?>

L-bracket 3D Files - Length 200 mm and over | page 2

Model(s) 31 to 34 of 34

Support bracket 250×225 mm STL file, thickness 8 mm, hole diameter 5 mm (📦 #2683)

1 object(s) - format STL
Support bracket 250×225 mm STL file, thickness 8 mm, hole diameter 5 mm
Download this file of a corner bracket with a reinforcing bar in STL 3D format. The dimensions are 250 mm in length, 225 mm in height, 30 mm in width, and 8 mm in thickness. The drill holes are designed with a diameter of 5 mm. Chamfers are applied to the holes for a cleaner fit of the screws. The reinforcing bar improves rigidity and provides two openings for screwdriver access. No support is needed to print this bracket, printed flat on the build plate.
Parameter Value Unit
length 250 mm
height 225 mm
width 30 mm
thickness 8 mm
hole diameter 5 mm
chamfer on the holes yes

Shelf bracket 250×200 mm STL file, thickness 8 mm, hole diameter 5 mm (📦 #2717)

1 object(s) - format STL
Shelf bracket 250×200 mm STL file, thickness 8 mm, hole diameter 5 mm
Download this 3D model of a corner bracket with reinforcement in STL 3D format. The dimensions are 250 mm in length, 200 mm in height, 20 mm in width, and 8 mm in thickness. The mounting holes are designed with a diameter of 5 mm. Chamfers are applied to the holes to improve the seating of the heads. The central reinforcement bar reduces bending and includes two passages for screwdriver access. Support generation is not required for printing this bracket, placed flat on the print bed.
Parameter Value Unit
length 250 mm
height 200 mm
width 20 mm
thickness 8 mm
hole diameter 5 mm
chamfer on the holes yes

Angle bracket 250×200 mm STL 3D file, thickness 12 mm, hole diameter 5 mm (📦 #2738)

1 object(s) - format STL
Angle bracket 250×200 mm STL 3D file, thickness 12 mm, hole diameter 5 mm
Download this 3D file of a corner bracket with reinforcement in STL format. The dimensions are 250 mm in length, 200 mm in height, 25 mm in width, and 12 mm in thickness. The screw holes are designed with a diameter of 5 mm. Chamfers are applied to the holes to seat the screw heads. The reinforcing bar enhances mechanical strength and includes two clearances for screwdriver access. This bracket prints without support, placed flat on the print bed.
Parameter Value Unit
length 250 mm
height 200 mm
width 25 mm
thickness 12 mm
hole diameter 5 mm
chamfer on the holes yes

Right-angle bracket 250×200 mm STL file, thickness 8 mm, hole diameter 5 mm (📦 #2801)

1 object(s) - format STL
Right-angle bracket 250×200 mm STL file, thickness 8 mm, hole diameter 5 mm
3D file of a mounting bracket reinforced in STL format. The dimensions are 250 mm in length, 200 mm in height, 39 mm in width, and 8 mm in thickness. The drill holes are designed with a diameter of 5 mm. Chamfers are applied to the holes to seat the screw heads. The central reinforcement bar reduces bending and provides two passages for fastening. No support is needed to print this bracket, lying flat on the build plate.
Parameter Value Unit
length 250 mm
height 200 mm
width 39 mm
thickness 8 mm
hole diameter 5 mm
chamfer on the holes yes
Can't find the right model? Create it with your parameters