Round-to-Rectangular Tube Adapter ⌀30 mm to 40×12 mm, thickness 4 mm + offset 📦#1542
Generation date: 2025-09-03
3D model download
Free- round-to-rectangular-adapter-d_model1542-nb0_dd{id}.stl : 2.1 Mo
STL
Mesh quality :
0.0005
0.05
License: ITE IPU v1.0 - Iteration3d
(Internal and private use, non-commercial – no distribution – no derivatives)
Values for this model
This model was generated by the Round to rectangular adapter template, with the following values:
| Template parameter | Value | Unit | Label | |
|---|---|---|---|---|
| #1 | cylinder outer diameter | 30 | mm | diaC |
| #2 | cylinder inlet length | 10 | mm | lentC |
| #3 | rectangle internal length | 40 | mm | lenIR |
| #4 | rectangle internal height | 12 | mm | heiIR |
| #5 | rectangle inlet length | 14 | mm | lentR |
| #6 | offset Z | 1 | mm | ofsZ |
| #7 | offset Y | 1 | mm | ofsY |
| #8 | total length | 300 | mm | lenT |
| #9 | thickness | 4 | mm | thi |
| #10 | chamfer | 2 | cha | |
Representation of the parameters
The chamfer field allows the application of chamfers to the ends to facilitate the insertion of the tubes.
Different options are available:
- 0: no chamfer
- 1: chamfer on the outside of the cylindrical tube
- 2: chamfer on the inside of the rectangular tube
- 3: both
Related 3D models
To search for a model based on your own parameters, go to the template page Round to rectangular adapter
Round-to-Rectangular Tube Adapter ⌀120 mm to 60×60 mm, thickness 3 mm (📦 #1511)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 120 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 20 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 20 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 120 | mm |
| thickness | 3 | mm |
| chamfer | 3 |
Round to Rectangular Adapter ⌀125 mm to 60×60 mm, thickness 3 mm (📦 #1502)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀125 mm and a rectangular section with internal dimensions 60×60 mm. The wall thickness is 3 mm and the total length is 120 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 125 | mm |
| cylinder inlet length | 20 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 20 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 120 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀20 mm to 10×5 mm, thickness 3 mm (📦 #1486)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀20 mm and a rectangular section with inner dimensions 10×5 mm. The shell thickness is 3 mm and the overall length is 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 20 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 10 | mm |
| rectangle internal height | 5 | mm |
| rectangle inlet length | 10 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 60 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀60 mm to 60×30 mm, thickness 2 mm (📦 #1508)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀60 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 2 mm and the total length is 80 mm. A chamfer is present on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 60 | mm |
| cylinder inlet length | 10 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 30 | mm |
| rectangle inlet length | 5 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 80 | mm |
| thickness | 2 | mm |
| chamfer | 2 |
Round-to-Rectangular Tube Adapter ⌀65 mm to 60×30 mm, thickness 2 mm (📦 #1509)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀65 mm and a rectangular section with inner dimensions 60×30 mm. The wall thickness is 2 mm and the overall length is 80 mm. A chamfer is present on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 65 | mm |
| cylinder inlet length | 10 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 30 | mm |
| rectangle inlet length | 5 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 80 | mm |
| thickness | 2 | mm |
| chamfer | 2 |
Round to Rectangular Adapter ⌀80 mm to 60×60 mm, thickness 3 mm (📦 #1485)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 100 | mm |
| thickness | 3 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀70 mm to 60×30 mm, thickness 2 mm (📦 #1510)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀70 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 2 mm and the total length is 80 mm. A chamfer is present on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 70 | mm |
| cylinder inlet length | 10 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 30 | mm |
| rectangle inlet length | 5 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 80 | mm |
| thickness | 2 | mm |
| chamfer | 2 |
Round-to-Rectangular Tube Adapter ⌀90 mm to 60×60 mm, thickness 3 mm (📦 #1563)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀90 mm and a rectangular section with inner dimensions 60×60 mm. The wall thickness is 3 mm and the overall length is 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 90 | mm |
| cylinder inlet length | 20 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 20 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 60 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀80 mm to 60×30 mm, thickness 3 mm (📦 #1474)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 3 mm and the overall length is 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 30 | mm |
| rectangle inlet length | 40 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 90 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀100 mm to 90×10 mm, thickness 3 mm (📦 #1476)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 90×10 mm. The shell thickness is 3 mm and the total length is 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 90 | mm |
| rectangle internal height | 10 | mm |
| rectangle inlet length | 10 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 60 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀120 mm to 60×40 mm, thickness 3 mm + offset (📦 #1475)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×40 mm. The shell thickness is 3 mm and the overall length is 100 mm. The adapter has an offset of 10 mm along the Y axis and 10 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 40 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 10 | mm |
| offset Y | 10 | mm |
| total length | 100 | mm |
| thickness | 3 | mm |
| chamfer | 3 |
