Custom Distribution manifold 3 tubes STL 3D model – Outer diameter 22 mm, wall thickness 1 mm 📦#10148

STL 3D file of a multi-way tubes manifold with 3 tubes, ready to download. The three branches are arranged evenly, with an angular step of 120° between each outlet. The connector is designed for tubes with a 25 mm outer diameter and a 20 mm inner diameter. The wall has a thickness of 2.5 mm. External end fillets improve engagement and reduce snagging on the outer edges. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

STL 3D file of a multi-way ways manifold with 3 ways, ready to download. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. Each branch is sized for tubes with an outer diameter of 20 mm and an inner diameter of 15 mm. The wall has a thickness of 2.5 mm. External fillets are added at the ends to make it easier to slip the connector into ducts or hoses. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

This STL 3D ways distribution manifold with 3 ways is available for download. The three branches are arranged evenly, with an angular step of 120° between each outlet. Each branch is sized for tubes with an outer diameter of 17.3 mm and an inner diameter of 15.3 mm. A wall thickness of 1 mm corresponds to a very thin shell. External fillets are added at the ends to make it easier to slip the connector into ducts or hoses. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

3D STL model of a multi-ways connector with 3 ways, ready to use in your projects. The three branches are arranged evenly, with an angular step of 120° between each outlet. The connector is designed for tubes with a 10 mm outer diameter and a 8.5 mm inner diameter. The wall is very thin, with a thickness of 0.75 mm. External fillets are added at the ends to make it easier to slip the connector into ducts or hoses. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

Download this STL 3D multi-way ways manifold model with 3 ways. The three branches are arranged evenly, with an angular step of 120° between each outlet. The branch sections accept tubes with an outer diameter of 50 mm and provide an internal passage of 30 mm. This thickness (10 mm) corresponds to a very thick wall. External fillets are added at the ends to make it easier to slip the connector into ducts or hoses. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

This STL 3D ways distribution manifold with 4 ways is available for download. The four branches are distributed symmetrically, with an angular step of 90° between each branch. Each branch is sized for tubes with an outer diameter of 20 mm and an inner diameter of 15 mm. This model uses a wall of 2.5 mm. External end fillets improve engagement and reduce snagging on the outer edges. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

Download this STL 3D multi-tubes connector model with 3 tubes. The connector has a Y-shaped layout with 3 tubes, spaced 120° apart around the center axis. The branch sections accept tubes with an outer diameter of 50 mm and provide an internal passage of 46 mm. This thickness (2 mm) corresponds to a thin wall. The external edges at each branch end are softened with fillets, which helps when inserting into an existing duct. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

3D STL model of a multi-ways connector with 3 ways, ready to use in your projects. The connector has a Y-shaped layout with 3 ways, spaced 120° apart around the center axis. The connector is designed for tubes with a 18 mm outer diameter and a 16 mm inner diameter. The wall is very thin, with a thickness of 1 mm. The internal and external edges at each branch end are softened, which makes assembly more comfortable. The model could be adapted for custom installations, hose routing, or technical projects that need a compact distribution fitting.

STL 3D file of a multi-tubes connector with 3 tubes, ready to download. This Y-style model provides 3 tubes, each separated by 120° for a balanced flow split. Each branch is sized for tubes with an outer diameter of 32 mm and an inner diameter of 28 mm. This thickness (2 mm) corresponds to a thin wall. Internal end fillets improve the insertion lead-in and reduce the risk of aggressive burrs. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

Download this STL 3D multi-ways connector model with 3 ways. The three branches are arranged evenly, with an angular step of 120° between each outlet. The connector is designed for tubes with a 12.6 mm outer diameter and a 10.6 mm inner diameter. This part uses a very thin wall (1 mm). Both internal and external fillets are applied at the ends to ease tube insertion and duct engagement. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

STL 3D file of a ways distribution manifold with 3 ways, ready to download. The three branches are arranged evenly, with an angular step of 120° between each outlet. The branch sections accept tubes with an outer diameter of 10 mm and provide an internal passage of 8 mm. A wall thickness of 1 mm corresponds to a very thin shell. The internal and external edges at each branch end are softened, which makes assembly more comfortable. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

3D STL model of a multi-ways fitting with 3 ways, ready to use in your projects. The connector has a Y-shaped layout with 3 ways, spaced 120° apart around the center axis. The branch sections accept tubes with an outer diameter of 8 mm and provide an internal passage of 6 mm. This part uses a very thin wall (1 mm). The ends feature internal and external fillets, reducing sharp edges and making installation easier. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

3D STL model of a ways distribution manifold with 3 ways, ready to use in your projects. This Y-style model provides 3 ways, each separated by 120° for a balanced flow split. The branch sections accept tubes with an outer diameter of 6.3 mm and provide an internal passage of 4.3 mm. The wall is very thin, with a thickness of 1 mm. The ends feature internal and external fillets, reducing sharp edges and making installation easier. This multi-way connector could be used in ventilation setups, air distribution lines, or fluid circuits where the flow needs to be split.

