×63 mm, thickness 2 mm (📦 #2228)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀65 mm to 50×63 mm, thickness 2 mm
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀65 mm and a rectangular section with inner dimensions 50×63 mm. The shell thickness is 2 mm and the overall length is 80 mm. A chamfer is applied on the outside of the cylindrical end.
Parameter Value Unit
cylinder outer diameter 65 mm
cylinder inlet length 30 mm
rectangle internal length 50 mm
rectangle internal height 63 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×40 mm, thickness 2 mm + offset (📦 #2104)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×40 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 200×40 mm. The wall thickness is 2 mm and the overall length is 105 mm. The adapter has an offset of 30 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 25 mm
rectangle internal length 200 mm
rectangle internal height 40 mm
rectangle inlet length 20 mm
offset Z 30 mm
offset Y 0 mm
total length 105 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 60×60 mm, thickness 3 mm (📦 #1485)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 60×60 mm, thickness 3 mm
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀20 mm to 100×30 mm, thickness 3 mm + offset (📦 #1941)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀20 mm to 100×30 mm, thickness 3 mm + offset
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀20 mm and a rectangular section with inner dimensions 100×30 mm. The wall thickness is 3 mm and the overall length is 70 mm. The adapter has an offset of 5 mm along the Y axis and 5 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 20 mm
cylinder inlet length 20 mm
rectangle internal length 100 mm
rectangle internal height 30 mm
rectangle inlet length 30 mm
offset Z 5 mm
offset Y 5 mm
total length 70 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 60×60 mm, thickness 3 mm (📦 #1511)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 60×60 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 120 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 20 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 20 mm
offset Z 0 mm
offset Y 0 mm
total length 120 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 119×85 mm, thickness 3 mm (📦 #2243)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 119×85 mm, thickness 3 mm
Download this 3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀110 mm and a rectangular section with internal dimensions 119×85 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 110 mm
cylinder inlet length 10 mm
rectangle internal length 119 mm
rectangle internal height 85 mm
rectangle inlet length 10 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀78 mm to 120×120 mm, thickness 2 mm (📦 #1849)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀78 mm to 120×120 mm, thickness 2 mm
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀78 mm and a rectangular section with internal dimensions 120×120 mm. The shell thickness is 2 mm and the total length is 100 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 78 mm
cylinder inlet length 20 mm
rectangle internal length 120 mm
rectangle internal height 120 mm
rectangle inlet length 20 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 30×30 mm, thickness 2 mm + offset (📦 #2024)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 30×30 mm, thickness 2 mm + offset
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 30×30 mm. The shell thickness is 2 mm and the total length is 100 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 20 mm
rectangle internal length 30 mm
rectangle internal height 30 mm
rectangle inlet length 20 mm
offset Z 2 mm
offset Y 2 mm
total length 100 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 60×40 mm, thickness 3 mm + offset (📦 #1475)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 60×40 mm, thickness 3 mm + offset
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×40 mm. The shell thickness is 3 mm and the overall length is 100 mm. The adapter has an offset of 10 mm along the Y axis and 10 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 40 mm
rectangle inlet length 30 mm
offset Z 10 mm
offset Y 10 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...