Round air vent ∅ 125 mm, slat angle: 35° 📦#1785
Generation date: 2025-09-14
3D model download
Free- round-air-vent-dia125mm-slD35d_model1785-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
0.1
0.1
License: CC BY-NC-ND - Creative commons
(attribution - non commercial use - no derivatives)
Values for this model
This model was generated by the Round air vent grill template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | male diameter | 125 mm |
| #2 | slat angle | 35 ° |
| #3 | slat thickness | 1.6 mm |
| #4 | flange width | 0 mm |
| #5 | central reinforcement | no |
Representation of the parameters
- The total thickness of the vent is 25 mm.
- Whatever the parameters, the slats never overlap. This ensures an optimal airflow. At the same time, the slats form an almost opaque screen along the axis.
- The slats are actually shaped as parallelograms rather than rectangles. This ensures better printability.
- The slats and the central reinforcement (if present) feature a 0.40 mm fillet on all edges. This improves airflow and prevents potential whistling.
- The collar, if present, is 3 mm thick and has a 2 mm fillet for aesthetic purposes.
- The male insertion area is 3 mm thick and has a 1 mm fillet on both edges to facilitate insertion into the intended slot.
- The central reinforcement, if present, is 2 mm thick and spans the entire projected width of the slats.
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 male diameter | dia |
| #2 slat angle | slD |
| #3 slat thickness | slT |
| #4 flange width | flW |
| #5 central reinforcement | renf |
Related 3D models
To search for a model based on your own parameters, go to the template page Round air vent grill
Round air vent ∅ 120 mm, slat angle: 35° (📦 #1786)
1 object(s) - format STL
File of a round air vent for ventilation in STL format. Its male diameter is 120 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This 3D vent grille has no flange.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 120 | mm |
| slat angle | 35 | ° |
| slat thickness | 1.6 | mm |
| flange width | 0 | mm |
| central reinforcement | 0 |
Round air vent ∅ 90 mm, slat angle: 35° (📦 #1291)
1 object(s) - format STL
File of a round air vent for air circulation in STL format. Its insertion diameter is 90 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This vent cover has no flange.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 90 | mm |
| slat angle | 35 | ° |
| slat thickness | 1.6 | mm |
| flange width | 0 | mm |
| central reinforcement | 0 |
Round air vent ∅ 85 mm, slat angle: 35° (📦 #1301)
1 object(s) - format STL
Model of a round vent cover for air circulation in STL format. Its male diameter measures 85 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This 3D aeration grille has a thin flange of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 85 | mm |
| slat angle | 35 | ° |
| slat thickness | 1.6 | mm |
| flange width | 4 | mm |
| central reinforcement | 0 |
Round air vent ∅ 120 mm, slat angle: 30° (📦 #1329)
1 object(s) - format STL (4.0/5) 1 vote(s)
Design of a round grille for ventilation in STL format. Its insertion diameter measures 120 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This 3D vent cover has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 120 | mm |
| slat angle | 30 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 100 mm, slat angle: 40° (📦 #1318)
1 object(s) - format STL
File of a round vent cover for ventilation in STL format. Its male diameter is 100 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. This vent grille has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 100 | mm |
| slat angle | 40 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 100 mm, slat angle: 30° (📦 #1774)
1 object(s) - format STL
File of a round air vent for ventilation in STL format. Its male diameter measures 100 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This aeration grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 100 | mm |
| slat angle | 30 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 150 mm, slat angle: 30° (📦 #1707)
1 object(s) - format STL
Design of a round air vent for ventilation in STL format. Its male diameter is 150 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This ventilation grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 150 | mm |
| slat angle | 30 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 93.6 mm, angle 30° (📦 #1275)
1 object(s) - format STL
3D model of a round air vent for air circulation in STL format. Its male diameter is 93.6 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This 3D vent grille has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 93.6 | mm |
| slat angle | 30 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 85 mm, slat angle: 45° (📦 #1398)
1 object(s) - format STL
3D file of a round air vent for ventilation in STL format. Its male diameter is 85 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent grille features a thin flange of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 85 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 4 | mm |
| central reinforcement | 0 |
Round air vent ∅ 93.7 mm, slat angle: 30° (📦 #1331)
1 object(s) - format STL
Model of a round air vent for ventilation in STL format. Its insertion diameter is 93.7 mm. The slats have a slight angle of 30° and a high thickness of 1.8 mm. This 3D aeration grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 93.7 | mm |
| slat angle | 30 | ° |
| slat thickness | 1.8 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 150 mm, slat angle: 45° (📦 #1287)
1 object(s) - format STL
Design of a round grille for air circulation in STL format. Its insertion diameter is 150 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent cover features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 150 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 100 mm, slat angle: 45° (📦 #1315)
1 object(s) - format STL
Design of a round air vent for ventilation in STL format. Its male diameter is 100 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent grille has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 100 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 85 mm, slat angle: 35° (📦 #1299)
1 object(s) - format STL
Design of a round vent cover for ventilation in STL format. Its insertion diameter measures 85 mm. The slats have an angle of 35° and a high thickness of 1.8 mm. This 3D aeration grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 85 | mm |
| slat angle | 35 | ° |
| slat thickness | 1.8 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 95 mm, slat angle: 45° (📦 #1349)
1 object(s) - format STL