Download this STL 3D multi-ways connector model with 3 ways. The three branches are arranged evenly, with an angular step of 120° between each outlet. The connector is designed for tubes with a 5 mm outer diameter and a 3 mm inner diameter. The wall is very thin, with a thickness of 1 mm. The ends feature internal and external fillets, reducing sharp edges and making installation easier. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

This STL 3D multi-way hoses manifold with 3 hoses is available for download. The connector has a Y-shaped layout with 3 hoses, spaced 120° apart around the center axis. Each branch is sized for tubes with an outer diameter of 5 mm and an inner diameter of 2.9 mm. The wall is thin, with a thickness of 1.05 mm. The ends feature internal and external fillets, reducing sharp edges and making installation easier. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

This STL 3D multi-way hoses manifold with 4 hoses is available for download. This cross-style model offers 4 hoses, spaced regularly by 90° around the center. The branch sections accept tubes with an outer diameter of 24 mm and provide an internal passage of 21 mm. The connector features a thin wall (1.5 mm). The internal and external edges at each branch end are softened, which makes assembly more comfortable. It could be used to branch off flexible ducts, hoses, or rigid pipes in custom layouts.

STL 3D file of a multi-ways fitting with 4 ways, ready to download. This cross-style model offers 4 ways, spaced regularly by 90° around the center. The branch sections accept tubes with an outer diameter of 30 mm and provide an internal passage of 18 mm. This part features a thick wall of 6 mm. Internal fillets are added at the ends to make tube insertion easier and reduce snagging. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

3D STL model of a tubes distribution manifold with 4 tubes, ready to use in your projects. This cross-style model offers 4 tubes, spaced regularly by 90° around the center. Each branch is sized for tubes with an outer diameter of 28 mm and an inner diameter of 25 mm. This thickness (1.5 mm) corresponds to a thin wall. Internal end fillets improve the insertion lead-in and reduce the risk of aggressive burrs. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

Download this STL 3D multi-hoses fitting model with 4 hoses. The connector uses a cross-shaped layout, with 4 hoses set 90° from one another. Each branch is sized for tubes with an outer diameter of 35 mm and an inner diameter of 25 mm. This part features a thick wall of 5 mm. The internal and external edges at each branch end are softened, which makes assembly more comfortable. The model could be adapted for custom installations, hose routing, or technical projects that need a compact distribution fitting.

3D STL model of a ways distribution manifold with 4 ways, ready to use in your projects. The four branches are distributed symmetrically, with an angular step of 90° between each branch. The branch sections accept tubes with an outer diameter of 12 mm and provide an internal passage of 8.5 mm. The wall is thin, with a thickness of 1.75 mm. Internal fillets are added at the ends to make tube insertion easier and reduce snagging. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

STL 3D file of a multi-hoses connector with 3 hoses, ready to download. The connector has a Y-shaped layout with 3 hoses, spaced 120° apart around the center axis. The branch sections accept tubes with an outer diameter of 46.5 mm and provide an internal passage of 40.5 mm. The wall thickness is 3 mm. The internal and external edges at each branch end are softened, which makes assembly more comfortable. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

Download this STL 3D multi-ways fitting model with 4 ways. The connector uses a cross-shaped layout, with 4 ways set 90° from one another. The branch sections accept tubes with an outer diameter of 10 mm and provide an internal passage of 8 mm. This part uses a very thin wall (1 mm). The internal and external edges at each branch end are softened, which makes assembly more comfortable. This part could suit extraction systems, air-cooling setups, or any project where a flow has to be routed toward several outlets.

STL 3D file of a multi-ways fitting with 3 ways, ready to download. The three branches are arranged evenly, with an angular step of 120° between each outlet. The branch sections accept tubes with an outer diameter of 50 mm and provide an internal passage of 40 mm. A thickness of 5 mm corresponds to a thick wall. The internal and external edges at each branch end are softened, which makes assembly more comfortable. The model could be adapted for custom installations, hose routing, or technical projects that need a compact distribution fitting.