Round-to-Rectangular Tube Adapter ⌀32 mm to 25×6 mm, thickness 2 mm 📦#1757
Generation date: 2025-09-12
3D model download
Free- round-to-rectangular-adapter-d_model1757-nb0_dd{id}.stl : 2 Mo
STL
Mesh quality :
0.0005
0.05
License: ITE IPU v1.0 - Iteration3d
(Internal and private use, non-commercial – no distribution – no derivatives)
Values for this model
This model was generated by the Round to rectangular adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | cylinder outer diameter | 32 mm |
| #2 | cylinder inlet length | 60 mm |
| #3 | rectangle internal length | 25 mm |
| #4 | rectangle internal height | 6 mm |
| #5 | rectangle inlet length | 60 mm |
| #6 | offset Z | 0 mm |
| #7 | offset Y | 0 mm |
| #8 | total length | 280 mm |
| #9 | thickness | 2 mm |
| #10 | chamfer | chamfer on the outside of the cylindrical tube |
Representation of the parameters
- If the chamfer option on the ends is enabled, the chamfer length is equal to half the thickness.
- The stop at the bottom of the rectangular section has a width equal to half the thickness.
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 cylinder outer diameter | diaC |
| #2 cylinder inlet length | lentC |
| #3 rectangle internal length | lenIR |
| #4 rectangle internal height | heiIR |
| #5 rectangle inlet length | lentR |
| #6 offset Z | ofsZ |
| #7 offset Y | ofsY |
| #8 total length | lenT |
| #9 thickness | thi |
| #10 chamfer | cha |
Related 3D models
To search for a model based on your own parameters, go to the template page Round to rectangular adapter
Round-to-Rectangular Tube Adapter ⌀80 mm to 105×50 mm, thickness 2 mm (📦 #1772)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀80 mm and a rectangular section with inner dimensions 105×50 mm. The wall thickness is 2 mm and the total length is 150 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 105 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀85 mm to 105×50 mm, thickness 2 mm (📦 #1654)
1 object(s) - format STL
Download this 3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀85 mm and a rectangular section with internal dimensions 105×50 mm. The shell thickness is 2 mm and the overall length is 150 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 85 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 105 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 46 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀85 mm to 105×50 mm, thickness 2 mm + offset (📦 #1656)
1 object(s) - format STL
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀85 mm and a rectangular section with internal dimensions 105×50 mm. The shell thickness is 2 mm and the overall length is 150 mm. The adapter has an offset of 15 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 85 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 105 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 46 | mm |
| offset Z | 15 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀85 mm to 105×50 mm, thickness 2 mm + offset (📦 #1655)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀85 mm and a rectangular section with internal dimensions 105×50 mm. The wall thickness is 2 mm and the overall length is 150 mm. The adapter has an offset of 23 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 85 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 105 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 46 | mm |
| offset Z | 23 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 150×50 mm, thickness 2 mm (📦 #1616)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 150×50 mm. The wall thickness is 2 mm and the overall length is 150 mm. A chamfer is applied on the outside of the cylindrical end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 150 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 40 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 150×50 mm, thickness 2 mm (📦 #1615)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 150×50 mm. The wall thickness is 2 mm and the overall length is 150 mm. A chamfer is present on the outside of the cylindrical end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 150 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 80 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 100×100 mm, thickness 3 mm (📦 #1614)
1 object(s) - format STL
Model in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 100×100 mm. The shell thickness is 3 mm and the overall length is 200 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 100 | mm |
| rectangle internal height | 100 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 150×50 mm, thickness 2 mm (📦 #1632)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 150×50 mm. The wall thickness is 2 mm and the total length is 150 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 150 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 80 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 17.8×10.2 mm, thickness 2 mm + offset (📦 #1778)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 17.8×10.2 mm. The shell thickness is 2 mm and the overall length is 240 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 17.8 | mm |
| rectangle internal height | 10.2 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 240 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀50 mm to 200×40 mm, thickness 3 mm (📦 #1682)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀50 mm and a rectangular section with internal dimensions 200×40 mm. The shell thickness is 3 mm and the total length is 250 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 50 | mm |
| cylinder inlet length | 100 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 40 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 250 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀120 mm to 120×120 mm, thickness 2 mm (📦 #1800)
1 object(s) - format STL
Download this model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀120 mm and a rectangular section with internal dimensions 120×120 mm. The shell thickness is 2 mm and the overall length is 200 mm. A chamfer is applied on the outside of the cylindrical end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 120 | mm |
| rectangle internal height | 120 | mm |
| rectangle inlet length | 100 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 2 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀20 mm to 50×30 mm, thickness 3 mm (📦 #1717)
1 object(s) - format STL
3D model in STL format of a round-to-rectangular adapter with an external diameter of ⌀20 mm and a rectangular section with inner dimensions 50×30 mm. The shell thickness is 3 mm and the overall length is 100 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 20 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 50 | mm |
| rectangle internal height | 30 | mm |
| rectangle inlet length | 40 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 100 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀116 mm to 250×40 mm, thickness 2 mm (📦 #1535)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀116 mm and a rectangular section with internal dimensions 250×40 mm. The shell thickness is 2 mm and the total length is 250 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 116 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 250 | mm |