Round to Rectangular Adapter ⌀60 mm to 50×10 mm, thickness 2 mm + offset (📦 #1498)
1 object(s) - format STL
Download this 3D model in STL format of a round-to-rectangular adapter with an external diameter of ⌀60 mm and a rectangular section with inner dimensions 50×10 mm. The wall thickness is 2 mm and the overall length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 60 | mm |
| cylinder inlet length | 15 | mm |
| rectangle internal length | 50 | mm |
| rectangle internal height | 10 | mm |
| rectangle inlet length | 10 | mm |
| offset Z | 17.5 | mm |
| offset Y | 0 | mm |
| total length | 60 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1528)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the total length is 50 mm. A chamfer is present on the outside of the cylindrical end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 15 | mm |
| rectangle internal length | 80 | mm |
| rectangle internal height | 80 | mm |
| rectangle inlet length | 15 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 50 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1504)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 15 | mm |
| rectangle internal length | 80 | mm |
| rectangle internal height | 80 | mm |
| rectangle inlet length | 15 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 50 | mm |
| thickness | 3 | mm |
| chamfer | 3 |
Round to Rectangular Adapter ⌀120 mm to 60×60 mm, thickness 3 mm + offset (📦 #1482)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with internal dimensions 60×60 mm. The wall thickness is 3 mm and the total length is 150 mm. The adapter has an offset of 45 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 45 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀150 mm to 100×50 mm, thickness 3 mm + offset (📦 #1538)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with inner dimensions 100×50 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 50 mm along the Z axis. A chamfer is present on the outside of the cylindrical end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 150 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 100 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 50 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1527)
1 object(s) - format STL
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀80 mm and a rectangular section with inner dimensions 80×80 mm. The shell thickness is 3 mm and the overall length is 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 80 | mm |
| cylinder inlet length | 15 | mm |
| rectangle internal length | 80 | mm |
| rectangle internal height | 80 | mm |
| rectangle inlet length | 15 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 50 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀100 mm to 50×50 mm, thickness 2 mm (📦 #1497)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 50×50 mm. The wall thickness is 2 mm and the overall length is 100 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 50 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 15 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 100 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 60×60 mm, thickness 2 mm (📦 #1534)
1 object(s) - format STL
File in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 60×60 mm. The shell thickness is 2 mm and the overall length is 100 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 15 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 100 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀120 mm to 200×60 mm, thickness 3 mm + offset (📦 #1533)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀120 mm and a rectangular section with internal dimensions 200×60 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀125 mm to 200×60 mm, thickness 3 mm + offset (📦 #1496)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀125 mm and a rectangular section with inner dimensions 200×60 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 125 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀150 mm to 200×60 mm, thickness 3 mm + offset (📦 #1521)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀150 mm and a rectangular section with inner dimensions 200×60 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 150 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀116 mm to 250×40 mm, thickness 2 mm (📦 #1535)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀116 mm and a rectangular section with internal dimensions 250×40 mm. The shell thickness is 2 mm and the total length is 250 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 116 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 250 | mm |
| rectangle internal height | 40 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 250 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀260 mm to 100×50 mm, thickness 3 mm + offset (📦 #1540)
1 object(s) - format STL
File in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀260 mm and a rectangular section with internal dimensions 100×50 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 50 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 260 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 100 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 50 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀210 mm to 200×60 mm, thickness 3 mm + offset (📦 #1539)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀210 mm and a rectangular section with inner dimensions 200×60 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 210 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀60 mm to 60×30 mm, thickness 2 mm + offset (📦 #1501)
1 object(s) - format STL (4.0/5) 1 vote(s)
Download this model in STL format of a round-to-rectangular adapter with an external diameter of ⌀60 mm and a rectangular section with internal dimensions 60×30 mm. The shell thickness is 2 mm and the total length is 80 mm. The adapter has an offset of 30 mm along the Y axis and 30 mm along the Z axis. A chamfer is present on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 60 | mm |
| cylinder inlet length | 10 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 30 | mm |
| rectangle inlet length | 5 | mm |
| offset Z | 30 | mm |
| offset Y | 30 | mm |
| total length | 80 | mm |
| thickness | 2 | mm |
| chamfer | 2 |