3D model of a round vent cover for ventilation in STL format. Its male diameter measures 95 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This 3D aeration grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 95 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 85 mm, slat angle: 45° (📦 #1283)
1 object(s) - format STL
Model of a round vent cover for air circulation in STL format. Its insertion diameter is 85 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent grille has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 85 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 50 mm, slat angle: 35° (📦 #1708)
1 object(s) - format STL
Design of a round vent cover for ventilation in STL format. Its male diameter is 50 mm. The slats have an angle of 35° and a low thickness of 1.4 mm. This 3D aeration grille features a thin flange of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 50 | mm |
| slat angle | 35 | ° |
| slat thickness | 1.4 | mm |
| flange width | 1 | mm |
| central reinforcement | 0 |
Round air vent ∅ 80 mm, angle 45° (📦 #1264)
1 object(s) - format STL
3D model of a round vent cover for air circulation in STL format. Its insertion diameter measures 80 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This aeration grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 80 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 71.5 mm, slat angle: 40° (📦 #1276)
1 object(s) - format STL
3D file of a round grille for air circulation in STL format. Its insertion diameter measures 71.5 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This vent cover features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 71.5 | mm |
| slat angle | 40 | ° |
| slat thickness | 1.4 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 67.7 mm, slat angle: 40° (📦 #1395)
1 object(s) - format STL
3D model of a round vent cover for air circulation in STL format. Its male diameter measures 67.7 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This 3D ventilation grille has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 67.7 | mm |
| slat angle | 40 | ° |
| slat thickness | 1.4 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 70 mm, slat angle: 45° (📦 #1319)
1 object(s) - format STL
3D file of a round air vent for air circulation in STL format. Its insertion diameter is 70 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent cover has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 70 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 152 mm, slat angle: 45° (📦 #1335)
1 object(s) - format STL (5.0/5) 1 vote(s)
Design of a round vent cover for air circulation in STL format. Its insertion diameter measures 152 mm. The slats have an angle of 45° and a high thickness of 2 mm. This 3D vent grille features a thin flange of 3 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 152 | mm |
| slat angle | 45 | ° |
| slat thickness | 2 | mm |
| flange width | 3 | mm |
| central reinforcement | 0 |
Round air vent ∅ 50 mm, slat angle: 45° (📦 #1332)
1 object(s) - format STL
Model of a round grille for air circulation in STL format. Its insertion diameter is 50 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This 3D vent grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 50 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 0 |
Round air vent ∅ 100 mm, slat angle: 40° (📦 #1473)
1 object(s) - format STL
Design of a round vent cover for air circulation in STL format. Its insertion diameter measures 100 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This ventilation grille features a flange of 10 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 100 | mm |
| slat angle | 40 | ° |
| slat thickness | 1.4 | mm |
| flange width | 10 | mm |
| central reinforcement | 0 |
Round air vent ∅ 90 mm, slat angle: 35° with central reinforcement (📦 #1320)
1 object(s) - format STL
Design of a round grille for ventilation in STL format. Its male diameter is 90 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This ventilation grille features no flange.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 90 | mm |
| slat angle | 35 | ° |
| slat thickness | 1.6 | mm |
| flange width | 0 | mm |
| central reinforcement | 1 |
Round air vent ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #1322)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D design of a round grille for air circulation in STL format. Its insertion diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A vertical reinforcement secures the whole structure. This 3D aeration grille features a thin flange of 3 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 150 | mm |
| slat angle | 40 | ° |
| slat thickness | 1.6 | mm |
| flange width | 3 | mm |
| central reinforcement | 1 |
Round air vent ∅ 93.6 mm, slat angle: 30° with central reinforcement (📦 #1327)
1 object(s) - format STL
3D file of a round vent cover for ventilation in STL format. Its insertion diameter measures 93.6 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A vertical reinforcement reinforces the slats. This ventilation grille features a thin flange of 3 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 93.6 | mm |
| slat angle | 30 | ° |
| slat thickness | 1.6 | mm |
| flange width | 3 | mm |
| central reinforcement | 1 |
Round air vent ∅ 120 mm, slat angle: 45° with central reinforcement (📦 #1333)
1 object(s) - format STL (5.0/5) 1 vote(s)
File of a round grille for ventilation in STL format. Its insertion diameter measures 120 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This 3D vent grille has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 120 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 1 |
Round air vent ∅ 104.6 mm, slat angle: 45° with central reinforcement (📦 #1582)
1 object(s) - format STL
3D file of a round grille for ventilation in STL format. Its insertion diameter measures 104.6 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement reinforces the slats. This vent cover has a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 10... | mm |
| slat angle | 45 | ° |
| slat thickness | 1.6 | mm |
| flange width | 5 | mm |
| central reinforcement | 1 |
Round air vent ∅ 100 mm, angle 45° with central reinforcement (📦 #1266)
1 object(s) - format STL
3D design of a round vent cover for ventilation in STL format. Its insertion diameter is 100 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A central reinforcement strengthens the slats. This 3D ventilation grille features a thin flange of 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| male diameter | 100 | mm |
| slat angle | 45 | ° |
| slat thickness | 1.4 | mm |
| flange width | 5 | mm |
| central reinforcement | 1 |