| rectangle internal height | 40 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 250 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀43 mm to 25×6 mm, thickness 2 mm (📦 #1750)
1 object(s) - format STL
Model in STL format of a round-to-rectangular adapter with an external diameter of ⌀43 mm and a rectangular section with internal dimensions 25×6 mm. The wall thickness is 2 mm and the overall length is 100 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 43 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 25 | mm |
| rectangle internal height | 6 | mm |
| rectangle inlet length | 19 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 100 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀128 mm to 60×110 mm, thickness 3 mm + offset (📦 #1784)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀128 mm and a rectangular section with inner dimensions 60×110 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 40 mm along the Z axis. A chamfer is present on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 128 | mm |
| cylinder inlet length | 60 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 110 | mm |
| rectangle inlet length | 60 | mm |
| offset Z | 40 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 2 |
Round-to-Rectangular Tube Adapter ⌀128 mm to 60×110 mm, thickness 3 mm + offset (📦 #1783)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀128 mm and a rectangular section with internal dimensions 60×110 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 40 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 128 | mm |
| cylinder inlet length | 60 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 110 | mm |
| rectangle inlet length | 60 | mm |
| offset Z | 40 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀125 mm to 110×110 mm, thickness 3 mm + offset (📦 #1782)
1 object(s) - format STL
File in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀125 mm and a rectangular section with internal dimensions 110×110 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 40 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 125 | mm |
| cylinder inlet length | 60 | mm |
| rectangle internal length | 110 | mm |
| rectangle internal height | 110 | mm |
| rectangle inlet length | 60 | mm |
| offset Z | 40 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀120 mm to 120×120 mm, thickness 3 mm + offset (📦 #1799)
1 object(s) - format STL
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀120 mm and a rectangular section with internal dimensions 120×120 mm. The shell thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 120 | mm |
| rectangle internal height | 120 | mm |
| rectangle inlet length | 100 | mm |
| offset Z | 2 | mm |
| offset Y | 2 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀80 mm to 60×30 mm, thickness 3 mm (📦 #1474)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 3 mm and the overall length is 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 30 | mm |
| rectangle inlet length | 40 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 90 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀99.5 mm to 170×100 mm, thickness 2 mm (📦 #1691)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀99.5 mm and a rectangular section with internal dimensions 170×100 mm. The shell thickness is 2 mm and the total length is 180 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 99.5 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 170 | mm |
| rectangle internal height | 100 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 180 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀80 mm to 105×50 mm, thickness 2 mm + offset (📦 #1653)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀80 mm and a rectangular section with internal dimensions 105×50 mm. The wall thickness is 2 mm and the total length is 150 mm. The adapter has an offset of 25 mm along the Y axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 105 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 0 | mm |
| offset Y | 25 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀48 mm to 239×24 mm, thickness 3 mm (📦 #1802)
1 object(s) - format STL
Download this model in STL format of a round-to-rectangular adapter with an external diameter of ⌀48 mm and a rectangular section with inner dimensions 239×24 mm. The wall thickness is 3 mm and the overall length is 120 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 48 | mm |
| cylinder inlet length | 40 | mm |
| rectangle internal length | 239 | mm |
| rectangle internal height | 24 | mm |
| rectangle inlet length | 40 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 120 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 180×100.2 mm, thickness 3 mm + offset (📦 #1780)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 180×100.2 mm. The wall thickness is 3 mm and the overall length is 190 mm. The adapter has an offset of 45 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 180 | mm |
| rectangle internal height | 10... | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 45 | mm |
| offset Y | 0 | mm |
| total length | 190 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀20.3 mm to 20×10 mm, thickness 2 mm + offset (📦 #1811)
1 object(s) - format STL
Model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀20.3 mm and a rectangular section with internal dimensions 20×10 mm. The wall thickness is 2 mm and the total length is 75 mm. The adapter has an offset of 3 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 20.3 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 20 | mm |
| rectangle internal height | 10 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 3 | mm |
| offset Y | 0 | mm |
| total length | 75 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀20.3 mm to 20×10 mm, thickness 2 mm + offset (📦 #1810)
1 object(s) - format STL
Model in STL format of a round-to-rectangular adapter with an external diameter of ⌀20.3 mm and a rectangular section with inner dimensions 20×10 mm. The shell thickness is 2 mm and the overall length is 75 mm. The adapter has an offset of 5 mm along the Y axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 20.3 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 20 | mm |
| rectangle internal height | 10 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 0 | mm |
| offset Y | 5 | mm |
| total length | 75 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀102 mm to 170×100 mm, thickness 3 mm (📦 #1680)
1 object(s) - format STL
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀102 mm and a rectangular section with internal dimensions 170×100 mm. The wall thickness is 3 mm and the overall length is 150 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 102 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 170 | mm |
| rectangle internal height | 100 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀100 mm to 50×50 mm, thickness 2 mm (📦 #1497)
1 object(s) - format STL (5.0/5) 2 vote(s)
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 50×50 mm. The wall thickness is 2 mm and the overall length is 100 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 50 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 15 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 100 | mm |
| thickness | 2 | mm |
| chamfer | 0 |